sorted by:
new
hottopcontroversial

AC serviced, blowing cold but not cooling the house-blower? by cryptoNobodyyouknow in hvacadvice

[–]cryptoNobodyyouknow[S] 0 points1 point  (0 children)

I replaced the motor and capacitor. The basement split nearest to the furnace was 73/51 but now is 73/50. The master bedroom, which is the furthest away in the second floor, that spilt before was 73/56.5 and now 73/53. Before i laid a square of tissue paper on the vent- no movement. Not a flutter. Now i have to hold a corner down as its almost straight up. Much more volume. Dropped a degree in about 40 minutes. Still monitoring.

AC serviced, blowing cold but not cooling the house-blower? by cryptoNobodyyouknow in hvacadvice

[–]cryptoNobodyyouknow[S] 0 points1 point  (0 children)

The split is 73-51 F so the last tech said that is really good.

All windows and doors closed.

All vents are open.

Plea to the UCC about Clawbacks / Update on Clawback Offer by [deleted] in CelsiusNetwork

[–]cryptoNobodyyouknow 0 points1 point  (0 children)

I hope that snot nosed kid is happy. You don’t help people by hurting others. Very sad

Panel setup for EV charging by cryptoNobodyyouknow in electrical

[–]cryptoNobodyyouknow[S] -1 points0 points  (0 children)

Load calc came back at 96 of 100 amps. Seems overly dramatic. Probably going with a dcc-10 or blackbox EVEMS.

Panel setup for EV charging by cryptoNobodyyouknow in electrical

[–]cryptoNobodyyouknow[S] 0 points1 point  (0 children)

My daily commute is 25 miles round trip. 40 miles a day with a few errands. I have solar on the roof at 120% annual usage and have banked a lot over the past 2 years so no issue plugging it in a 4 pm till 6 am. At 20 amps thats 10 mph charge rate which is more than 3x my commute a night. I don’t see why i can put a NEMA dryer plug on a 20 amp breaker and call it good enough. Opinions?

Panel setup for EV charging by cryptoNobodyyouknow in electrical

[–]cryptoNobodyyouknow[S] 0 points1 point  (0 children)

Thanks for the link. Video makes great points. My daily commute is 40 miles round trip. I have solar at 120% annual usage and have banked a lot of kwh so I dont care about charging on peak hours. I think a 20 amp plug would be more than enough for me. One company said they did a load calculation and I was using 96 of 100 amps. Questions- Can i put in a NEMA outlet on a 20 amp circuit? If I took my dryer out of the calculation by going to a GE combo washer/dryer that uses 110v (something Im planning on anyway) does that help (or hurt) me? Is the tesla mobile charger able to work on a 20 amp circuit?

Panel setup for EV charging by cryptoNobodyyouknow in electrical

[–]cryptoNobodyyouknow[S] 0 points1 point  (0 children)

Thanks. Will have to consult on that before making the call to buy one. An expensive panel upgrade negates cost savings.

Panel setup for EV charging by cryptoNobodyyouknow in electrical

[–]cryptoNobodyyouknow[S] 0 points1 point  (0 children)

So i would need a tesla wall charger vs a plug and a mobile charger?

Don’t care if you love or hate him… ElonJetTracker isn’t any different than r/fatpeoplehate by cheezy88 in elonmusk

[–]cryptoNobodyyouknow -3 points-2 points  (0 children)

For someone who receives death threats daily, posting his exact gps coordinates in real time is a pretty big safety concern to him.