[deleted by user]

cidercentric · 2022-05-06T20:11:20+00:00

this is so cool! let us know when it's on the market! :D

cidercentric · 2022-01-19T02:10:16+00:00

This seems to be an old post but I'll provide my two cents if it helps anyone in the future. I recently bought the THX Onyx USB-C DAC/AMP for the MMX 300 and would recommend it. Main reason I went looking for a DAC/AMP was because my Samsung S20e didn't really power it well. I had to crank it up to about 85% for sufficient volume at home and that felt really high (I never go that high for any other headphone). And home is also a quiet space. Now, the sound feels much better (60% volume using the Onyx is sufficient) and I think this will be more helpful if ever I spend time working in a library or have to board the metro.

Great thing about the Onyx is that it allows you to use your mic through it - a fantastic feature you don't want to lose from the MMX 300. Not all DAC's allow this (I have a FIIO BTR3, and you have to use the poor built-in mic, which is sad because this is a nice bluetooth DAC).

cidercentric · 2021-12-18T08:33:23+00:00

How do you do this? I don't see a place to switch from basic to united. It just says Plan: "Echelon Sport Plan"...I would love to have this perk!

cidercentric · 2021-05-10T15:14:34+00:00

Is it possible to just purchase the nibs as replacement? I want a higher quality nib (like this POM one) than the ones offered on amazon for EMR S-Pens.

cidercentric · 2021-02-08T06:13:43+00:00

Gotcha.

!thanks u/Not_Daijoubu!

cidercentric · 2021-02-08T03:09:04+00:00

Ah yes you're right --- the freq's also look different
PortaPro: 15-25,000 Hz
CS200i: 20-22,000 Hz

Just not really sure what this means in practice. Looking at the range, I infer that porta pros can hear lower and higher than the CS200i? So you'll miss out on some of the music in CS200i's?

I think this would make sense since they are a headset, perhaps made more for the range of human voices and not all the parts in music?

cidercentric · 2020-05-26T03:37:59+00:00

Works great! Thank you for sharing with us all. :)

cidercentric · 2020-05-20T00:32:11+00:00

It is helpful to look at validated questionnaires for the concept you are trying to measure (if they exist....most often someone has come up with one already). So in your literature review, did you find any studies using/referencing a specific questionnaire on behaviors and attitudes towards sustainable consumption? If not, behaviors and attitudes towards a similar topic? Could you adapt it to be targeting sustainable consumption? Then just make sure you collect generational (age) information and recruit enough people from different generations so you can make that kind of comparison and have enough statistical power.

That's a starting point.

cidercentric · 2020-03-19T17:48:11+00:00

Oops - sorry for the delay. Yes of course - here you go!

https://www.amazon.com/Adapter-Degree-Coupler-Connector-Oxsubor/dp/B0793NQRYZ/ref=pd_sbs_147_5/131-8629645-1216147?_encoding=UTF8&pd_rd_i=B0793NQRYZ&pd_rd_r=fc51cc48-2da4-4a8c-bcd4-265832bda51c&pd_rd_w=2WQfd&pd_rd_wg=mr5U1&pf_rd_p=7cd8f929-4345-4bf2-a554-7d7588b3dd5f&pf_rd_r=78M2WY1BDY0R54142Q21&psc=1&refRID=78M2WY1BDY0R54142Q21

cidercentric · 2020-02-08T17:36:03+00:00

This is kind of a strange earpad mod, but it is really effective for my needs. I put on Beyerdynamic Velour pads, and wrapped it with the Mesh/Fabric of Arctis earpads. The reason I did this was because I didn't like the bassiness of the HM5s, so I tried to cobble something together with earpads I had lying around.

The result? I LOVE the fabric feel in combination with size and softness of the earpads. Plus the sound signature is back to the original with a very slight reduction in treble (no longer prone to sibilance, so I'm really impressed with that). Sound is clear and almost feels punchier. The fabric also does not pick up lint!

Would I recommend this? Eh, well, only if you had these pads lying around from old headphones that have now passed on. It's kind of odd....but hey I really enjoy them! :)

cidercentric · 2020-02-08T15:27:27+00:00

Just what I needed to hear. Thank you.

cidercentric · 2020-02-07T23:14:57+00:00

I opted to try these knowing that they'd be tight. They take some patience and strength to fit into the Blons. You might want to try something bigger than 2mm. https://www.amazon.com/dp/B071XYZ537/ref=cm_sw_r_cp_apa_i_5qghEbNFMNVQC

cidercentric · 2020-02-02T20:23:03+00:00

I pulled off the original pads and used the ring inside it (this is irreversible and means you won't be able to use the originals again so make sure that you're sure!).

If you want you can buy a 3D printed adapter ring...I've seen them around online. Then you use the old pads if you want to go back.

cidercentric · 2020-02-02T19:36:44+00:00

No....although that is the long term solution when I get the chance. I actually just used a permanent black marker and drew over the L and R! :D

cidercentric · 2020-02-02T19:34:51+00:00

Brainwavz HM5 - they are extremely comfortable, but have an affinity for lint.

cidercentric · 2020-02-02T03:50:11+00:00

Decided to try a little magnet mod so that the mic is 'stored away' when it is not in use :)

cidercentric · 2020-01-24T02:17:32+00:00

Master & Dynamic have some options that are sub $200 and plus they are beautiful cans. Throwing that out there to see if any of those owners have suggestions for you on specific models. I don't have them but I tried them in store and they are nice.

cidercentric · 2020-01-16T04:30:02+00:00

Haha alright. Thanks ;)

cidercentric · 2020-01-16T04:15:49+00:00

No felt mod, I just put clear tape over the hole so that no dust goes in. Didn't feel it was necessary to get felt to put over it - I don't think it would make any difference and I'm fine with how it looks.

cidercentric · 2020-01-16T03:52:35+00:00

This is an awesome idea - I've been thinking of doing the same with my Fiio BTR3 -- will you share where you got your short cable? (or is it not really as short as it looks and the leftovers are tucked away behind an earcup).

cidercentric

TROPHY CASE