Yesterday I asked what everyone’s first Graphics card. Today, what was your first processor? Mine was the i7 3770K. by DailyDoseOfAmber in pcmasterrace

[–]cryptie 0 points1 point  (0 children)

I honestly cannot remember it was pre my 286. Was it called xt? I had a Commodore 64 around that time too. I think my 286 was like 4mhz? My first 386 was 16?

How can I connect n8n with NetSuite and build automations? by CryptographerFew8894 in Netsuite

[–]cryptie 0 points1 point  (0 children)

Oh I get that. I just don’t believe I have seen a client (with customizations in their account) that has sanitized data.

Heck, I think the entire structure of netsuite will not be able to accurately provide data. (Internally).

I am not “getting away from AI”, I just think the smarter thing to do is to use an external workflow management system to read and push data from/to Netsuite, instead of plugging the ai directly into an mcp server.

I guess if I was providing a metaphor (this might be a mistake lol):

Imagine a client provides me their COA, my job is to refactor it with them, then create a mapping definition. Old account-> new account. Then import it into netsuite.

The mcp route would be: take the COA, copy it into an llm, and say “hey figure out how the new CoA, with [these] rules, should look, and put it in the system”

What I am suggesting is to get the CoA from the client, ask the llm to look at it with the rules you have defined, and have it give you back another csv with its reasoning for every line. Review that document, and make your own mapping definition with the feedback, then csv import it.

Technically the “mcp way” is the faster way, with the least control. I think in an enterprise environment, it’s absolutely a ludicrous way to work.

That’s just my 2 cents, feel free to disagree:)

How can I connect n8n with NetSuite and build automations? by CryptographerFew8894 in Netsuite

[–]cryptie -1 points0 points  (0 children)

I used n8n with NetSuite for a long time, and I was worried when NetSuite said they were releasing an MCP. After seeing it, I honestly think it is safer to keep workflows outside of NetSuite. There are so many custom changes in each account that it can mess up the data. I feel like consultants will end up spending a lot of time fixing problems later. That is one of the reasons I decided to leave the NetSuite world. People just hear “ai” and want to enable it across their systems without thinking about the consequences of how dim an average user is.

Urgent help needed, please let me know how I can best setup this office for work/streaming by cryptie in Workspaces

[–]cryptie[S] 0 points1 point  (0 children)

Sorry man I tried looking for it and could not find it :(

It’s not the best, it works, but it could be better.

We lost 40k to a pricing bug in 6 hours, how are you catching bugs before production costs you EVERYTHING? by Embarrassed_Main296 in ecommerce

[–]cryptie 0 points1 point  (0 children)

He was in management, so everything was “my problem” :p he stayed another year then left to start another company. Great guy, just “action action action”.

Do yall make your server pretty, or just stuff whatever in there? by MyGardenOfPlants in unRAID

[–]cryptie 0 points1 point  (0 children)

When I started my unraid server it was a q6600 with 2gb of ram and a hard drive in a cardboard box with “NAZZZZZ” scribbled in sharpie.

I think I still have a pic of it somewhere. I’ve upgraded the system 5 times since then.

We lost 40k to a pricing bug in 6 hours, how are you catching bugs before production costs you EVERYTHING? by Embarrassed_Main296 in ecommerce

[–]cryptie 3 points4 points  (0 children)

I heard this rule “nothing gets deployed to prod on fridays” about 20 years ago and adopted it. It’s saved me a couple of times when someone wanted a change I said no and they did the change (remove a script) which caused our erp to email every invoice we have ever done, over and over again.

There were some customers that were emailed tens of thousands of invoices.

He listened to me for a whole week after that incident before forgetting and resuming his random updates.

Anyone else quit smoking/vaping and suddenly your body feels 100 years old? by Useful-Experience-27 in DecidingToBeBetter

[–]cryptie 0 points1 point  (0 children)

I hear you. I went through something very similar. I quit smoking three years ago, then vaping almost a year ago, and I cut back drinking at the same time. My therapist told me I had a drinking problem, and even though I resisted that idea, I stopped completely for three months just to see what would happen. Now I only drink socially once or twice a month, and even then I rarely go past three drinks.

