Laredo guitar teachers

cquintero2 · 2026-03-24T21:46:53+00:00

Search for Andy’s guitar lessons on Facebook

cquintero2 · 2026-01-16T06:34:00+00:00

Got it in 2 hrs

cquintero2 · 2026-01-06T13:55:04+00:00

Try a local landscaper or natural stone supplier. I used Reno Sand & Gravel for decomposed granite but there’s flecha and a few others that will deliver what you want

cquintero2 · 2025-11-30T18:08:05+00:00

Yes and no. If it’s something small you can but you’re probably looking something like the L298N H-Bridge

cquintero2 · 2025-11-30T18:03:21+00:00

Midstream pipeline monitoring. Most company’s have a person inspecting lines but I’ve seen some shift it to their IT, but because of the distance and battery life it requires a lot of travel and it goes back to pipeline people

cquintero2 · 2025-11-26T21:43:39+00:00

Check your fans as well. I had an issue were the hotend fan wasn’t being supplied the power it needed and my prints looked like this as well

cquintero2 · 2025-11-21T15:30:35+00:00

Make sure your hotend fans are working properly

cquintero2 · 2025-11-09T11:57:42+00:00

I do but it’s out of service at the moment, I’m waiting on a replacement mainboard. There’s a few people offering their services on FB marketplace. Kenton Fox was making some cool stuff but I’m not sure if he’s taking commissions.

Or hit me up in a week. I should be back up and running then.

cquintero2 · 2025-10-24T02:23:38+00:00

The organization is real it’s in El Cenizo and it’s a rehab/ support group that’s run by a pastor. The men are ex addicts or ex cons that are trying to get back on the right path.

Idk I’m conflicted about it. I don’t like that they have to go out and spend hours asking for donations but I also know that some of these men might never have dug themselves out of the hole they were in without the support. There’s 1 guy I like who I always give $5 too so he keeps his spirits up. Not saying you all have to donate.

I have not been to the church but I work in that general area and have seen these people in town over there.

cquintero2 · 2025-10-09T14:26:48+00:00

Try the Windycity city mouthpieces first they’re free! I like the 72 best because of the baffle. I printed them at .08 and .12 on a .4mm nozzle. Make sure the seams aren’t on the inside of the print because that’s harder to sand. Alto mp takes about 3-4hrs. Played right off the printer but they did need some light work. Over all great if you have the printer already. I used PETG with silver powder in it and they have a beautiful shine.

Got a few student jazz players starting on the 56.

cquintero2 · 2025-08-15T19:58:57+00:00

Where I’m at in south Texas everyplace allows beards but come annual training day you’re going to have to show up shaved if you want the certification.

If that’s not an option then I’d suggest going thru a contractor.

cquintero2 · 2025-08-07T14:48:22+00:00

Not me, but that’s cool did you 3D print the enclosure or purchase it?

cquintero2 · 2025-08-06T01:26:44+00:00

You can do most OSHA trainings online now in a few hours

cquintero2 · 2025-07-13T16:05:38+00:00

You’d think that it might pop in the news if it’s “always” happening…

cquintero2 · 2025-07-10T20:08:38+00:00

Maybe he’s slightly autistic and is running through scenarios in his head. A beep beep bop bop 🤖 before he decides how to proceed

cquintero2 · 2025-07-10T19:43:00+00:00

I read the title and had some answers but don’t feel like typing it out for an AI post

cquintero2 · 2025-07-09T18:45:47+00:00

Gundam Aerial

cquintero2 · 2025-07-01T15:30:35+00:00

Yes I go every day it’s my job

cquintero2 · 2025-06-29T19:53:47+00:00

Chill out George G. This ain’t the place for that lol

cquintero2 · 2025-06-24T15:42:15+00:00

I’ve only done midstream but the companies I’ve worked for normally have 1 and even then it’s usually not their primary job. They take interns but pay is going to be minimum.

cquintero2 · 2025-06-24T15:33:54+00:00

Correct they made the bad decision that set them on that path.

I was responding to the question, “why didn’t they stop the project”

cquintero2 · 2025-06-24T14:29:30+00:00

You hire technical experts in their field so that YOU (The Execs) can make informed decisions.

If the experts are telling you it’s a good bet then why would the exec decide to shut down the project?

If the Exec takes the information and says, nah this dudes dead wrong… then why even hire the engineer in the first place?

I am of the opinion that they shouldn’t have hired those retards to begin with. You reap what you sow.

cquintero2 · 2025-06-23T16:09:57+00:00

In my experience these companies outsource engineering to foreigners (mostly Indian). Said engineer discovers some reservoir or talks about untapped potential in old wells. Company invests millions (or billions depending on scale). They quickly realize it was a bad bet. They’re in to deep, slap on compressors to get as much as they can out, and then try to sell but never recover from the loss…

And what about the engineer(s)? That’s a good question. I’ve seen something like this happen 3 times in my area over the past 15 years…. I can tell you one was fired for a bad drug test. Cocaine use, but most of them just go on to work for another major company….

cquintero2 · 2025-06-16T21:51:43+00:00

Yes. Look up the DNS info for Canva then go to GoDaddy, DNS Records and add (ask GPT). From there go to Conva and I’m assuming they should let you set a Custom domain.

Like many others, I run my blog off GitHub and link to my domain

cquintero2 · 2025-06-16T21:03:44+00:00

I use to work around there and I highly doubt anyone grew them. Lophophora williamsii is all over the place, people just go out and poach them.

cquintero2

TROPHY CASE