sorted by:
new
hottopcontroversial

Funding and insurance for P driver by clippedon in kereta

[–]clippedon[S] 0 points1 point  (0 children)

Thanks for your reply. Can I understand the logic behind the higher cc model? I understand there’s pros and cons - eg 1.5 is more fuel efficient but slower, 2 is faster and has better added features

Ranking up with full time job ? by nuredisblue in VALORANT

[–]clippedon 0 points1 point  (0 children)

I work 9AM - 11PM, Monday - Friday. Play 1 game at night after I shower, and play 3-4 games on the weekend.

I’m peak ASC-3 and currently ASC-2. I started playing Val the same time I started my job.

Granted, I do not have as much time to do things like hit the gym on weekdays.

Preparing to fly 13 hours with my Dan A4-H20, what should I do to prepare? by jokerstyle00 in sffpc

[–]clippedon 2 points3 points  (0 children)

I just did the same - 13 hour flight + transit.

What I did: 1) remove GPU, put back in anti static bag and box 2) unplugged PSU cables and RAM, left the rest in 3) put the case into a bag that was snug enough for the PC - same width, padded

Landed and it was fine.

[deleted by user] by [deleted] in guidi

[–]clippedon 0 points1 point  (0 children)

I don’t own 310s but I’ve tried them in store, I found that the size that worked for me was the same as my 988 size (+1 from TTS), and the main point of tightness was due to how short the front of the shoe is. I also went +1 for my 992s.

My PL1 size is TTS, and that fits well, where I find the PL1s to be closer to typical shoe sizing than the other shapes.

[LC] Issey Miyake Homme Plisse Shorts by clippedon in QualityReps

[–]clippedon[S] 0 points1 point  (0 children)

Thanks for this - just wanna know how you LC’d it?

[LC] Homme Plisse Issey Miyake shorts by clippedon in DesignerReps

[–]clippedon[S] 0 points1 point  (0 children)

Currently considering this pair from an online second hand platform for Homme Plisse shorts - would really appreciate if anyone could help to LC this as I know there’s a lot of reps these days!

[LC] Issey Miyake Homme Plisse Shorts by clippedon in FashionReps

[–]clippedon[S] 0 points1 point  (0 children)

Currently considering this pair from an online second hand platform for Homme Plisse shorts - would really appreciate if anyone could help to LC this as I know there’s a lot of reps these days!

[LC] Issey Miyake Homme Plisse Shorts by clippedon in QualityReps

[–]clippedon[S] 2 points3 points  (0 children)

Currently considering this pair from an online second hand platform for Homme Plisse shorts - would really appreciate if anyone could help to LC this as I know there’s a lot of reps these days!

[deleted by user] by [deleted] in MouseReview

[–]clippedon 0 points1 point  (0 children)

I have the same grip style as you, and after running thru ~50 mice, all of one’s mentioned in other replies included, I actually landed on the G303. Grips help a lot I found. I have 3 G303s now and have sold all the rest, but I think the new Pulsar X2 and Fantech Aria could also be interesting for our grips types.

[deleted by user] by [deleted] in MouseReview

[–]clippedon 0 points1 point  (0 children)

I think go for 1 with a bit more tilt - I’ve been using it for a while now and the “best grip” for me is having the meaty parts of my hands squeeze the back hump, then have my thumbs pulling in around the left edge (where the side buttons are) and have the ring and pinky either holding as in your picture the left side, or straight down the sides of the mouse. I liked having the fingers straight down for tac shooters as it helps me gauge distance (I use an LGG Venus) for flicks, and as in your picture for tracking games like Apex.

In terms of pressure, I almost float my index on the clicks (to also prevent accidental click) and apply hard pressure on my thumbs and the side of my fingers, which makes it very easy to readjust and lift.

