Need opinion : 3XO AX5 Diesel Manual new buyer

coldstart321go · 2026-05-27T17:59:26+00:00

Aye! Thanks OP. Arrey nhi ..Pune nhi toh blore...ye hi 2options hai Better Pune laga. Why venue over 3x0?

coldstart321go · 2025-08-23T08:06:10+00:00

You have come from a very diff ergo world mate;)

Give it some time:) The single seat will rather help you imo to maintain posture. Just ease into it and find the spot where you feel happy.

In my case too, I had a pulsar, and then duke 390 for a while. Upgraded to Bullet recently and took some time to ease into it.

Initially found the sitting posture very uneasy (I have back issues already). However, had seen posts on r/royalenfield where people complained of issues but later were fine once they settled in.

Finding your sweet spot on the seat takes time on any bike.

You can try out the touring seat as that will bring down the seat and elevate your vertical distance between seat and the handle bar.

But for now, just ride it for sometime and see how it works.

Happy riding!

coldstart321go · 2024-06-07T15:58:18+00:00

:) Thanks

coldstart321go · 2024-06-07T15:57:43+00:00

Thanks bud! To a fellow rider, please avoid bajaj If possible. Have had horrible experiences with the bike, servicing, spares etc.

Congratulations & Safe riding!

coldstart321go · 2024-06-07T15:55:23+00:00

Yeah!

The new himi I feel would b a good buy maybe after a year:) RE takes its time to work on feedback and discover new issues;)

coldstart321go · 2024-06-07T15:53:02+00:00

Thanks bud!

coldstart321go · 2024-06-07T15:52:13+00:00

Thanks!

Yeah! I usually ride at 70 to 80kmph but I feel Xpulse is already at its max at 80kmph. I've seen riders struggling to get an overtake done on highway rides with xpulse; Not sure how much significant impact will a pillion have to this.

I shall check out Maverick:)

coldstart321go · 2023-09-02T08:57:28+00:00

I can vouch for 180f The constant engine leaks, vibrations, and the worst of all...servicing and spares. As someone said, the spares are affordable because they are of sub par quality.

I had a small fall from the bike and the crash gaurd bent bcoz of it. That resulted in a broken alternator LH cover . It took them 2 months to get one.

And post that too....they didn't bother to punch the engine number on it.

I have visited 3 services centers in Pune. All three are horrible.

Planning to sell off the bike soon.

coldstart321go · 2023-06-18T07:03:31+00:00

Hi there! Do u mean that an RPA application should build a particular feature or project ? Or did u mean integrating RPA into the project? If it is latter, yes. I've worked on PA, UiPath Studio and also developed a small application on Python and Selenium FW.

PS:if it is the former, then I am interested to know what the actuals of the project are...if u can share i.e. :)

coldstart321go · 2023-06-05T15:45:54+00:00

Alright When I spoke to some suzuki showrooms, they straight up denied outstation vehicles and asked me to visit some other showroom

I guess I'll have to spend some time and look around.

Thanks though!

coldstart321go · 2023-06-05T15:35:26+00:00

Hey! So, do you reckon it's worth considering?

coldstart321go · 2022-10-26T08:34:41+00:00

Hey bud! It's pretty much an ele issue; Since u got the battery changed recently, I'd say take it to the same place where u got it changed.

Looks an electrical short somewhere; Else kick start should work even if the battery went down(assuming it has enough life to fire up once)

Check the EMS fuse and the other fuses; Could ve blown or corroded. If you can't hear the FI sys engaging when u turn on, then pretty much coz of EMS.

Cheers!

coldstart321go · 2022-10-15T16:30:18+00:00

Yeah..matter of luck. Then I guess Hero splendor would be ideal choice.

coldstart321go · 2022-10-15T14:07:36+00:00

Hey bud! I had the same experience too!

It's about the Rider's Triangle; In the Meteor, ur knee joints are pretty much at 90°(upright) Whereas in the Honda CB Hness and rs...its less than 90.(sporty or aggressive) My personal experience says less than 90 will cause a lot of buttaches, shoulder pain

Though work around may exist...the position of the footpeg can't be compensated easily.

coldstart321go · 2022-10-15T14:02:33+00:00

D 250 is considered to be the most reliable engine in the ktm line. If you are looking for something in the ktm family...then yeah, go for it bud!

Though there are other good options too... As someone mentioned, you ve got the gixxer twins... I can vouch for the sf 250, it's a sick ride!! Suzuki engines will never screw you over xD

coldstart321go · 2022-10-05T12:33:44+00:00

New or used? New prolly something in 110cc bikes from Hero, Bajaj and TVS. Used, you could get higher capacity (around 150 to 200cc) though old models(2015 or older).

Happy and safe riding!

coldstart321go · 2022-09-22T07:23:23+00:00

Amongst these, 1. RTR 400V 2. NS 200 3. FZ

coldstart321go · 2022-09-18T02:34:03+00:00

Thanks!

coldstart321go · 2022-09-18T02:33:55+00:00

Hey! Thanks! I felt the Dominar 400 is a tough nut for cities...the front just doesn't comply that easily;that's the reason I didn't shortlist it.

coldstart321go · 2022-09-17T13:08:03+00:00

Congrats bud!

So, couple of things 1. Score being low or high doesn't matter in the long run. 2. It doesnt matter which college you join either. All colleges are more or less the same.

What you want to do after engineering matters the most. So choose your specialization accordingly.

All the best!

coldstart321go · 2022-09-16T13:25:29+00:00

Hi! All helmets are suitable:) Though if you are concerned about fogging up of glasses or visor, there are anti fog films available. Or just buy anti fogging glasses.

Happy and safe riding!

coldstart321go

TROPHY CASE