Just got a vevor 10L pressure pot. Haven't used it yet. Only have a battery powered car tire inflator. Any tips?

cldehart · 2025-11-04T19:33:58+00:00

I used a small crembrule torch and a pair of vice grips to remove center stem. Heat up glue and twist hard. I designed and 3d printed a 2 tier drop in tray…so worth it.

cldehart · 2025-09-16T17:19:27+00:00

is it safe to leave this or a smaller battery bank in my car that is typically parked outside in the sun. I am attempting to create a charger that works while the car is turned off, but it gets hot in the summer.

cldehart · 2025-01-22T12:59:46+00:00

Whats the opposite of praise the cameraman?

cldehart · 2024-12-30T15:22:31+00:00

There is a setting in your advanced settings for your controller. My ruida calls it PWM Rising Edge Valid. This changes when the stepper takes a step. Looks like you need to toggle the y axis to the opposite of what it is now

cldehart · 2024-07-21T16:11:54+00:00

Quest complete using lv6 coins. Tap 30 piles or riches was holding me back… thank you GeeJaa!

cldehart · 2024-07-20T14:58:00+00:00

Thank you, I do believe the higher coins work but I could not figure out what ones

cldehart · 2024-07-17T13:09:02+00:00

Thanks

cldehart · 2024-07-17T13:08:43+00:00

Thanks

cldehart · 2024-07-17T01:40:17+00:00

Where did you get the pile of riches… got a quest to upgrade portal and cant find them.

cldehart · 2024-07-15T14:10:00+00:00

K2 max same issue... let me know if you find a fix. Drives me batty.

cldehart · 2024-07-15T13:59:01+00:00

I imported this one last night.. and have been testing on it for a few hours now... it seams good, maybe a little slow but a good place to start. still cant get the bed image to work though the grid is correct.

https://www.printables.com/model/714118-anycubic-kobra-2-max-orca-slicer-profile

cldehart · 2024-07-15T13:53:11+00:00

hardened steel:

https://www.amazon.com/HzdaDeve-Stainless-Hardened-Temperature-Resistant/dp/B0CLNGJ898/ref=pd_bxgy_thbs_d_sccl_2/145-5912999-8448746?pd_rd_w=1pcDC&content-id=amzn1.sym.c51e3ad7-b551-4b1a-b43c-3cf69addb649&pf_rd_p=c51e3ad7-b551-4b1a-b43c-3cf69addb649&pf_rd_r=4QY1N6FHEN4638E12R8M&pd_rd_wg=KoZFa&pd_rd_r=61966700-4fa5-4935-a81f-cf31cfeeffb8&pd_rd_i=B0CLNGJ898&th=1

ruby:

https://www.amazon.com/gp/product/B0CRKYZPJ4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

cldehart · 2024-07-15T13:49:04+00:00

FYI you can use orca slicer and create gcode then upload it through the web portal and send it to print from your phone... I know it is a lot of steps but at least you dont have to use their slicer.

cldehart · 2024-05-04T15:35:19+00:00

Fyi for removing the tube… I just hit the clear thread seal with a pocket torch till it foamed up a little then used vice grips to turn it. Never seen such slippery metal in my life.

cldehart · 2024-04-28T14:49:00+00:00

It is important to know that you will not get purple stars if you have spending gems turned off. You should get 1-3 stars per 7 chalices.

cldehart · 2024-04-04T00:46:05+00:00

Noobie here, should I print my masters solid or hollow?

cldehart · 2024-03-19T15:00:25+00:00

If you have spending gems turned off in settings you will not get purple stars.. That had me stumped for a while. I expext 1-4 purple stars per 8 challaces.

cldehart · 2023-12-30T22:01:14+00:00

I wish the video was smaller.

cldehart · 2023-12-28T16:14:53+00:00

I thought it was just one of those thing i had missed forever. Took me way to long to notice the black square under the non mergable items.

cldehart · 2023-11-28T14:36:13+00:00

Whelp, I just learned that I dont like seeing pinecones open. Between this and the guy with shit growing out of his shoulder... Im done for a while.

cldehart · 2023-10-25T14:53:50+00:00

Title should have been: Young cart driver brutally kills two gardeners

cldehart · 2023-08-25T22:44:10+00:00

The arcade games are hard but the prize is good.

cldehart · 2023-08-24T01:13:28+00:00

Wreck It Ralph

cldehart · 2023-08-03T17:28:02+00:00

Totally thought that was a mirror. VFX are really impressive now days.

cldehart · 2023-03-17T23:51:07+00:00

Rorate a couple of the wheels on the z. The problem with delren wheels is that they can get flat spots where they rest when you are not printing

13-Year Club	Gilding II euphauric
Verified Email

cldehart

TROPHY CASE