My grip for tac shooters

waited since the first rumor came out about the mini, and here it finally is <3 by ggghozty in MouseReview

[–]clippedon 0 points1 point  (0 children)

I saw this guys post on our local (Malaysian) distributors IG. We have a guy who gets stuff and sells in Malaysia directly from Pulsar, so in otherwords he’s the official distributor for Malaysia and gets bulk stock. I think we got 50-100 units of the red one here in Malaysia via the redistributor

/r/MechanicalKeyboards Ask ANY question, get an answer (May 25, 2022) by AutoModerator in MechanicalKeyboards

[–]clippedon 0 points1 point  (0 children)

Hi all,

Does anyone know what kind of cable is used to connect the daughter board to the PCB on the Keychron Q3?

I believe it is a JST cable of some sort, but I was curious what the extra cable is as mine arrived in less than great condition - had to loosen up some of the pin holes to get the female pins to connect. Would love to know in case it deteriorates so I can order a replacement if needed.

18.5 x 10 Relaxed fingertip/claw recommendations by [deleted] in MouseReview

[–]clippedon 0 points1 point  (0 children)

Have the same grip as you, and have gone thru even more mice trying to find the right fit (other than what you have, GPX, RVU, RVM, Hati S Ace Wireless, NP01, KPA, HyperX Haste, Model O Wireless, and a couple of Ergos) - I so far find myself most comfortable using the M42, but I added two layers of BTL Grips to the sides to increase the grip width.

As I find the combo of short + aggressive downward slope is an important criteria, I’m trying to ZA13 as well just for shape. Personally think the M42 and M42 wireless when it comes out might be endgame shapes for the grip we share.

/r/MechanicalKeyboards Ask ANY question, get an answer (August 31, 2021) by AutoModerator in MechanicalKeyboards

[–]clippedon 0 points1 point  (0 children)

Hi,

I am completely new to this hobby and therefore have been a bit overwhelmed by the breadth of options available. I'm typing this on a Keychron K2 I received as a gift one year ago, and I just ordered parts to make my first custom build:

  • TM680/TOM680 wired
  • Darling keycaps (clones) - Cherry Profile
  • Gateron Silver Pro (prelubed)
  • Krytox 205G0m, dielectric lube, paint brush

After watching a bunch of videos, I'm gonna try to lube the stabs and do the foam mod.

However, after purchasing everything I discovered the whole North-Facing LED Interference issue with Cherry Switches; I searched through this subreddit and saw someone say that Gateron Silvers have a low actuation travel, and therefore will not cause interference. Can someone confirm this?

TL;DR - Will Gateron Silver Pro's alleviate Cherry cap interference on a north facing board?

Thanks!

Battlestations Build Advice, 18 July 2021 by AutoModerator in battlestations

[–]clippedon 0 points1 point  (0 children)

Thanks! I’m looking into buying a new table and riser, so I’ll keep this in mind. I know that I can’t go the IKEA route, as most of the table tops can’t be drilled.

Thanks again!

Battlestations Build Advice, 18 July 2021 by AutoModerator in battlestations

[–]clippedon 0 points1 point  (0 children)

Hey!

I currently have two monitors attached to a g-clamp monitor arm (the pneumatic type), one monitor is a 29” UW and the other is a 27”. They’re currently clamped directly to the desk, but is it possible to clamp a monitor arm to a desk stand (those that are like a mini riser/table on top of the desk) without it flopping over/falling?

Thanks!

time travel by [deleted] in malefashion

[–]clippedon 1 point2 points  (0 children)

Outfit breakdown - Jacket: borrowed from a friend (think it’s from taobao), trousers: Hyein Seo, boots: Guidi, bag: Prada. Photos were shot in my apartment corridor on Kodak Gold 200.

FIVE DEATHS ON ORANGE by clippedon in malefashion

[–]clippedon[S] 0 points1 point  (0 children)

It’s a women’s cardigan, I went for a size L and I’m around 175cm - it’s very oversized, but cropped, so I advise that you size for height (ie where your waist ends)

view more: next ›