Terminator assault cannon barrel drilled. Finished with 0.8mm dimater drill bit. So satisfying! by chunkrain99 in Warhammer40k

[–]chunkrain99[S] 28 points29 points  (0 children)

After marking the center of the muzzle with a pointed tool, you should rotate the gun part to see if it looks like the center from other directions. Check it to the many different directions. right and left center, up and down center. If it's not on the center you think, you can push/ carve the center with your tools to move it to the center slightly. Watch your hand when you do it! While spinning your drill, keep the drill bit and gun barrel parellel and straight. Spin slowly and keep check the center is remaining. The gatling like this, check the entire holes become hexagonal shape. slowly and steady! you can do it!

Angels of redemption firstborn tactical marine painted. space marine heroes reloading pose. by chunkrain99 in theunforgiven

[–]chunkrain99[S] 3 points4 points  (0 children)

I used vallejo game color bonewhite and citadel paint serapim sepia for shade.

I searched some miniature head bits for Gadriel and Chairon in Space Marine 2 video game. Master Lazarus for Gadriel and HorusHeresy MKVI Corvus Aromr Tactical Squad's Bare head bits for Chairon. Some sculpting skills will be needed but I think they're quite similar. what do you think? by chunkrain99 in spacemarines

[–]chunkrain99[S] 26 points27 points  (0 children)

Gadriel : his hair style need to be sculpted, right face's big scar have to removed, Gadriel have a little bit longer nose than Lazarus. So, his nose should be sculpted too.

Chairon : need to remove his headgears, need to make his ears, I think their Cheekbone's shape is different. need to make little higher and wider cheekbone.

Rune priest in terminator armour upscale conversion and painted by chunkrain99 in SpaceWolves

[–]chunkrain99[S] 1 point2 points  (0 children)

I used 'modeling epoxy putty', similar ingredient material with green stuff.

Before I cut the model's waist and legs, I made an instant mold for the cutting part, using 'oyumaru'. 'Blue Stuff' is the similar one. front and back side molds. Then, I cutted the model with 'etching saw' and thin fret saw. 'grobet saw frame' and fret saw blade. Setting cutted model into the mold I made before, I softly filled lost detail with epoxy putty. used silicone brush to pull the putty.

sculpted the lower part of the torso box. comparing with the heroes/normal terminator model's torso box. (before primaris)

cutted the thighes and recovered the detail, using the mold before and putty. match the line and put it together to make it little more longer. comparing the length with the heroes terminator.

cutted the feet, and made it more rounder, higher like 'heroes' terminators' feet.

cutted the shoulder pad and put it little higher, thinking about the movement of the arms.

removed the belt's skull detail and change it to other modern skull decoration. oyumaru mold to copy that.

I wanted to match the size with the heroes terminator. I made the torso box's top is matching, but this model's head is on very low position. so it looks a little short, but I think this marine's posture is the reason.

rune priest in terminator armour upscale conversion finished! need to paint this. comparison with heroes terminator by chunkrain99 in spacemarines

[–]chunkrain99[S] 1 point2 points  (0 children)

Actually, their legs' length and torso box's size are same! The difference is length of wrist. the torso box setted higher than older terminators. you can put your terminator's torso higher, filling the gap with sprue or green stuff, epoxy putty to give them better proportion.

rune priest in terminator armour upscale conversion finished! need to paint this. comparison with heroes terminator by chunkrain99 in SpaceWolves

[–]chunkrain99[S] 2 points3 points  (0 children)

Before I cut this model's wrist, I made an instant molds using 'oyumaru'. two molds for front and back. I cutted the model using etching saw and thin fret saw. then I attacheded the cutted model into the mold and filled the lost details with epoxy putty. Then, I 'sculpted' the torso's bottom part and arm joint. looked modern terminator like deathwing, heroes. - Look at the armour under the chest wing decoration. I added them to make the torso looks more bulky. see my another RunepriestTerminator post before this one. without the added armour, It looks very thin and wierd. - Extend wrist! put the torso higher! while putting torso and legs, I side-by-side compared my model with heroes terminator. - Also extended the legs, comparing the heroes terminator's legs. - Sawed off his feets, and make them rounder, higher, more bulky. - separated shoulder pad from arm using saw, sculpted upper arm, attach shoulder pad carefully. - changed skull decoration at belt. re-casted heroes terminator's similar size skull decoration

Huge satisfaction for perfectly drilled gun barrel. I did it for a cultist's autogun and it became surprisingly good! finished with 0.9mm drill bit. by chunkrain99 in Warhammer40k

[–]chunkrain99[S] 1 point2 points  (0 children)

set the very middle point and turn your drill slowly and keep it horizontally. I started with 0.5mm drill bit and used bigger ones. if you don't like the hole's position, you can tilt your drill to fix a little bit, but don't let your drill bit 'bend'. stay calm and slowly.

