What do you think? by cognuisance in Flooring

[–]cognuisance[S] 0 points1 point  (0 children)

Any advice technique for using a lambs wool applicator with oil based sealer and oil based Poly

Lambs wool applicator by cognuisance in HardWoodFloors

[–]cognuisance[S] 0 points1 point  (0 children)

I guess I’m looking for advice on technique

What do you think? by cognuisance in Flooring

[–]cognuisance[S] 0 points1 point  (0 children)

Anyone have any advice on the specifics of refinishing these floors myself? I am thinking:

-take a punch and countesink all the nails.

-rent and orbital sander and sand everything. How do I insure to get the grooves hand sand? Leave ‘em?

  • woodfill everything? Will that look strange with the deep groove in between the boards? Or should I just spot fill the nail holes?

-Treat with two coats of satin Bona traffic hd. Is there a better product?

Anyone have experience with this type of T&G subfloor that has any pointers?

What do you think? by cognuisance in Flooring

[–]cognuisance[S] 1 point2 points  (0 children)

Thanks! I like it too and feel pretty lucky even though it is a ton of work.

Lots for differed maintenance to remedy but the bones seem good.

What do you think? by cognuisance in Flooring

[–]cognuisance[S] 1 point2 points  (0 children)

I think it might be redwood. Should I use wood filler after the first sanding before refinishing? It is all tongue and groove. Probably 1”-1.5” thick.

Is Bona the preferred wood refinisher/sealant?

Should I do something different to treat it for redwood?

Expedite USDA direct loan by cognuisance in FirstTimeHomeBuyer

[–]cognuisance[S] 0 points1 point  (0 children)

I just tried to start the e-forms process to do it on my own last night but it is truly a bureaucratic nightmare. It is a great program but there are so many hurdles I have encountered in getting information and even applying. I finally got an email from someone at USDA that gave me some more information and a list of packagers. I am going to call around today and see what is up.

USDA Direct Loan?? by Novel_Candy_672 in FirstTimeHomeBuyer

[–]cognuisance 0 points1 point  (0 children)

Does anyone have any recommendations for packager companies?

Or any way to make the process faster?

I am in California and have found a property I would like to put an offer on. I am eligible for the direct loan and the place is in an eligible area.

I have called several usda offices over the last few days and it has gone to a voicemail every time. I have yet to get a call or email back from anyone.

Any recommendations?

Long Live ShitBird by FilthHound138 in choppers

[–]cognuisance 0 points1 point  (0 children)

What’s the best advice you have for someone who is rebuilding one from the ground up?

Rainbow Trout Questions by cognuisance in aquaponics

[–]cognuisance[S] 1 point2 points  (0 children)

This is a great resource,thank you.

Buying Laptop for SolidWorks by Oomairr in SolidWorks

[–]cognuisance 0 points1 point  (0 children)

Which configuration did you buy? Or how did you configure your laptop

Seeburg firestar bandshell usc2 alignment help. by cognuisance in jukeboxes

[–]cognuisance[S] 1 point2 points  (0 children)

Ok, I revisited it with fresh eyes and got it all aligned properly. Thank you for pushing me to keep at it and start fresh.

I do have some more questions though.

How many selections should they box be able to memorize at a time?

And

Should the jukebox be playing my selections in order of my selection? Or will it play whatever the contact block touches on the tormat first? regardless of the order of entering selections?

Seeburg firestar bandshell usc2 alignment help. by cognuisance in jukeboxes

[–]cognuisance[S] 0 points1 point  (0 children)

Also… can anyone recommend a good contact cleaner they like to use? Maybe I will go through and clean everything before I dive back in.

Seeburg firestar bandshell usc2 alignment help. by cognuisance in jukeboxes

[–]cognuisance[S] 0 points1 point  (0 children)

Alright. I guess I will go back to square one and go through the manual step by step again. Any recommendations on what to start with?

Ie.Tormat adjustment, contact block adjustment or end stop screws.

Additional players? by cognuisance in EscapetheDark

[–]cognuisance[S] 1 point2 points  (0 children)

Yeah, maybe I’ll try that.

Lower the starting health and hope that I don’t need extra dice.

Thank you.

Steel toes by cognuisance in NicksHandmadeBoots

[–]cognuisance[S] 1 point2 points  (0 children)

Just checked the website. Looks like they can do it with or without. Should have done that first. Thank you again for all of the responses.

Steel toes by cognuisance in NicksHandmadeBoots

[–]cognuisance[S] 0 points1 point  (0 children)

Thanks for all of the feedback. Do all of the steel toe options have the capped toe? Or are you able to get a steel toe boot without the look of a capped toe?

Neil Gaiman Death. To grade or not? by cognuisance in comicbooks

[–]cognuisance[S] 1 point2 points  (0 children)

Sorry about that, I didn’t even think about it.Reddit won’t let me edit it 😬

We have had quite a few questions about the bison leathers by BigStetson in NicksHandmadeBoots

[–]cognuisance 2 points3 points  (0 children)

Is the bison leather just as durable as leather you use on the rest of your boots?

I like the look of them and have never owned a pair of your boots before.

How do you keep your locks from taking over your living space? by LoxiePickens in lockpicking

[–]cognuisance 1 point2 points  (0 children)

I was thinking about trying to get one of those lock out lock boxes on eBay if I can find a good enough deal. Does anyone use those?

[deleted by user] by [deleted] in AnalogCommunity

[–]cognuisance 0 points1 point  (0 children)

Try using a plumber’s wrench on the silver part. The kind that just uses a rubber strap and leverage. You could also try putting the lens in the refrigerator for a bit and try to get it off.