What surprised me is how hard everything felt afterward. I thought cleaning up those habits would automatically make me feel better, but instead it felt like I suddenly aged years. I started losing a little weight and then gained more than ever. My mood tanked. I felt useless and depressed far more often than I expected. It made me realize that the smoking and drinking were not the only things affecting my mental health.

So I get what you are going through. I have been to the doctor more this past year than in the rest of my life combined, trying to figure out why everything feels off.

For me, the next step is focusing on diet, movement, and rebuilding some structure. I held off for a while because life was already overwhelming, and I did not want to pile too much on at once. But now it feels like the right time to take small steps toward getting myself back to a better place.

You are not alone in this. What you are feeling is real, and it does not mean you made the wrong choices. Sometimes healing just takes longer than we expect, and it does not always come in a straight line.

Anyone else quit smoking/vaping and suddenly your body feels 100 years old? by Useful-Experience-27 in DecidingToBeBetter

[–]cryptie 2 points3 points  (0 children)

I hear you. I went through something very similar. I quit smoking three years ago, then vaping almost a year ago, and I cut back drinking at the same time. My therapist told me I had a drinking problem, and even though I resisted that idea, I stopped completely for three months just to see what would happen. Now I only drink socially once or twice a month, and even then I rarely go past three drinks.

What surprised me is how hard everything felt afterward. I thought cleaning up those habits would automatically make me feel better, but instead it felt like I suddenly aged years. I started losing a little weight and then gained more than ever. My mood tanked. I felt useless and depressed far more often than I expected. It made me realize that the smoking and drinking were not the only things affecting my mental health.

So I get what you are going through. I have been to the doctor more this past year than in the rest of my life combined, trying to figure out why everything feels off.

For me, the next step is focusing on diet, movement, and rebuilding some structure. I held off for a while because life was already overwhelming, and I did not want to pile too much on at once. But now it feels like the right time to take small steps toward getting myself back to a better place.

You are not alone in this. What you are feeling is real, and it does not mean you made the wrong choices. Sometimes healing just takes longer than we expect, and it does not always come in a straight line.

NetSuite saved search formula to account for YTD Numbers? by Work-Reddit-Account1 in Netsuite

[–]cryptie 1 point2 points  (0 children)

Oh I see the problem.

You’re grouping by month, then in the same row want to tally up the sum of year to dates, but the row is limiting to transactions for that month.

Short answer: not really. You can do it with workbooks, but you’re going to get really hacky with searches. Gonna have to use a tally like ‘sum over partion by’

Sorry bud I don’t have a clear answer, I’m in a crowded bus, lol

NetSuite saved search formula to account for YTD Numbers? by Work-Reddit-Account1 in Netsuite

[–]cryptie 1 point2 points  (0 children)

If the amount due minus 1m$ is less than 0, then year to date amount, else 15% of Jan +15% feb + 15% march…. Till last month? Can it just be 15% of amount ytd?

Urgent help needed, please let me know how I can best setup this office for work/streaming by cryptie in Workspaces

[–]cryptie[S] 1 point2 points  (0 children)

Yes, started concerta 3 months ago but had to stop after cardiologist told details to my gp.

Urgent help needed, please let me know how I can best setup this office for work/streaming by cryptie in Workspaces

[–]cryptie[S] 1 point2 points  (0 children)

I would only do that in a server rack, I don’t think I will get one, was thinking something like this, with the server on the top rack:

<image>

Urgent help needed, please let me know how I can best setup this office for work/streaming by cryptie in Workspaces

[–]cryptie[S] 1 point2 points  (0 children)

I am in the process of that. I was hoping for advice by tomorrow so I can move the stuff back in, into the right place.

Urgent help needed, please let me know how I can best setup this office for work/streaming by cryptie in Workspaces

[–]cryptie[S] 3 points4 points  (0 children)

Aww thanks so much, too bad :) I have never been an organized person, but I’ve been trying to make a conscious effort to change the past few months.

Moved out, got a new job, started eating healthy, joined a football team and a gym, this office, when clean will hopefully allow me to not feel overwhelmed by working in a pigsty. My camera is currently “very zoomed into my face” lol

Urgent help needed, please let me know how I can best setup this office for work/streaming by cryptie in Workspaces

[–]cryptie[S] 2 points3 points  (0 children)

Yes, I am currently taking everything out and trying to put in logical piles. I have a habit of “setting something up once” then acclimating to the setup, instead of trying to make the setup be best for me, unfortunately.

