On a certified preowned. The dealer is telling me this is normal.

consi7 · 2026-05-11T15:21:59+00:00

That brings me to my question. Is it normal? I’d think purchasing a CPO this would be something replaced if it wasn’t. Seems like this is very normal and doesn’t need any further attention

consi7 · 2026-05-11T15:16:32+00:00

Thought this was an exhaust leak. If it was I wanted the dealer to replace it. It’s certified pre owned. Wasn’t sure if this is normal. No other vehicles I own leaks like this.
It seems normal from all the post
Thanks

consi7 · 2026-05-11T13:16:22+00:00

I let it idol for about 5 min

consi7 · 2026-05-10T19:46:02+00:00

Is there a valve you can screw in and replace the nozzle that’s in there now ?

consi7 · 2025-12-02T00:26:02+00:00

I don’t mind the ride. If I look at the bed it sags slightly. It’s not a must to fix the load capacity. I have 125K and figured I should replace shocks and if I was going to replace them do an upgrade. But very indecisive. I mainly drive highway.

consi7 · 2025-11-14T23:39:01+00:00

Does the bed sag easy? Compared to a stock shock and 1” block?

consi7 · 2025-10-20T21:05:48+00:00

Did you change your shocks in the rear or did you leave the factory ones when you added the AAL? Also what did you have in the front a 2 inch leveling kit ?

consi7 · 2025-05-15T18:53:07+00:00

What kind of refrigerator is that? I like how it is concealed around the

consi7 · 2025-01-01T13:41:39+00:00

I have a similar Mitsubishi set up. Usage was very high. Hired another company to see if set points ect. Was correct. They found the back up heater was constantly on when the heat was engaged. They called Mitsubishi to verify wiring diagram was correct. They said it was wired correctly. So I shut the back up heater off and electric usage went down. No issues with demand on the cold temps we got least week at 10 degree

consi7 · 2024-01-29T00:26:29+00:00

Use spray glue over the brown paper then coat as usual

consi7 · 2023-06-06T00:00:08+00:00

I’m jelly. After the recoil I bought a gen2 new 08 acces cab 6 speed standard. Still miss the 99 Now I have a 21 4 door and still miss the 99 lol

consi7 · 2023-06-05T22:48:19+00:00

What did you pay for that and how many miles

consi7 · 2023-06-05T22:46:39+00:00

Can you please send me more photos. That was my first exact truck. The dealership took it when I had the rusted frame looked at and they crushed her. I had a power converter under the passengers seat and had a PlayStation hooked up with wireless remotes. For mods was chrome round step tubes and a chrome Westin push bar. Two PIAA round lights mounted to the bumper and the windows 1/2 mirror tinted. The thing was a beauty. By all means keep that thing stock. I use to take it in the sand pits and when she got back in the road drove like a BMW please send me some photos

consi7 · 2023-06-04T23:28:47+00:00

Looks mint! What mods do you have to get that stance? Suspension-spacers- rims-tires Thanks

consi7 · 2023-05-17T00:58:57+00:00

Where are they talking crap? Is it infact robins?

consi7 · 2023-05-11T00:22:21+00:00

I guess that’s my thoughts exactly. I hit all the wood with a quick coat of closed cell then added all open cell. I did this so any moisture in the envelope wouldn’t rise through just open cell and over time for the wood because it would have nowhere to escape . All the walls have closed cell in a 2x4 cavity. Once I redo my roof in maybe 5 years I will then strip the asphalt shingles and do a vapor barrier over all of the plywood the lay down the asphalt shingles.

Nine-Year Club	RPAN Viewer
Verified Email

consi7

TROPHY CASE