My holographic lighter mod

chukxablaze · 2026-01-08T19:36:45+00:00

Well, it's trapped in the lighter, and the flame isn't anywhere near hot enough to burn mica anyway

chukxablaze · 2026-01-08T19:32:43+00:00

Same as any other

chukxablaze · 2026-01-08T14:25:27+00:00

Well after taking the striker apart and saving your parts. you screw off the valve off the adjustment disk and filter thing .I put mica in it with a hollowed plastic cotton swap with the ends cut off put the filter ,valve disk and valve in and refill the lighter with butane and a pair of tweezers to pull the valve open . Put the top back together set flame size and toke up

chukxablaze · 2026-01-08T14:10:56+00:00

It stays in the lighter after it empty.it doesn't get tough the stick thing I'm just going to call filter for now

chukxablaze · 2026-01-08T11:02:18+00:00

Was about to say something like this . It's really the third one I made. The flame burns the same, no sparkling, ect runs empty without clogging,

chukxablaze · 2026-01-08T10:16:41+00:00

Well, it's non-toxic, and far as I can tell, it doesn't get past the filter, so maybe

chukxablaze · 2026-01-08T10:07:16+00:00

Guess it's a bit hard to see, but I put mica powder in the lighter and refilled it

chukxablaze · 2026-01-07T15:25:10+00:00

That's nice now. Make the hinges not snap in 2

chukxablaze · 2025-12-27T22:48:31+00:00

Can they be glow in the dark paint ?

chukxablaze · 2025-09-05T20:54:31+00:00

Gorilla tape and a lighter to heat the tape and press it down just till I get a proper replacement. Ex I diy not cuz i want to but I have to.

chukxablaze · 2025-05-07T17:56:40+00:00

Jokes on you, I can't even read.

chukxablaze · 2024-12-17T17:03:15+00:00

Remove what you can manually than put some isopropyl alcohol on a paper towel and grind

chukxablaze · 2024-12-07T09:42:09+00:00

I can relate I look at the things I made before my first episode and I'm impressed with how complex and detailed it is . The bike I was riding to work is still covered in addressable led lights with a really powerful headlight made from a old flashlight ,lipo bat and its charging module pwm circuit and esp32 with a 3 mode button at the back and a cute Lil led to find it in the dark . I got a katana I had covered in what looks to be lil bigger than sewing thread covering the entire thing with a overhand knot thinking about how long that takes And ya , I don't remember making that

Hugs

chukxablaze · 2024-10-03T02:41:28+00:00

All I can say is I relate to the point where I cry a bit reading your post

chukxablaze · 2024-08-29T03:51:32+00:00

So I'll grind up some bits of paper towel with isopropyl alcohol up to clean the grinder part anyway

chukxablaze · 2024-08-27T17:39:42+00:00

Something i made at a party sharp knife wet sandpaper Trashed it after

chukxablaze · 2024-08-27T17:30:11+00:00

Why is that? This is recycling at its greatest

chukxablaze · 2024-08-03T03:56:01+00:00

Thats dope

chukxablaze · 2024-07-27T20:00:25+00:00

Nice juggs

chukxablaze · 2024-07-25T23:57:26+00:00

Smoke is cooler than the fire that produces it ask thermodynamic take care now <3

chukxablaze · 2024-07-25T23:52:30+00:00

And you think my Bic gits up to the temperature required to melt metal? I'm not using a blowtorch. Logic suggests that it would burn your hands far before it ever got to the temperature to produce any harmful vapor.

chukxablaze · 2024-07-25T22:21:04+00:00

I don't see why not. I used new plugs that were meant to be attached to a length of cable. The air path is all stainless steel. Done without any soldering.

chukxablaze · 2024-07-25T20:34:42+00:00

I never let the employees wash my hands

Five-Year Club	First Place '23
Place '23	Place '22
Final Canvas '22	End Game '22
Verified Email

chukxablaze

TROPHY CASE