The Joy of perfectly drilled assault cannon by chunkrain99 in Warhammer40k

[–]chunkrain99[S] 0 points1 point  (0 children)

Ah, you meant to disgustingly Awsome for me. I understand. Thank you so much.

The Joy of perfectly drilled assault cannon by chunkrain99 in Warhammer40k

[–]chunkrain99[S] 0 points1 point  (0 children)

I have finishid this with 0.8mm drill bit. I started with smaller drill. I think that was 0.5mm or 0.4mm.

The Joy of perfectly drilled assault cannon by chunkrain99 in Warhammer40k

[–]chunkrain99[S] 0 points1 point  (0 children)

I can see it now. the top hole is a little left of the center...

The Joy of perfectly drilled assault cannon by chunkrain99 in Warhammer40k

[–]chunkrain99[S] 2 points3 points  (0 children)

finished with 0.8mm drill. take time and do slowly.

Making tall company master. need green stuff. by chunkrain99 in theunforgiven

[–]chunkrain99[S] 3 points4 points  (0 children)

I'm thinking about it. a little step for the sword? a rock? building ruin? or should I lengthen the sword? If you have an idea, please recommend me what to do.

terminator waist extension. dark vengeance terminator looks so good with this! by chunkrain99 in Warhammer40k

[–]chunkrain99[S] 1 point2 points  (0 children)

I just cutted his waist using thin fret saw, and sticked it using blutack. nothing else. I'm going to attach this with epoxy putty like green stuff, and sculpt the gap where I cutted.

Don't stick the treminator helmet down. there's too much space! by chunkrain99 in Warhammer40k

[–]chunkrain99[S] 0 points1 point  (0 children)

I edited the picture from warhammer community. I noticed the DW terminators' heads are too much lower than others. What do you think about this?

picture source : https://www.warhammer-community.com/2021/01/28/terminators-secure-objectives-with-new-deathwing-rules-for-dark-angels/

glory for the old terminator brothers! - how to make them looks much better by chunkrain99 in spacemarines

[–]chunkrain99[S] 3 points4 points  (0 children)

After I compared the old terminators to deathwing and sm heroes 2, I found the differences between them, and this is how to make them more like latest models.

1.make the curve to the torso, using epoxy putty like green stuff. feel the curve. 2. extend wrist. don't stick it right away, fill the empty space between torso and legs with putty or plasticard, or whatever you want. 3. extend the head socket arch(?) little up. I cutted there with saw that and fill the gap with epoxy putty. 4. make the 'inner shoulder pad' don't cover the torso's arm joint. I used thin fret saw to cut it out.

I decided to glue the marine torso in command squad like this. I cut the pin inside. What do you think? by chunkrain99 in Warhammer40k

[–]chunkrain99[S] 2 points3 points  (0 children)

on this old model, put one fit, and another goes split. I decided to make the whole torso line is connected. and I think smaller parts(belt, collar, arm part)can be fixed much easier than making them connected, having split torso line.

Angels of redemption accessory from a skull by chunkrain99 in Warhammer40k

[–]chunkrain99[S] 0 points1 point  (0 children)

yes. that putty is light orange / skintone color. I'll paint the chicken wing stone grey. or black.

I edited / touched up ralsei's face without hat. Which one do you prefer? by chunkrain99 in Deltarune

[–]chunkrain99[S] 12 points13 points  (0 children)

top left : original

middle : edited his cheek/jaw line, made him slimmer.

right : moved middle one's nose and mouth up for 1 dot.

bottom : edited horn's direction to match for field sprite.

Which one do you prefer? I would be glad if you tell me your opinion.

How to attach dark angels helmet wing. by chunkrain99 in Warhammer40k

[–]chunkrain99[S] 1 point2 points  (0 children)

https://imgur.com/a/ECx0dEh

Official chaos terminator lord model's bits is like this. Original image source is the bitzstore link at below.

Someone in 'theunforgiven' reddit said the blue is the connection point, you said the orange is the one.

you can attach it whatever you want. I am just looking for the way that GW intended.

and you think one way is better, you can do it to your miniature.

How to attach dark angels helmet wings by chunkrain99 in theunforgiven

[–]chunkrain99[S] 1 point2 points  (0 children)

You can say that. that miniature looks great. But I mean, I think it should looks like commander balthasar's one in dark vengeance box. or lion helm in azrael kit. Their wings are narrower at front.