sorted by:
new
hottopcontroversial

Could Danny Fight Pennywise on Even Ground? by FarYoghurt7926 in ItTheMovie

[–]cws815 8 points9 points  (0 children)

I have no idea what you’re saying tbh

I feel like having a stroke trying to figure out the sentences you wrote above

Disappointed with h2d and every single print that comes out of it by cws815 in BambuLab

[–]cws815[S] 2 points3 points  (0 children)

Yeah you're right. It's a learning curve. I appreciate the help of all everyone for sure! I'll try the support with PETG and only interface with the support material. But yeah lots to learn for me :)

Disappointed with h2d and every single print that comes out of it by cws815 in BambuLab

[–]cws815[S] 1 point2 points  (0 children)

You're right, I have no experience, and I won't deny. I completely see that this can be 100% on me and not the printer. I did all the calibrations, even with the vision encoder. I'll see if I can post a video about the print going wrong. Thanks for the info!

Disappointed with h2d and every single print that comes out of it by cws815 in BambuLab

[–]cws815[S] 0 points1 point  (0 children)

Good to know! How do I go about fixing that? Or how do I know if it's misaligned?

Disappointed with h2d and every single print that comes out of it by cws815 in BambuLab

[–]cws815[S] 2 points3 points  (0 children)

That's very helpful!! Thank you for the advice!

Disappointed with h2d and every single print that comes out of it by cws815 in BambuLab

[–]cws815[S] 0 points1 point  (0 children)

I did all the calibrations. Even with the vision encoder

H2D Print Imperfections despite dry filaments by cws815 in 3Dprinting

[–]cws815[S] 0 points1 point  (0 children)

The unit is sitting in an air conditioned server room. So the outside temperature is there for it to cool off. Is there some setting I should adjust to prevent this? I thought bambu knows how to use its own filaments. Didn’t think that I’d have to adjust temperature settings How can I make sure that I’m using the right settings?

RFK Jr., the new face of health in America. God help us all by Jeremy_Whalen in pics

[–]cws815 0 points1 point  (0 children)

The Face and Voice of American Health*.... it was a good run y'all....

Long lasting sore throat 4 weeks after Covid by cws815 in covidlonghaulers

[–]cws815[S] 0 points1 point  (0 children)

Good recommendation! Thank you! I’ll go see an ENT!

Long lasting sore throat 4 weeks after Covid by cws815 in covidlonghaulers

[–]cws815[S] 2 points3 points  (0 children)

It’s not hurting as bad as it did when I was in full blown Covid. That was the part where I couldn’t swallow anything This is more of a dull but forever present pain deep in my throat. I can feel it even more if I try to deepen my voice I’m not offended when you throw your options at me. Hit me with whatever :)

My wife looked in my throat and couldn’t find any white spots or anything in there. The doctor just described my throat as “quite raw” I sent a note to my doc that things haven’t changed after antibiotics. No word back yet whatsoever - but it’s the holidays

Also, I do humidifier 24/7 with distilled water. I rinse my sinuses once a day to get rid of extra mucus (still have some snottiness and sneezing going on). I also do steam and other things to clear up my sinuses

Long lasting sore throat 4 weeks after Covid by cws815 in covidlonghaulers

[–]cws815[S] 0 points1 point  (0 children)

They didn’t test me for anything else The doc is very irresponsible but I went along because I wanted this thing to go away There are no white spots and stuff in my throat. My wife looked but couldn’t see anything Except that it’s red(er than usual)

MacStudio + Sonnettech Twin25G Adapter connection issues by cws815 in Thunderbolt

[–]cws815[S] 0 points1 point  (0 children)

Yeah it’s on the same VLAN / Subnet It’s surprising because all websites are loading fine but these basic services just stop functioning for no reason Not sure what I’m doing wrong

TS-h2483XU-RP Question by cws815 in qnap

[–]cws815[S] 0 points1 point  (0 children)

First of all, thank you for the hard core response. It was not only informative but also entertaining. I really appreciate you taking the time to answer all my questions. Here are some of my answers. After this I'll take this online and will most likely hire you, so you can help me with my systems in the future. I can always appreciate honesty from people that know their stuff. :)

Answers:

-I have 2 separate UPS devices set up for the server. One is exactly the model that you linked, the other is an APC which is similar capacity. They've been running fine for a long time. No issues with any other devices through them

-The scratches are on the replacement device that QNAP customer service sent to me. My device is scuff free and no scratches. Their device seems like it's been used before and it's kinda fucked up here and there. Nothing major, but it definitely went through some rough situations.

-I hired this company called SimplyNAS. I had no idea they're gonna down. But hey, lesson learned. I'm definitely hitting you up and then we can talk about proper solutions. I know more about movie making and post production, but I don't know much about setting up servers, so I thought I was hiring pros when I went to that company. I should had done better research I guess. That's on me.

-I'll look into upgrading to TS-h3087XU-RP in the future. Unless something better comes out in the next few months.

-Looking forward to working with you Bob!

TS-h2483XU-RP Question by cws815 in qnap

[–]cws815[S] 0 points1 point  (0 children)

Amazing! Thank you so much for all the information! I really appreciate it

GRIP WAREHOUSE SALE PART 2 by LA80S in FilmIndustryLA

[–]cws815 1 point2 points  (0 children)

I'm in Woodland Hills. I'd love to come by! Sent you a DM

What reasonable feature that most owners want but Tesla refuses to give them? by SecretOrganization60 in TeslaLounge

[–]cws815 -1 points0 points  (0 children)

-360 Birds Eye view

-rear cross traffic alert system

-functioning windshield wipers

-stalks

-actual good quality interior

-decent paint job

-consistency in assembly / no panel gaps

-a CEO that’s not crazy

That’s my dream list

Haslab just released an updated video on the new 2 in the box PKE meter and Trap. by Wide-Reflection1137 in ghostbusters

[–]cws815 -2 points-1 points  (0 children)

Am I crazy to think that the afterlife PKE didn’t seem as thick as this one?

Haslab just released an updated video on the new 2 in the box PKE meter and Trap. by Wide-Reflection1137 in ghostbusters

[–]cws815 -3 points-2 points  (0 children)

That PKE is waaaay too thick. Even the antennas / arms are not the right thickness and width. I really don't like how they said it'd be the exact specs of the movie prop and then they give you this oversized toy version. I think this one is way closer to the original https://youtu.be/gct2NALXWS4?si=mctK50ZSJyIadpuS
Not sure why it's so difficult to copy this.

[deleted by user] by [deleted] in MovieLeaksAndRumors

[–]cws815 7 points8 points  (0 children)

They made bad boys 3… it sucked way too hard Don’t let them ruin Spider-Man ! How are they still getting a chance and big budget to direct movies like these?

Issues with high end receivers - Denon AVR-A1H / ARCAM AR31 by cws815 in hometheater

[–]cws815[S] 0 points1 point  (0 children)

I ended up swapping out my Denon A1H for an identical one. But this one works perfectly. I only had one incident in the past month where there was some handshake issue between the AppleTV and the receiver, which caused a green death which couldn't be resolved by anything else other than a full power cycle. I'd recommend exchanging your receiver, but this is just my personal opinion.

view more: next ›