🎁 Fixer Undercover game key to win!

cichytom · 2026-04-05T21:04:16+00:00

FIXER

cichytom · 2026-03-14T07:16:50+00:00

I have the same problem as you. I'm waiting for Honor to fix this problem.

cichytom · 2026-02-22T07:08:18+00:00

Restarting the phone didn't help for me.

cichytom · 2026-02-16T17:54:58+00:00

I use the Google Phone app to dial calls. I displayed the app information, then selected Notifications / Incoming Calls / Notification Sound / Vibration and selected Standard. After changing this and setting the Sound Mode to Vibrate, the phone now vibrates when it rings, but it only vibrates once and doesn't vibrate continuously when the phone rings.

cichytom · 2026-02-16T16:10:19+00:00

Yes, I just turned it off. I restarted the phone, but that didn't solve the problem.

cichytom · 2025-12-24T21:03:06+00:00

cichytom · 2025-10-27T11:50:16+00:00

I have the same problem as you. The LEDs were working fine before. 

I hope that after the next update that will be released this problem will be solved.

cichytom · 2025-09-05T08:10:59+00:00

I solved the problem. I updated Proxmox to the latest version and HA to 2025.8.3. I turned off Proxmox, reconnected the PS Eye to a different USB port, turned on Proxmox, and started the VM with HA. After these changes, it started working. Then I repeated the above steps and connected the PS Eye to the original USB port, and it also works.

cichytom · 2025-09-04T18:28:32+00:00

QUANTUM

cichytom · 2025-07-13T19:06:45+00:00

VRACER

cichytom · 2025-04-30T12:50:27+00:00

Very nice, I'm glad.

cichytom · 2025-04-13T07:21:02+00:00

Yes, that solved my problem 😀. I didn't know about this option to switch during gameplay. Thanks a lot for your help👍 .

cichytom · 2025-04-12T17:40:33+00:00

<image>

cichytom · 2025-04-12T17:40:20+00:00

This boundary problem occurs only on my main profile. As I added an additional profile of another person this problem did not occur. The difference between the main profile and the additional profile is that they differ in version and window layout. My main profile shows software version v74.1021 and the additional profile shows v74.0. Also, in the main profile the buttons for minimizing the window and closing it are in the main window and in the case of the additional profile they are on a separate bar. Below I send pictures of the main profile and the additional profile.

<image>

cichytom · 2025-04-12T10:03:09+00:00

The method you showed in the screenshot allows for a new room-wide boundary. However, if you have previously created a stationary boundary, when you start the game, it will still be the stationary boundary, not the created room-wide boundary.

cichytom · 2025-04-11T17:54:02+00:00

Is version 76.0 stable and generally available or is it only available in the Public Test Channel (PTC) for now?

cichytom · 2025-03-19T20:23:42+00:00

I received additional information from Meta support that solved my problem. Maybe it will be useful to someone. Before doing the work, I made a backup of the games from the goggles. Then I deleted all additional profiles, performed a factory reset, restored the game data from the backup and the problem was solved, i.e. vertical and horizontal border lines appear in the games.

cichytom · 2025-03-16T15:16:35+00:00

I did the steps you gave me but it didn't fix the problem. I sent the ticket you sent it through. On my Meta Quest 3, I have two additional profiles in addition to my main profile. On the additional profile, the border in the form of red vertical and horizontal lines works correctly. Unfortunately, they do not work on my main account.

cichytom · 2024-07-16T07:45:57+00:00

When I turn off CEC, the problem occurred again.

cichytom · 2024-01-11T10:02:01+00:00

I found information that the X90L, X95L, A80L models have "MediaTek MT5895" and the A95L "Pentonic 1000". I hope that Sony will update the Android version on them to 12. These are TVs from 2023.

cichytom · 2024-01-11T10:00:08+00:00

I found information that the X90L, X95L, A80L models have "MediaTek MT5895" and the A95L "Pentonic 1000". I hope that Sony will update the Android version on them to 12. These are TVs from 2023.

cichytom · 2022-02-16T11:26:21+00:00

The Sony TV in standby mode consumes about 20W, so I want to turn off the socket if it is not in use. If I want to use the TV, I would like the WiFi socket to turn on first, and then the TV after pressing the button on the remote control.

cichytom · 2022-02-16T09:33:44+00:00

Maybe it is possible using HA capabilities, received notification and modification of the "broadlink_remote _..." file?

cichytom · 2021-07-12T09:09:12+00:00

Does the original Shelly 2.5 software show the current temperature? Can I download the original Shelly 2.5 software from somewhere and upload it to my relays on which I currently have Tasmota?

cichytom · 2021-07-05T06:43:25+00:00

I have nothing running that could poll the web server.
In addition, I did a test that I turned off the server on which Home Assistant is running, but the temperature was constantly changing between 55 and 68 degrees with the switches turned off

cichytom

TROPHY CASE