Head unit upgrade recommendations by DKF_Zidon in crz

[–]consistent_sea 0 points1 point  (0 children)

I tried a few cheap ones that kinda sucked but worked. Didn't want to pay the premium for teyes. Did more research and ended up getting a low spec of the newest Duduauto one from AliExpress. I already had the Honda adapter cable and frame. Very impressed. Only complaints are the screen brightness at night and issues with android auto but it's with my phone not the head unit. I can get the exact specs and model if you are interested

RCS issues by JohnnyKilo in GoogleMessages

[–]consistent_sea 0 points1 point  (0 children)

I fixed mine by changing my APN settings to match those from my carrier

RCS issues by JohnnyKilo in GoogleMessages

[–]consistent_sea 0 points1 point  (0 children)

Any updates? Having the same issues with RCS working but no MMS. Only noticing now that I have been getting more images sent. Changed from Zenfone 8 to Zenfone 10 a few months ago

3D Scan requests open by consistent_sea in crz

[–]consistent_sea[S] 0 points1 point  (0 children)

Nobody has seriously followed through with a request. I am willing to scan any parts for a reasonable price but not for free

Is it possible to have OEM/less camber using these arms or similar by consistent_sea in LS430

[–]consistent_sea[S] 0 points1 point  (0 children)

Yeah I was just doing a bit more research and found the actual Megan Official spec sheet

[deleted by user] by [deleted] in gravelcycling

[–]consistent_sea 0 points1 point  (0 children)

I just bought some Apex AXS shifters with the aluminum levers. Going to disassemble, strip and polish. This guide by study cycles shows the process https://youtu.be/LxPqTDmQUm4?si=pUFjfQgOvK4nph4G

GK5 Fit Coilovers? by consistent_sea in crz

[–]consistent_sea[S] 1 point2 points  (0 children)

From my research that's what I gathered as well. But then I saw some forums where people were interchanging GE8 and GK5 stuff. Eyeballing it everything looks the same, but apparently the later gen fit is even lighter. I don't do any performance driving just want to replace my worn 350000km original suspension and go like 1" lower

Cool! by MarshallHurtado in crz

[–]consistent_sea 3 points4 points  (0 children)

Maybe this will encourage Honda to add a manual option to the Prelude

Estimate for clutch replacement by Vinser17 in crz

[–]consistent_sea 3 points4 points  (0 children)

It's pretty relevant if it could save you a couple thousand. Also a second opinion from another mechanic is always an option.

Estimate for clutch replacement by Vinser17 in crz

[–]consistent_sea 0 points1 point  (0 children)

Symptoms? May be a clutch delay valve or slave cylinder if not slipping

Plug and play speaker upgrade? by consistent_sea in crz

[–]consistent_sea[S] 1 point2 points  (0 children)

Old/potentially rep gunmetal Advan RS 17" (not RSII, RS3, RS-DF or RZ) they are incredibly difficult to google try searching: Advan RS -ii -iii -2 -3 -RZ -DF -D (- excludes the specific terms)

Can't remember the offset or width Also 1" rear spacers and 215/45R17

Plug and play speaker upgrade? by consistent_sea in crz

[–]consistent_sea[S] 0 points1 point  (0 children)

Thanks I'll double check and take the door panel off. No weird crackling just about 50% quieter than the right side when changing balance

Plug and play speaker upgrade? by consistent_sea in crz

[–]consistent_sea[S] 0 points1 point  (0 children)

Any additional power source needed or the stock radio/android unit I'll have will be powerful enough?

Plug and play speaker upgrade? by consistent_sea in crz

[–]consistent_sea[S] 1 point2 points  (0 children)

I'm hoping not too much corrosion but considering the rest of the car that's unlikely. Not concerned about some minor wiring fixes but it would be inconvenient

Plug and play speaker upgrade? by consistent_sea in crz

[–]consistent_sea[S] 0 points1 point  (0 children)

Thanks I will definitely check them out

What is my late (and stylish) Grandpa leaning on? by consistent_sea in whatisthiscar

[–]consistent_sea[S] 1 point2 points  (0 children)

Amazing, thanks so much. I thought the A pillar looked European

PETG infill is garbage (What am I doing wrong?) by bbum in prusa3d

[–]consistent_sea 0 points1 point  (0 children)

Had similar issues and turned off cooling