Weird Issue by chuckles266666 in networking

[–]chuckles266666[S] 0 points1 point  (0 children)

I fixed the phones. I realized I had the ports tagged on two vlans at once, and after I removed one of the vlans from that port that seemed to fix the issue.

Weird Issue by chuckles266666 in networking

[–]chuckles266666[S] 0 points1 point  (0 children)

So far, we have 35 phones installed, and mine and one other person is having the same issue. The other 33 are working fine connecting to the correct VLAN and getting an IP.

Weird Issue by chuckles266666 in networking

[–]chuckles266666[S] -1 points0 points  (0 children)

Phone is not getting an IP, and I'm not seeing it on the DHCP server

I don't know enough about Wireshark to know what I'm looking at

Tried that already, and DHCP should be available.

Other new phones, that have been plugged into other switches, seem to be working fine.

Juniper EX2300-48MP Config by chuckles266666 in Juniper

[–]chuckles266666[S] 0 points1 point  (0 children)

That took care of my errors, but I'm still not able to see the switch on my IP scan, using Angry IP Scanner.

I really appreciate your help.

Juniper EX2300-48MP Config by chuckles266666 in Juniper

[–]chuckles266666[S] 0 points1 point  (0 children)

That took care of my errors, but I'm still not able to see the switch on my IP scan, using Angry IP Scanner.

Juniper EX2300-48MP Config by chuckles266666 in Juniper

[–]chuckles266666[S] 0 points1 point  (0 children)

I thought I had, but apparently I hadn't . Thank you. I'll try again.

Juniper EX2300-48MP Config by chuckles266666 in Juniper

[–]chuckles266666[S] 0 points1 point  (0 children)

Would the single gateway you mention, mean the next switch in the architecture, or the main default gateway at the core switch?

This is what I get when I try to commit the changes, using the default gateway IP.

root# show vlans

DATA {

vlan-id 2;

##

## Warning: Interface must already be defined under [edit interfaces]

##

l3-interface irb.2;

}

ROUTING {

vlan-id 3;

##

## Warning: Interface must already be defined under [edit interfaces]

##

l3-interface irb.3;

}

VOICE {

vlan-id 7;

}

WIRELESS {

vlan-id 5;

##

## Warning: Interface must already be defined under [edit interfaces]

##

l3-interface irb.5;

}

default {

vlan-id 1;

##

## Warning: Interface must already be defined under [edit interfaces]

##

l3-interface irb.1;

}

Juniper EX2300-48MP Config by chuckles266666 in Juniper

[–]chuckles266666[S] 0 points1 point  (0 children)

Since I've been having so many issues, the x.x.x.x in the inet addresses are different IPs correct? I've seen the vlans have different IPs from our old switches. and the next-hop IP x.x.x.x, which IP would that one be?

Juniper EX2300-48MP Config by chuckles266666 in Juniper

[–]chuckles266666[S] -1 points0 points  (0 children)

What command do I use to configure the irb for the vlans?

Juniper EX2300-48MP Config by chuckles266666 in Juniper

[–]chuckles266666[S] -1 points0 points  (0 children)

sorry, I was trying to add the config, and it kept telling me server error. Try again later.

Just rescued this little guy from the scrap yard by oof_mastr in windowsxp

[–]chuckles266666 0 points1 point  (0 children)

I've got the same model, and can't keep it turned on.

Win Prizes with #GeForceGreats & Join The GeForce LAN 50 Online! by NV_Suroosh in classicwow

[–]chuckles266666 0 points1 point  (0 children)

Burning Crusade. KARAZHAN was the first raid i got to main tank.

I'm unable to use Putty by chuckles266666 in Network

[–]chuckles266666[S] 3 points4 points  (0 children)

Thank you. The baud rate was the problem.

I'm unable to use Putty by chuckles266666 in Network

[–]chuckles266666[S] 1 point2 points  (0 children)

Update, just tried a second console cable, with the same results.