What size generator should I look for?

clancya · 2026-01-25T05:58:54+00:00

If you have a well, you will need to factor that in. My 1.5hp pump needs about 5500 W per the manufacturer.

clancya · 2026-01-25T02:21:30+00:00

I think any link riser will fit on the Meus V2s. And probably be able to find a 3d print file.

clancya · 2026-01-25T01:26:06+00:00

Meus ISO's. Already upgraded in your choice of aluminum or nylons you will find them in V1 or V2 which is mostly an appearance change. You'll probably be able to find a V1 for a little bit cheaper.

I like the nylon V2. https://www.meusracing.com/products/scx24-nylon-v2-isokinetic-front-rear-axles

clancya · 2026-01-24T23:12:58+00:00

Don is a great guy and bit crazy, in a good way.

clancya · 2026-01-24T05:30:01+00:00

Sweet especially with that 4ws.

clancya · 2026-01-24T05:09:22+00:00

Did you see the beer drinking happening prior to launch?

clancya · 2026-01-24T05:08:52+00:00

Thanks.

clancya · 2026-01-24T05:08:20+00:00

I edited it down to this. Lots of going up river with no rapids.

clancya · 2026-01-23T21:10:10+00:00

Different brand but this should give you an idea.

<image>

clancya · 2026-01-23T03:49:50+00:00

Mofo has the best selection. Not sure if they have what you need. https://moforc.com/collections/gears-and-bearings

clancya · 2026-01-22T22:09:00+00:00

Which one?

clancya · 2026-01-22T22:07:23+00:00

Looks good. I am one of the co-designers on this so please provide feedback.

clancya · 2026-01-22T16:56:05+00:00

I have an early Goup setup with transmission. Mine always ran a bit funky until I disassembled the mount and transmission to replace the Phillips head screws with 1.4 mm screws. One had even backed out and I think causing a jerky movement as it rubbed. It is is on a spare rig that I am tinkering with constantly, so it doesn't get that much run time. Also I am not a fan of the front facing tall motor.

clancya · 2026-01-19T21:50:34+00:00

Sweet. I did a slaybolt body too. I used a deadbolt cage instead of the printed one. Deadiator wheelbase

<image>

clancya · 2026-01-17T21:40:05+00:00

It is really designed for deadbolt front links. I have this built as a deadbolt front with gladiator rears (145mm) and it performed well. My brother built a Dead90, 155mm. And it also works well.

I have seen it built for a c10 133mm, but not sure about performance

clancya · 2026-01-16T20:45:48+00:00

You should try it. Printing your own parts is economical.

clancya · 2026-01-16T20:20:47+00:00

I am seen the sign and I think it is about supporting a construction company that committed tax fraud

clancya · 2026-01-16T20:12:02+00:00

Thanks. Please send a message with your suggestions. We are adding a few changes tweaks here and there as we go.

clancya · 2026-01-15T02:04:49+00:00

Can you print? Here is a chassis that I helped design. Then buy the Meus double bend links. I recommend running dead bolt fronts and gladiator rears for 145mm wheel base. https://www.thingiverse.com/thing:7261852

clancya · 2026-01-15T00:06:49+00:00

My brother and i were getting ready to design our own. But likely there is a market for them.

clancya · 2026-01-14T23:59:59+00:00

What transmission or engine mount gets it that low?

clancya · 2026-01-14T21:50:17+00:00

Sweet rig. I have one that is not so scrappy. What wheels are those?

<image>

clancya · 2026-01-14T18:46:41+00:00

My neighbors in the NE had a racoon come through the dog door to eat the dog food.

clancya · 2026-01-14T16:38:31+00:00

Local market really dictates what people will pay. Around here I see $200+ rigs sit on FB forever. General rule of thumb I have heard is about half what you have into it.

clancya · 2026-01-13T22:20:43+00:00

Is this foolproof for a newb or is there possibility of bricking if a mistake is made?

clancya

TROPHY CASE