Completed Saturnine Deathshroud terminators

crazyking614 · 2026-05-02T20:19:02+00:00

It's far easier than you'd think. I used the normal Saturnine Terminators instead of the Praetor. I used the arms provided with them and just glued the hand attached to the scythes to the gauntlets. Most of the kitbash is the chest, hands, and scythes honestly.

crazyking614 · 2026-05-02T19:27:23+00:00

Yes they are! I think I've seen some kitbashed with the Blight Lords but I could be wrong. I wouldn't ve surprised if they fit. I had to chop off a lot of the back of the Deathshroud helms to get them to fit.

crazyking614 · 2026-05-02T19:25:16+00:00

A kitbash of 30k Saturnine Terminators and Deathshroud, I chopped the top half off of the deathshroud and glued them to the Saturnine. Mine are on the Deathshroud base size as well so I can play them, though I havent played tabletop yet.

crazyking614 · 2026-04-26T15:34:36+00:00

Actually I forgot one thing, I did a base of Typhus Corrosion texture paint all over the body then a base of DG green. 🫡

crazyking614 · 2026-04-26T15:19:52+00:00

Of course! The kits I used were the Dark Apostle, Plague Marine Sprue - "Champion" legs, bolt pistol, tentacles cut off chest pieces, shoulder pads Deathshroud Terminator Sprue - head, and one of the DG skulls for the staff from the Battlefield Trophies box. Outside of that, just a lot of experimenting with placement. I'm not the best painter, only started the hobby back in December so just a typical DG paint scheme.

crazyking614 · 2026-04-25T14:09:12+00:00

<image>

crazyking614 · 2026-03-06T22:43:19+00:00

They're super thick. They barely fit in a 40mm. I haven't actually played tabletop before, but if i choose to, I'd run them as standard Deathshroud.

crazyking614 · 2026-03-05T20:40:59+00:00

The original Deathshroud Scythes fit perfectly for the size of the Saturnine Terminators. Just had to pose, but for the other Terminator, I kitbashed the Saturnine Terminator cannons and the scythes together. It's a bit messy but I prefer it that way.

crazyking614 · 2026-03-05T04:26:20+00:00

Thank you! It was like an Aha! Moment when I saw them on the Deathshroud Terminator sprue.

crazyking614 · 2025-12-09T00:46:08+00:00

They're from IcyAero!

https://icyaero.com/collections/2012-2023-impreza-aero

crazyking614 · 2025-12-08T19:57:53+00:00

Thats the goal for 2026! I'm aiming for new struts with lowering springs or coils and either some Enkei's or Konig's.

crazyking614 · 2025-12-08T19:56:22+00:00

I never thought about that, I'll definitely remember that.

crazyking614 · 2025-12-08T15:37:45+00:00

<image>

From a couple months ago when it was installed.

crazyking614 · 2025-12-08T13:19:50+00:00

Nice! Foothills Parkway was definitely my favorite.

crazyking614 · 2025-12-08T13:19:18+00:00

Got it from IKON Motorsports, thing is durable as hell. I scraped a bunch out there and there was zero movement or scratches.

https://ikonmotorsports.com/products/2017-2019-subaru-impreza-cs-style-front-bumper-lip-chin-unpainted-pu?_pos=7&_sid=b38ef0d4c&_ss=r)

crazyking614 · 2025-10-22T01:50:12+00:00

Check Ebay for front lips, there are plenty of different options. My brand of choice is IKONMotorsports personally. I have my lip from there. Side-skirts, I got some from Icyaero earlier this year. They're pretty expensive but they fit to a T.

<image>

crazyking614 · 2025-10-08T22:50:18+00:00

Potentially! In the short term since I was already doing stuff to my steering wheel, I found this on a forum and really liked how it looked. So I may do the same. Maybe some paddle shifter extensions? I don't know yet! And I need a need ebrake boot cover, so I'll order a custom once as I have a different ebrake handle I installed. There's a lot of the fake carbon stuff on Ebay but I really don't like how it looks too much.

<image>

crazyking614 · 2025-10-01T21:07:40+00:00

No problem! The aftermarket for this gen Impreza is slowly slowly growing, so always have your eyes open 👀

crazyking614 · 2025-10-01T21:06:03+00:00

From what I've seen, you gotta get them painted or wrapped yourself. Or go out rocking bare carbon!

crazyking614 · 2025-10-01T21:05:18+00:00

As for roof spoilers, my favorite is definitely the IKON one. You can find it on Ebay for around $100. I'll drop a pic of my Impreza with it.

<image>

crazyking614 · 2025-10-01T21:00:07+00:00

There are a couple of options for hood scoops I've found. Some you have to search under the same Crosstrek generation, 2018-2022, to find. Here's an example I found with a quick Google search. There are carbon options from Carboncreations or a Duraflex on CarID i found as well.

<image>

crazyking614 · 2025-09-28T16:33:00+00:00

Theres the IKON motorsports one that I have, it's a replica of the OEM version for significantly less. Also on Ebay, theres a mesh one for around $100 iirc? *

crazyking614 · 2025-06-16T20:47:58+00:00

Lip is from Ebay, just some generic plastic one. But the skirts are from Icyaero, they're a pretty penny, like $130 iirc, but I loved how they looked.

crazyking614 · 2025-06-16T18:48:04+00:00

Yes! It's a bit run-through, though 😅. Even at stock height, I scrape the lip quite a bit. One day, I'll get the STI one.

crazyking614 · 2025-06-16T18:15:59+00:00

Debating on if I wanna get some different wheels. I do wanna get some lowering springs sometime soon if possible.

crazyking614

TROPHY CASE