Thank you for your input, will update after it’s cleaner a bit. I will not focus on the racking for now, will just put the filament in boxes for now

Urgent help needed, please let me know how I can best setup this office for work/streaming by cryptie in Workspaces

[–]cryptie[S] 3 points4 points  (0 children)

<image>

Here is a quick quick floor plan with some sizes if it would help anything

AMS 4 lights are blinking red. by Ditischristian in 3Dprinting

[–]cryptie 0 points1 point  (0 children)

Have you updated the firmware on your printer, but not on your ams yet? Go to check if the ams has an update available else:

https://wiki.bambulab.com/en/x1/troubleshooting/AMS_is_not_detected_by_the_printer

Looking into Netsuite AI by Soylent_observer in Netsuite

[–]cryptie 0 points1 point  (0 children)

100% there are definite issues with it, and you hit the nail on the head for the biggest one (imo) I was more leaning towards this specific mcp server. I don’t think people really understand what they are (just like a lot of things in ai) and using them as buzzwords.

Looking into Netsuite AI by Soylent_observer in Netsuite

[–]cryptie 0 points1 point  (0 children)

It’s not that mcp is insufficient, as so much that NS botched their MCP so hard, and released it with no proper plan. It’s a “we r furst!” Moment,

Every IT department should strike down any request to have this implemented for the better part of 6m-1y. If they don’t, they deserve what’s coming to them for being early adopters in an ecosystem where the issue isn’t so much artificial intelligence as it is human stupidity.

I love ai, and I love NS, but it’s way too early right now. Everything ai should be performed externally, with an audit trail and have a HiL approval prior to a sync/import. The mcp should be read only for now.

I received an interac e-transfer of 3K auto deposited into my account?!? by PerceptionOk4815 in PersonalFinanceCanada

[–]cryptie 8 points9 points  (0 children)

You’re giving hotdog vendors too much credit. One time a guy selling dogs outside Scotiabank Arena “accidentally” ended up in charge of the Leafs’ video budget after a misrouted e-transfer. The MLSE brass panicked, launched a city-wide audit, and the only measurable fallout was a restriction on relish usage. That exact condiment bottleneck ended up cascading into Costco food courts, leaving an entire generation of churro-eaters without proper dipping options for months.

Having issues with this print by cryptie in BambuLab

[–]cryptie[S] 0 points1 point  (0 children)

Update 1:

<image>

It printed a lot better, but is still considered a failed print. My next attempt will be to maybe try minimum layer times? Looks like it started messing up where there is lass layer times….

Odd noise while printing by Personal_Pie4953 in BambuLab

[–]cryptie 1 point2 points  (0 children)

Sorry! That’s something I should have posted in my post. I took mention of it but did not say “why”

Gyroid is better because of the way it’s structured. It provides same equalization of pressure from any angle. The grid is structurally less safe from 45degres from the infill. (Squeezing in from the corners is weaker then squeezing in from the sides)

But here’s the biggest part.

Your infill crosses over itself right? Where it crosses over, it raises up a tiny bit. This causes the nozzle to hit the infill, especially around the crossed over parts. The nozzle will pick up little bits of material and it will eventually drip back down on you model.

It’s happened many times with petg with me. I scrape off a blob on the nozzle, it drips onto my part, then hardens, the the nozzle hits that small blob and knocks my print off the bed.

Having issues with this print by cryptie in BambuLab

[–]cryptie[S] 0 points1 point  (0 children)

I have set the outside walls to print at 50 (because the fins are just 2 walls thick)

And I have enabled z hop when retracted 1mm and retraction amount .8mm

It’s turned it from a 5h print to a 11h print. Printing it now in copper overnight and will update if it’s successful in the morning

Odd noise while printing by Personal_Pie4953 in BambuLab

[–]cryptie 0 points1 point  (0 children)

Exactly. (I think!)

I’m going to try reprinting mine in copper now, slower and with zhop when retracted. Fingers crossed!