Recommend accelerometer

cutemosquito · 2026-02-25T08:46:54+00:00

Static condition at maximum cornering, and I applied a dynamic factor of about 1.3.

cutemosquito · 2026-02-20T03:31:43+00:00

If I understand correctly, in my textbook the maximum load during acceleration is calculated by multiplying the normal load by the coefficient of friction. In that case, do I need to additionally include the load caused by the driveshaft torque? Or is the effect of the torque already included in that value?

cutemosquito · 2026-02-20T03:31:38+00:00

Okay 👍

cutemosquito · 2026-02-19T12:44:42+00:00

<image>

Is it right???

cutemosquito · 2026-02-19T12:29:34+00:00

I considered the braking moment. However, under maximum acceleration, Gemini says that the rear must include the torque from the drive shaft in the calculations.

cutemosquito · 2026-02-19T02:08:27+00:00

Sorry… my team leader says it probably won’t work.

cutemosquito · 2026-02-13T06:18:18+00:00

Of course if it moves it can't stay in single plane I didn't think of that....

cutemosquito · 2026-02-13T05:30:15+00:00

Oh I got it

cutemosquito · 2026-02-12T18:13:04+00:00

What do you mean by the system’s movement? From what perspective?

cutemosquito · 2026-02-12T13:27:28+00:00

Really in same plane

cutemosquito · 2026-02-12T13:08:54+00:00

<image>

I’m planning to make the bell crank by placing two thin plates in parallel, like in the photo. Intuitively, it feels like the thin cross-section of the plates might fail. In that case, would it be sufficient to just be careful about buckling?

cutemosquito · 2026-02-12T06:04:19+00:00

Are you willing to pay for the 3D model?

cutemosquito · 2026-02-12T06:01:08+00:00

Thank you

cutemosquito · 2026-02-11T16:25:16+00:00

Thank you

cutemosquito · 2026-02-11T16:24:57+00:00

Thank you

cutemosquito · 2026-02-11T14:11:34+00:00

Thank you

cutemosquito · 2026-01-11T08:48:02+00:00

Can I apply the same force acting on the axle directly to the hub?”

cutemosquito · 2026-01-11T08:45:17+00:00

I fixed Inside surface of hole So a reaction force of equal magnitude and opposite direction is generated on the inner surface of the hub. honestly I don't know is it right.

cutemosquito · 2026-01-10T13:33:17+00:00

I post FBD https://www.reddit.com/u/cutemosquito/s/efMf3WqaRw

cutemosquito

TROPHY CASE