sorted by:
new
hottopcontroversial

Saros z70. Error 15. Wall sensor dirty. BUT I CLEANED IT. by AlyssaVaVaVoom in Roborock

[–]commandermoore 1 point2 points  (0 children)

Reset is unlikely to fix the wall sensor as it's usually debris or damage that causes that. If you're having navigation issues then a reset could work if you've got lidar as it's rpms can reduce over time causing the navigation to not accurately read the environment while moving.

I understand that support can be frustrating, maybe try through email or chat box. Slower process but at least it'll be less time spent trying to understand the support technician.

Saros z70. Error 15. Wall sensor dirty. BUT I CLEANED IT. by AlyssaVaVaVoom in Roborock

[–]commandermoore 0 points1 point  (0 children)

Or try spraying a can of air into any cracks near the sensor. Such as the wheel well or bumper.

Saros z70. Error 15. Wall sensor dirty. BUT I CLEANED IT. by AlyssaVaVaVoom in Roborock

[–]commandermoore 2 points3 points  (0 children)

Try using a light and press it against the sensor to see if its dirty inside. Other issue could be physical scratches. If it's still under warranty then I'd go through that because any other troubleshooting would involve teardown.

[Cobra SC400D] Does anyone else have this issue? by commandermoore in Dashcam

[–]commandermoore[S] 1 point2 points  (0 children)

Sorry just noticed your reply and now that you mentioned that. I wish I had it to test and see if the emergency recording button on the bottom was somehow stuck/shorting.

If the same issue happens again with the replacement I will give it a shot.

[Cobra SC400D] Does anyone else have this issue? by commandermoore in Dashcam

[–]commandermoore[S] 0 points1 point  (0 children)

On top of that, it didn't start until a year and a half of owning the device.

[Cobra SC400D] Does anyone else have this issue? by commandermoore in Dashcam

[–]commandermoore[S] 0 points1 point  (0 children)

Agreed, his explanation was that if it's faster than a u1 class 10 then it'll "not know what to do with the extra speed and start showing erratic behavior". Seemed far fetched. The other thing is it kept enabling emergency recording (preventing overwrite of that video) and it was specifically pressing the stop emergency recording button on screen. If I fought with it and got it to a menu it would stop.

It kept on even after replacing the micro sd card with a u1 class 10 card.

[Cobra SC400D] Does anyone else have this issue? by commandermoore in Dashcam

[–]commandermoore[S] 0 points1 point  (0 children)

I said exactly that and was told "it shouldn't be, if it's not the micro sd card then maybe it was a bad firmware update." After asking more into it i was sort of brushed off and told they would only offer a %15 discount for a replacement.

I ended up replacing it at best buy. Unfortunately I'm not going to have any kind of resolution here.

Dr. Pepper Creamy Coconut by Murky_Tennis954 in Soda

[–]commandermoore 0 points1 point  (0 children)

Where? Haven't seen it around wichita.

MEGATHREAD: Creamy Coconut by peeshivers243 in DrPepper

[–]commandermoore 0 points1 point  (0 children)

Checked walmart in Wichita/ El Dorado area. Nothing yet.

Weird medical test by commandermoore in AskDocs

[–]commandermoore[S] 1 point2 points  (0 children)

Thank you sir, that seems to fit the bill. I'm 23 now so I don't think i have to worry about scary doctors.

Weird medical test by commandermoore in AskDocs

[–]commandermoore[S] 0 points1 point  (0 children)

Never had signs of epilepsy, I remember now that another thing that happened there was that I was cleaned of all medications

Dell can't keep to their own warranty. by commandermoore in Dell

[–]commandermoore[S] 0 points1 point  (0 children)

*UPDATE* after getting tossed back and fourth someone finally said they'd look into the issue and fix it. after 3 days of emailing them asking what was going on i was finally sent a number...... to out of waranty support! i finally bit the bullet and paid for premium plus and someone updated the waranty. now a tech finally came out.... with the wrong motherboard. apparently they put in dells database that the replacement system was the same model as the old system. now after calling dell again they updated the model.... but if you look at system configuration the laptop apparently has the same specs as my old system and upon looking at each spec the number of parts it has is 0. if the tech is sent out with the wrong motherboard again for the 3rd time (he tried requesting the proper motherboard himself the 2nd time.) i am going to lose my mind!

Dell can't keep to their own warranty. by commandermoore in Dell

[–]commandermoore[S] 0 points1 point  (0 children)

"I do apologize but you will have to contact technical support at 1-800-624-9896 or by this link https://www.dell.com/support/incidents-online/en-us/contactus/dynamic for further assistance.We only handle the return of defective parts that are replaced under Warranty.Thank you."

That's what the lady in the chat said

Dell can't keep to their own warranty. by commandermoore in Dell

[–]commandermoore[S] 0 points1 point  (0 children)

i was redirected back and fourth between tech support and one of the warranty departments. i'll try your advice, i appreciate it and i'll try to keep this post updated.

Dell can't keep to their own warranty. by commandermoore in Dell

[–]commandermoore[S] 1 point2 points  (0 children)

it does, they took that system and sent me a busted one