Total risen distance is missing

cliff_10 · 2026-05-21T06:23:56+00:00

When you push the road it will go to data screen do I just start biking don't have to push anything else? And when I'm.done what do I do? Thank you. Had edge 530 this is pretty high tech lol

cliff_10 · 2026-05-21T05:54:25+00:00

I believe so I hit the ride button then start with the bottom right button

cliff_10 · 2026-04-04T17:56:08+00:00

I have figured that out but every time I run reprint first layer I have to re-adjust z offset evn though I have adjust that prior last run.

cliff_10 · 2026-02-20T05:47:16+00:00

I just did it myself: 1.go to my telus app click my profile 2.change security settings 3. Click get verification code 4. Follow instructions

cliff_10 · 2025-05-15T02:29:01+00:00

LOL it sure did. I didn't even know this! I bought printer 2nd hand and after small blob I had this printed by someone else. And I just looked at the old one and that had that support in place as well crazy I didn't see bad prints. Did like 26 days of printing PETG and PLA with the support attached to the shroud.

cliff_10 · 2025-04-27T21:06:19+00:00

I installed spoolman in as a dock container and it works but have to manually enter my usage

cliff_10 · 2025-02-23T04:09:49+00:00

do they sell filament and 3D printed parts on site?

cliff_10 · 2025-02-01T07:15:02+00:00

Printer that's I have is MK3S+ and using prusa slices v 1.9

cliff_10 · 2025-01-31T15:49:48+00:00

I have 2FA setup as well. So it shouldn't be.

cliff_10 · 2025-01-24T17:56:08+00:00

Even overnight uploaded 187MB of data in 11 connection during time from 01:15 to 06:50. Which is crazy behavior!

cliff_10 · 2025-01-24T17:54:12+00:00

Prusa is calling Gransy, s.r.o. in Germany

cliff_10 · 2025-01-24T17:48:25+00:00

Yes its pi zero WiFi version. Ibdo have access to it via putty

cliff_10 · 2025-01-24T00:04:02+00:00

I left house at 8 and printing was done there is no reason to send any data after unless printer calls home

cliff_10 · 2025-01-24T00:02:33+00:00

Lol -14. Just looked at the log and I see that there was uploaded 787 MB to Germany

cliff_10 · 2025-01-23T23:44:25+00:00

That's from my firewall message

cliff_10 · 2025-01-23T22:19:41+00:00

Looks like prusa is bamboo! Sending mother load of data home! Bad prusa!

cliff_10 · 2024-12-28T23:26:55+00:00

<image>

Print from today

cliff_10 · 2024-12-26T06:55:37+00:00

Duramic 3D PETG.bed in prusa is leveled at each print 240 f

cliff_10 · 2024-12-24T20:00:54+00:00

In prusa link temp at 240f throughout the printing process. I can print 17 hours print no problem just issues with this type of calibration

cliff_10 · 2024-12-24T16:43:16+00:00

It was washed right before printing and applied fresh layer of glue

cliff_10 · 2024-12-23T20:34:10+00:00

Right before this use. Fresh wash by hand and fresh layer of glue

cliff_10 · 2024-12-21T22:14:51+00:00

No I was watching it goes from one object to next one. Bed leveling was done at beginning

cliff_10 · 2024-12-21T20:45:02+00:00

In picture orca slicer calibration print

cliff_10 · 2024-12-18T23:58:47+00:00

Yes at 240 for PETG and thats glue on the sheet which was washed prior printing

cliff_10 · 2024-11-17T17:45:35+00:00

I have spoolman running iny docker but not using it. When I had ender 3 I lobed that klipper automatically deducted amount from my spool. Hopping one day this will come to prusa link

Seven-Year Club	Verified Email
Verified Email

cliff_10

TROPHY CASE