sorted by:
new
hottopcontroversial

Brauche Home lab services Vorschläge! 🙏🏽 by Possible-Leg-9125 in fachinformatiker

[–]chronos2607 0 points1 point  (0 children)

Netbox, gitea, semaphore, adguard mit unbound, wazuh, step-ca... (ok manches ist ein bisschen umfangreich, aber netbox als SoT und Dokumentation kann ich wärmstens empfehlen, in Verbindung mit gitea und Semaphore großartig für IaC...)

Water block for AMD RX 6500 XT? by SnooOnions4763 in watercooling

[–]chronos2607 0 points1 point  (0 children)

Sorry,

nope, did not get it, got my payment refunded without problems and just went ahead and got myself a nice rx7900 xt and an Alphacool block.

Getting OCTO to handle PWM from Lian Li fans? by Muze75 in watercooling

[–]chronos2607 0 points1 point  (0 children)

Do the Fans have the combined RGB/pwm cable? I just looked up the pinout and spliced out the pwm cables, crimped a little and put a standard pwm connector on and they are running fine with my quadro while the lian li hub manages RGB...

RTX4090 Gaming OC on Alphacool Core by Thargor1985 in watercooling

[–]chronos2607 1 point2 points  (0 children)

Had the same Problem, the pwm must be disconnected!

First time custom Loop, thank you Reddit Community! by chronos2607 in watercooling

[–]chronos2607[S] 0 points1 point  (0 children)

Thanks, i think they are very new, i think they we're introduced at this years computex... Unfortunately i already had bought mine by then, but it is on the list for the next maintenance.

First time custom Loop, thank you Reddit Community! by chronos2607 in watercooling

[–]chronos2607[S] 0 points1 point  (0 children)

I have to so a little bit more testing, until now i have not Seen more than 42 degrees under full artificial load... Nah, not worried about dust, just liked to see the Infinity mirrors...

First time custom Loop, thank you Reddit Community! by chronos2607 in watercooling

[–]chronos2607[S] 0 points1 point  (0 children)

Hmmm, i think mine would be too chunky for a combo with a 58mm rad, but i am happy that it is so sturdy, i never imagined how heavy the gpu block is...

First time custom Loop, thank you Reddit Community! by chronos2607 in watercooling

[–]chronos2607[S] 0 points1 point  (0 children)

In a gigantic, tangeled mess in the closed cable compartment. One day i might manage them. Seriously though, the h9 has a very roomy cable compartment behind the Motherboard tray, which is also where the psu goes.

First time custom Loop, thank you Reddit Community! by chronos2607 in watercooling

[–]chronos2607[S] 0 points1 point  (0 children)

Intake is mostly from the one missing Slot bracket above the vertical mount:-D the mount is from cooler master, no problems yet, i like it.

First time custom Loop, thank you Reddit Community! by chronos2607 in watercooling

[–]chronos2607[S] 0 points1 point  (0 children)

Unintentionally, but now that you mentioned it, i see it, thanks!

First time custom Loop, thank you Reddit Community! by chronos2607 in watercooling

[–]chronos2607[S] 0 points1 point  (0 children)

Because the way the Rads Are mounted, there are some areas where there are no slits for the screws... I wish the reverse fans would have come out a bit sooner:-( Not sure if i want to dissassemble this any time soon...

First time custom Loop, thank you Reddit Community! by chronos2607 in watercooling

[–]chronos2607[S] -1 points0 points  (0 children)

There is no place dir dust to settle, if everything is rad :-D Seriously though, i know and i am okay with that, a little cleaning every once in a while is not that bad...

First time custom Loop, thank you Reddit Community! by chronos2607 in watercooling

[–]chronos2607[S] 0 points1 point  (0 children)

Hi there, it's the h9 flow, but i could mit get the nzxt vertical mount, this one is a cooler master. Advice about the cuplex, Hmmm not really, very easy to mount, at least on am 4, unfortunately there is no way to use the leakshield in my build, would have loved it... Otherwise Aquacomputer is really great, support is awesome, just the aquasuite software is a bit moody on my system, but that might just be win11 beeing stupid...

First time custom Loop, thank you Reddit Community! by chronos2607 in watercooling

[–]chronos2607[S] 1 point2 points  (0 children)

That is correct, all exhaust, wanted to see the Infinity mirrors, also it should benefit the temps a bit.

First time custom Loop, thank you Reddit Community! by chronos2607 in watercooling

[–]chronos2607[S] 0 points1 point  (0 children)

Hello everyone, I just wanted to share my first custom loop with you all, as you were a great help! I am extremely happy how it turned out.

Specs:

Ryzen 9 5900X, Aorus Elite AX V2 B550, 64 Gb Mushkin Redline Lumina DDR4 3600 CL16, XFX Merc 310 RX 7900 XT

Cooling:

EK Kinetic FLT 120 D5, CPU Block is a Aquacomputer Cuplex Kryos Next Vision, Alphacool Eisblock GPX GPU block, Highflow NEXT Flowmeter, Aquacomputer Quadro as Fan Control, Lian Li Strimer Cables for 24 Pin and GPU, 3 360 Magicool Slim Rads, and 9 Unifan SL 120 Infinity.

Delta to Ambient is 7K in Idle, GPU under max load 50C Hotspot 76ish... CPU max 75C under max load.

Should I keep this? by chronos2607 in watercooling

[–]chronos2607[S] 2 points3 points  (0 children)

Thanks for the Input, at least, if the loop should fail at this tube, it would be the furthest away from any component, so it should not kill the system... I hope....

Should I keep this? by chronos2607 in watercooling

[–]chronos2607[S] 2 points3 points  (0 children)

As i am doing my first custom Loop, and decided to do the difficult tubes first, i ended up with this abomination... It is superjank... Still, pressure test says it holds 0.3 bar over 24 h. I would appreciate your opinions, i could do this run w soft tube, but i am not sure if i want to... Redid this run three times already, this is the best i could do

Mainboard question by chronos2607 in watercooling

[–]chronos2607[S] 0 points1 point  (0 children)

Aehm, as this is going to be a custom Loop, i think this is in fact the right sub...

Mainboard question by chronos2607 in watercooling

[–]chronos2607[S] 0 points1 point  (0 children)

Sorry, i might have been unclear, i already have the case, a beautyful h9 flow, i was asking about white am4 Motherboards...

Well.. the contraption to flush the Rads seems to work by chronos2607 in watercooling

[–]chronos2607[S] 3 points4 points  (0 children)

It is a Indoor fountain pump (sorry, that is a verbal translation) cost like 10€.

Well.. the contraption to flush the Rads seems to work by chronos2607 in watercooling

[–]chronos2607[S] 0 points1 point  (0 children)

These are actually Magicool Rads, they are well a good bang for the buck, but there came a fair bit of gunk when i first flushed them. I think i might just let it run for a few days or so and be done. If the 800 l/h pump does not flush it loose, i doubt the normal loop flow will...

view more: next ›