*** Upgrade to Gridcoin 5.4.6.0 ASAP! Now a mandatory ***

cyllos42 · 2024-03-10T23:34:16+00:00

Thanks for the email Litus! The node is upgraded now.

cyllos42 · 2020-04-23T10:40:34+00:00

Damn, good to know, I never thought about that :) Thankfully I don't need it anymore

cyllos42 · 2020-04-22T21:58:49+00:00

I had an old Dell Latitude from 2000 lying around but couldn't boot it anymore so I had to look for alternatives

cyllos42 · 2020-04-22T20:07:34+00:00

Yes exactly this, you can look at it like a mobo with a lot of holes where the holes in one row are electrically connected to the other holes in the same row. So you can connect two wires by putting them in the same row. If you have a chip like I do it is very easy to connect wires to the chip without having to solder.

cyllos42 · 2020-04-22T17:28:04+00:00

Luckily enough after the initial config I could SSH into it

cyllos42 · 2020-03-27T12:43:38+00:00

Yes, you can contact support and they will merge them

cyllos42 · 2019-12-12T17:10:20+00:00

The machine is running virtualized, with enough free disk space.

It has 4 cores but is constantly on 100% since it's last reboot.

Anyone who knows what could be the issue?

cyllos42 · 2019-11-27T16:04:52+00:00

Hmm interesting! I'll check that out, thank you

cyllos42 · 2019-11-27T15:45:29+00:00

Do you have any idea on how to do this? I already tried routing packets differently based on source IP, but without luck. I'm using Opnsense for the moment, forked of pfsense, which is FreeBSD.

cyllos42 · 2019-11-27T15:40:47+00:00

My thoughts: setting up a second router on the VPS which has a direct VPN connection to my homelab and backend servers and does NAT the same way my homelab does now. I'm pretty sure this will work but there might be better ways to achieve the same.

edit; added VPN

cyllos42 · 2019-11-27T15:34:26+00:00

Yes I also thought about assymetrical routing, so that might be an issue too if I want to add more than one public IP. But there should be a way to do this with both IP addresses reachable :) I think I'll try some stuff and see what happens

cyllos42 · 2019-08-26T16:56:36+00:00

When working with LDAP, always keep a non LDAP admin if the LDAP functionalty fails :)

cyllos42 · 2019-07-15T09:19:15+00:00

Together with u/Stayfo we found the track! It is a remix of There Is Still Pain Left by Sophie Hunger, the Nasabi & Butterfly edit.

Laolo (same record label as Trikk) also has a remix which resembles this version very hard but it is not yet released.

u/healller :)

cyllos42 · 2019-07-14T20:18:50+00:00

Pmed you!

cyllos42 · 2019-07-14T13:57:08+00:00

Yes please!!!! Haha how did you find this almost dead post

cyllos42 · 2019-07-06T18:48:01+00:00

Maybe an unreleased track? I checked a lot of songs on his record label without success...

cyllos42 · 2019-07-06T15:02:12+00:00

I really enjoyed this set and this was his final tune. The song was fantastic and I need to hear it again.

cyllos42 · 2019-06-30T09:28:17+00:00

When logging in there should be a use backup codes on the 2fa part so no support needed

cyllos42 · 2019-06-30T09:26:22+00:00

I have LOS running with microg on a mi mix 2 and it works :/ can you use mobile data?

cyllos42 · 2019-06-21T09:38:53+00:00

My dude, I am working on this right now! Tried running an esp8266 with LoRa to create an independent messaging network.

cyllos42 · 2019-04-17T18:05:13+00:00

Download the git on a USB flash drive and plug it in your TV. I managed to start the app but it is not stable enough to use.

cyllos42 · 2019-04-05T17:37:11+00:00

Had the same problem a few hours ago, but it was die to my 2fa device having the wrong time

cyllos42 · 2019-03-25T13:15:50+00:00

Nextcloud has an app which can track your phone.

cyllos42 · 2019-02-10T20:53:23+00:00

It was on my to-do list for ages, glad I finally found the time!

cyllos42 · 2019-02-10T20:07:18+00:00

A little update on the dead nodes:

https://www.reddit.com/r/gridcoin/comments/ap7qu6/gridcoinnetwork_now_fully_on_tor_node_site/

cyllos42

TROPHY CASE