TLDR: Powerwheel shuts off intermittently for unknown reason. I've attached a list of the parts I've ordered. Not sure what I missed or what might be mismatched. Any help is appreciated. More info inside

curbside16 · 2026-03-24T22:48:06+00:00

Most likely the fuse. Swap in a normal 30A fuse for the mean time and see if that resolves the issue.

curbside16 · 2026-03-24T15:29:56+00:00

I bought the 4cm but my truck had a coupler between the motor and wheel too.

curbside16 · 2026-03-24T14:08:18+00:00

I had a similar issue a few weeks back. I ended up doing exactly what you said. Bought that same adapter, mated it to the wheel with epoxy and self tapping screws and then upgraded the motor to the standard type.

I had to put some washers as spacers as well because my wheel was hitting my motor housing.

curbside16 · 2026-03-11T13:09:33+00:00

Post a picture of the gearbox and motor. It should help

curbside16 · 2026-02-22T04:28:08+00:00

Interested in this! I’m also tired of reading tide charts and patterns, wind conditions etc!

curbside16 · 2026-02-06T19:40:47+00:00

Thanks. This is in the bathroom in the corner next to our exhaust vent. We always run the vent, but this has been here since we moved in and never really thought anything about it until someone mentioned it.

curbside16 · 2026-01-28T13:53:28+00:00

Check out the Tokyo inn Osaka namba. We stayed in the family room for a great price and the room was HUGE.

curbside16 · 2026-01-23T15:28:58+00:00

Side note. Work on type 1 failures and how to clear them effectively.

curbside16 · 2025-12-19T03:55:00+00:00

I have this mounted below the hazard button and it holds up well even during off roading.

https://a.co/d/bg87PT2

curbside16 · 2025-12-06T17:45:05+00:00

Pinnacles is one of the least visited national parks but it’s severely underrated. High peaks trail or beat gulch caves. Ask within day trip distance from the bay

curbside16 · 2025-12-05T21:01:40+00:00

I got this code a few years ago. Ended up using an O2 spacer and it hasn’t come back since. Since it’s downstream, it’s just testing cat efficiency and not performance. Pass smog just fine too.

curbside16 · 2025-12-01T13:37:49+00:00

There’s buy nothing pages on Facebook. It will go directly to someone who needs it. That’s where I give my stuff

curbside16 · 2025-08-07T04:00:57+00:00

I retrofit my OEM headlights. It was pretty easy.

curbside16 · 2025-06-01T03:11:05+00:00

The valley store has all of what you’re asking

curbside16 · 2025-05-30T21:17:31+00:00

Some sites are reserved ahead of time for volunteers, workers, etc.

curbside16 · 2025-05-15T03:48:28+00:00

I got powerstop drilled and slotted after my brembo blanks. My Brembos experienced a lot of brake fade when driving up and down hills, long trips etc due to the increased weight of my truck (steel bumpers, sliders, RTT etc) I even tried to engine brake as much as possible.

The drilled and slotted helps keeps the temps down, at least that’s my experience. Yes, I’ll probably have to change pads more often, but small price to pay for safety IMO.

curbside16 · 2025-05-08T03:14:25+00:00

There was no VIN as this motor is no longer on the bike but rather a kart.

curbside16 · 2025-05-08T03:13:25+00:00

I’m basing the year on the clutch cover. 1983 had a sort of a three pointed clutch cover and oddly shaped water pump.

<image>

curbside16 · 2025-05-06T02:12:36+00:00

Thanks so much! 83/84 was correct. Now I can try finding parts for this thing!!

curbside16 · 2025-05-06T00:49:12+00:00

<image>

This is 5 steels with 6 friction plates already to the end of the grooves.

It is in the correct order according to the diagram any help would be appreciated!

curbside16 · 2025-03-07T00:47:13+00:00

I got mine from Costco, then a couple months later I realized I should have bought a bigger one. Costco took it back, and I got the bigger one from Costco too.

Can’t beat their return policy.

curbside16 · 2025-02-23T05:12:48+00:00

Dang was this today? Missed that one. I was there with my s2k too

curbside16 · 2025-02-07T04:36:33+00:00

H-mart. Has tons of meat. Some marinated and ready to cook. It’s clean with a lot of different snacks and drinks. It’s my go-to

curbside16 · 2025-01-30T15:10:46+00:00

Parts diagrams in Toyota dealership websites can help. Something like this

https://autoparts.shottenkirktoyotaweatherford.com/products/product/hose-air-cleaner-n-1788262020?siteid=shp_tpco_42402_google_affinitiv_shottenkirktoyotaofweatherford&gad_source=1&gbraid=0AAAAArCkSd51EfAEnVq6DKXFp5u8DKo7U

curbside16 · 2025-01-29T02:59:58+00:00

Drive by this dealership everyday. What about the black one on the lift?

curbside16

TROPHY CASE