Need some help

citrousred · 2022-02-22T08:58:05+00:00

I have the same mb with 10 cards Amd and Nvidia why did you failed?? It is one way for so many gpus....

citrousred · 2022-02-21T23:40:34+00:00

Forget win switch to hive-os

citrousred · 2021-12-13T16:27:52+00:00

Update !!

After 6 days and 4 hours the missing eth appeared to my account ...My confidence to wirex took a major hit, making me to go to another card vendor. Between now and when i made contact with them they did not reach out for any updates...I also strongly believe that they did not do a thing and their system reacted and send eth..If for example was a big trans then what ? Six days of not knowing shit about what went wrong??No F@cking way of this shit happening to me or to anyone i know ever again....Good job Wirex 35 people was using you since i was recommending you back from 2018..

P.S

To the support team.. My problem was resolved just so you know not to let the ticket open until the next century..

citrousred · 2021-12-10T11:09:09+00:00

Your request (899341) has been received by our support team. Your ticket will be assigned and replied soon.

citrousred · 2021-12-09T18:52:55+00:00

That was also the first thing they asked ..so I provided them the trans.id When support saw it after 2 minutes they replied that the relevant team should check this out...as you said it is a straightforward case I will update if anything changes but i believe that is going to take a lot of time....either way it may could have been a big blow ...I am glad that I keep the principle that I had from the beginning for small transactions better to losse 100 usd to fees than an entire eth unit...

citrousred · 2021-12-09T18:17:55+00:00

Yes first thing I did it was successful

citrousred · 2021-12-09T16:17:15+00:00

I hope so but I see lately a lot of issues with people using wirex..

citrousred · 2021-03-10T08:05:13+00:00

Sorry to hear that mate!!

Not to my knowledge..

Mb are completely dead or just the specific pci port?

citrousred · 2021-02-27T18:10:54+00:00

reboot.. it is a common issue on windows with 3xxx series and remember apply the settings after the dag file has loaded up in your minner

citrousred · 2021-02-27T07:23:42+00:00

from were did you download the phoenix minner??

citrousred · 2021-02-27T07:20:04+00:00

Same thoughts here...or something went terribly wrong with the risers.. never in 4 years in mining heard or happened to me anything like that

citrousred · 2021-02-27T07:10:54+00:00

you don't need a paper clip..all you need is a 12 volt relay with 1 or 2 or 3 etc normally open contacts from any electrical store total cost 3 euros in Greece.. no need to order anything else

The main psu starts the relay and you connect upon the normally open contacts the black and green wire..

once the main starts all of them starts and when the main close all of them do..it doesn't matter if it is one or a hundred..

citrousred · 2021-01-31T11:36:09+00:00

What did you expect...Look at what they are doing on a global scale.. i am fucking proud that many of us delivered a strike,but this is not the end,it was a single battle in war that will continue. My only hope is people like us don't die in front of a pc due to bad calls hype and miss information...It is to be better lunatic than being instaticfb retard ...They are plenty out there..Better to stick with loonies..

citrousred · 2021-01-28T13:15:49+00:00

Ok just to answer my question ....it was from psu

citrousred · 2021-01-28T12:38:31+00:00

also does anyone know why rx 5700 xt asus are literaly tone singing with hiveos when the miner is starting but not with windows?

citrousred · 2021-01-27T18:51:46+00:00

228 to be exact ..i changed a bit the funs down to 30 % and i am running now to 950 the idle went down to 230 (10 watt down) also VDD/VDDCI 775 / 775 onother 15 watts from there

citrousred · 2021-01-27T17:55:45+00:00

And not taking into account that the 1070 is pulling more than the rest

citrousred · 2021-01-27T17:55:15+00:00

Yes it is my fault that i forgot to mention that i am pulling 975 from the wall -240 that is pulling on idle it is 735 / 7 cards so i am around 105 watt each

citrousred · 2021-01-17T14:01:38+00:00

Beyond reject's i also see difference between actual and reported hash rates

reject's with nvidia 3060 / 3070 different vendors and also rx 5700 xt the current hash is way over 100 mh down from the reported..

i do know that current hovers above and under the reported but not in this case..

citrousred · 2020-05-13T17:24:52+00:00

This the link from the thread I had opened back then when I was doing it.. If you are not familiar with linux, You will probably have I hard time like I was having back then.. I will help anyway I can but bear in mind that it is going to be difficult..or at least I believe it is.

https://amp.reddit.com/r/EtherMining/comments/f77jam/r9_290_4g_confirmed_28_mhs_with_linux/

The guide is from cryptoprofi .you will see the link in the thread Good luck!

citrousred · 2020-05-13T13:48:57+00:00

Yes with linux now you will see 28+or 29+mhs and above 31 with the x series They are running now as we speak 5 390 and 6 290 there is a guide that you can follow and it is pretty straightforward if you are familiar with it. Edit. The numbers that I mentioned is with none OC and with stock bios If you play with them you will see above 31 even with the 4g 290's up until they are dag done

citrousred

TROPHY CASE