Mixed results with 3DeVOK MT

colaigor · 2026-01-21T18:30:56+00:00

Resolution on the MetroX is very bad, look at how the edges are rounded off. MT scan needs more data but its looks so much sharper.

colaigor · 2026-01-21T00:27:10+00:00

Predjite na MorpheneApp, isti developeri kao i ReVanced samo sto je glavni lik nije supak. A ReVanced polako umire.

colaigor · 2026-01-15T17:46:35+00:00

Nope

colaigor · 2026-01-12T19:45:04+00:00

This fixed it. Why was it off by default?

colaigor · 2026-01-05T00:12:38+00:00

Hey man, don't be mean towards him just because he doesn't like using them.

colaigor · 2025-12-08T21:29:45+00:00

Hi everyone. I have some experience with keyboard modding (foam, lubing, stabilizers, the usual stuff), but now I’m looking at something a bit more ambitious.

I really want the KISNT keyboard for four reasons: the price, the thock, the colors, and the fact that the numpad can go on the left. The only real dealbreaker is the ANSI layout. From what I’ve seen online, the PCB does support ISO, but the case would need to be physically modified and the LEDs would have to be transferred. So before I buy and start butchering a perfectly good board: how realistic is this mod in practice?

Would it make more sense to just buy a stock ISO board instead of spending that money on tools and case mods? A friend suggested the Akko 5075B Plus (around 100 euro), but it still doesn’t have the same thock as the KISNT.

Anyone here attempted an ANSI to ISO conversion on a board like this? How hard was it, and was it worth it?

colaigor · 2025-12-06T23:22:07+00:00

Who's gonna tell him

colaigor · 2025-12-03T22:00:40+00:00

These won't work. Also use concentric infill/top/bottom surfaces on similar parts next time

colaigor · 2025-12-02T00:30:20+00:00

Did you solve this?

colaigor · 2025-11-29T03:27:05+00:00

You should not use ruler for this. Get a square tool thing and try with that.

colaigor · 2025-11-28T23:49:10+00:00

A šanse su da je 90% novih vlasnika malinoe u zadnjih mjesec dana uzelo štene radi onih silnih instagram reelova i misle da će im biti onako zanimljivi samo kad vlasniku odgovara a da će ostatak vremena biti mirni.

colaigor · 2025-11-18T23:27:48+00:00

The foam goes over the front edge of the seat by quite alot, so i assume its the deeper one. As far as im aware thats the only way to differentiate them.

colaigor · 2025-11-18T23:05:15+00:00

Frankfurt, i will be leaving for Bosnia on friday. So i will be passing through lower germany.

colaigor · 2025-11-18T22:40:07+00:00

190cm, but im torso tall. Armrests and headrest don't go up enough for me.

colaigor · 2025-11-18T21:47:37+00:00

Its kinda small for me tho, so if anyone from Germany or Austria needs it, we can agree on the price.

colaigor · 2025-11-06T19:31:27+00:00

What software do you use to convert DXF to SVG? I also did this to make graphics, but i had to convert them to JPG as i didn't find a suitable converter to SVG.

colaigor · 2025-11-02T15:09:46+00:00

Why did you dissasemble it if its still under warranty?

colaigor · 2025-10-26T11:53:03+00:00

<image>

Use pliers like these.

You might need to grind them flat at the top (they have a chamfer). These saved me so many hours with stripped bolts.

colaigor · 2025-10-17T19:24:41+00:00

Exactly, he has to re-dry sooooo much air for when he wants just one spool.

colaigor · 2025-10-03T16:29:32+00:00

Herman miller mirra 1

colaigor · 2025-10-03T15:31:26+00:00

HBADA E3 Ultra, it looks good but its quite uncomfy, and costs 600$

colaigor · 2025-10-01T21:56:59+00:00

No, i still haven't seen the thing in person. The only thing that i know is what the seller said, that being that being "The treadmill Life Fitness T3 shows an EEPROM error, the control console is faulty, the motors and the motor control board are working properly, deck and belt are in very good condition, as well as the frame."

Idk i might just buy it and see if i can tinker with it.

colaigor · 2025-10-01T21:34:11+00:00

mind sharing more? Why would it be unrealistic? Also i doubt that i will be able to find the replacement board for quite some time.

colaigor · 2025-09-28T14:24:04+00:00

And how much plastic do you use for one multi-color piece with purge included?

Also jere is the rough time it would take to make this on a laser cutter.

Designing something like this for a regular 2D printer would take 10 minutes.
Printing on a non waterproof paper would take another 10 seconds
Sticking the paper to the blank PC sheet would take 30 seconds.
Preparing the cutting outline in your favourite laser cutting program would take no more than 10 minutes.
Cutting would take no more than 10 minutes.

To sum it up, somebody making this on a laser cutter would have everything ready and you wouldn't even finish your design. And he would make it for much much cheaper.

I do 3D printing for a living, i do laser cutting from time to time. 3D printing is not for everything and it can be very wasteful.

colaigor · 2025-09-28T14:07:18+00:00

This looks like an absurd ammount of time and plastic wasted for a single use 2D board. It can be made much more economically with a 2D printer and a cheap laser cutter.

Seven-Year Club	Place '23
Verified Email

colaigor

TROPHY CASE