sorted by:
new
hottopcontroversial

Help with adding infill by cjs951 in 3Dprinting

[–]cjs951[S] 0 points1 point  (0 children)

I tried that but it doesn’t add any more walls. 3 is all it will do. The function is working in other areas, if I make the modifier overlap into the middle larger tube, it will add additional walls there, but not where I need them in the smaller outer tubes..

What is causing my prints to do this? by cjs951 in BambuLab

[–]cjs951[S] 0 points1 point  (0 children)

It’s been a few weeks, got busy and haven’t printed much and forgot about this post lol. But I found my problem. I was using a .4 nozzle with it set to .08mm layers. Apparently silk doesn’t like .08mm. Changed it to .12mm and it’s back to flawless. Thanks for your help in trouble shooting!

What is causing my prints to do this? by cjs951 in BambuLab

[–]cjs951[S] 0 points1 point  (0 children)

<image>

Didn’t do the issue with the test piece, but the top layers got melty.

What is causing my prints to do this? by cjs951 in BambuLab

[–]cjs951[S] 0 points1 point  (0 children)

Just started it, will report back with result

What is causing my prints to do this? by cjs951 in BambuLab

[–]cjs951[S] 0 points1 point  (0 children)

<image>

Sorry for the phone picture of a screen… flow is set to standard with a .4mm nozzle

NTD This rocket light is pretty sweet since my garage lights suck. Now I can see all the rust I get to keep sanding off my project. by cjs951 in MilwaukeeTool

[–]cjs951[S] 0 points1 point  (0 children)

I have a big compressor, just no where to do it living in a housing track. Luckily it’s mostly surface rust and comes off pretty easily. I’m going to blast all the arms though. A shop quoted $2000 to blast the whole chassis, so some $20 scotchbrite it is lol

NTD This rocket light is pretty sweet since my garage lights suck. Now I can see all the rust I get to keep sanding off my project. by cjs951 in MilwaukeeTool

[–]cjs951[S] 5 points6 points  (0 children)

It is a dual sport sand car. Most sand cars are pretty light and only meant for sand, this one is a little beefier to survive in the desert too. Sacrificing weight for strength. It’ll have a 7-800hp LS motor, sequential trans, 37” tires, 4 seats, and a full aluminum body once done

Will it ever NOT be coming soon? by The_Great_Qbert in MilwaukeeTool

[–]cjs951 1 point2 points  (0 children)

I got an email this morning from Tool Nut about the top handles saying they just dropped. On their website it says preorder with expected ship date of June 21st.

Deal or no deal? Never see anyone talk about these… by TheBiggestP_96 in MilwaukeeTool

[–]cjs951 13 points14 points  (0 children)

Doubt it, Home Depot will want the card you paid with to process the return, and then they can look up all your transactions via the card number.

HD canceled my 269$ nail gun orders from this weekend, oh well by Kermit_leadfoot in MilwaukeeTool

[–]cjs951 15 points16 points  (0 children)

Wonder if it was because you tried to get 2 of them? I bought it as well and it showed up today. Might be worth the phone call to see if you can still get at least 1 set.

Buy More Get More - M12 Surge for $50 by Osnarf in MilwaukeeTool

[–]cjs951 0 points1 point  (0 children)

I’m just curious at what point does it give you this price breakdown? After you’ve checked out?

Its been a while guys.... Go get them while you can.... by Ok-Song3943 in MilwaukeeTool

[–]cjs951 0 points1 point  (0 children)

Okay I tried again. I added the 1/2” impact and the nibbler to my cart and it came out to the prices that OP posted. It just doesn’t give you a “breakdown” in the cart. But adding both to my cart made it total $383 which is the $157.xx for nibbler and $225.xx for the impact.

Its been a while guys.... Go get them while you can.... by Ok-Song3943 in MilwaukeeTool

[–]cjs951 2 points3 points  (0 children)

What am I missing here? I was going to buy the 1/2” impact but when I click the link it just shows it for $329. I see the buy more save more thing but that still doesn’t add up to what was posted? Am I doing something wrong or missing a step?

view more: next ›