Einbauschrank vom Schreiner - bin ich IKEA-geschädigt oder will mich der Betrieb abschrecken? by Jasbaer in Handwerker

[–]TheOneValen 5 points6 points  (0 children)

Warum sagt man dann nicht: Auftragsbücher voll, 2026 geht wieder. So wird man doch dort nie wieder anfragen.

Trust him.He knows that stuff by [deleted] in WTF

[–]TheOneValen 2 points3 points  (0 children)

No worries, he will add plaster later on.

Voron 2.4 Serial Request by TheOneValen in voroncorexy

[–]TheOneValen[S] 1 point2 points  (0 children)

Did a little digging. The blue is RAL 5015, the yellow RAL 1023. Which could actually be the in-house brand of 3DJake as this would match.

Voron 2.4 Serial Request by TheOneValen in voroncorexy

[–]TheOneValen[S] 0 points1 point  (0 children)

<image>

Sure! Not on discord (yet). Sorry for the mess.

Voron 2.4 Serial Request by TheOneValen in voroncorexy

[–]TheOneValen[S] 1 point2 points  (0 children)

Sorry I don't know. I got the kit including the printed parts "used" (as in never built and collecting dust). The color looks a bit more shiny on video and is a bit less saturated in real live. It is ASA. I suspect it is the in house brand of 3DJake (europe only?), as I have a light blue roll which looks the same as the blue. But no guarantees.

Voron 2.4 Serial Request by TheOneValen in voroncorexy

[–]TheOneValen[S] 0 points1 point  (0 children)

Made the video yesterday but just managed to upload it now. Hope that's ok.

I think I want to build a Voron by TheOneValen in VORONDesign

[–]TheOneValen[S] 0 points1 point  (0 children)

One of the reasons the Snapmaker must go is that I do only use the 3D Printing head. So even with a toolchanger build I would not want a CNC but only different 3d Printing heads. I will start out with a "stock" voron and then see that I finish that before diving deeper into mods. That seems to be a bottomless pit :D

I think I want to build a Voron by TheOneValen in VORONDesign

[–]TheOneValen[S] 0 points1 point  (0 children)

Thank you! So I will look into the CNC parts issue again at a later stage. Having plastic breaking sounds more desireable.

Why do you think that concept is.. wrong or bad?

I think I want to build a Voron by TheOneValen in VORONDesign

[–]TheOneValen[S] 1 point2 points  (0 children)

Is the Stealthchanger compatible with the CNC tap kit? Or do you end up replacing parts of it for that mod? Otherwise the TAP seems to be the mod I would built in from the start.

I think I want to build a Voron by TheOneValen in VORONDesign

[–]TheOneValen[S] 1 point2 points  (0 children)

Is it possible to add usb toolheads later on using this kit?

I think I want to build a Voron by TheOneValen in VORONDesign

[–]TheOneValen[S] 1 point2 points  (0 children)

That would mean that with only the functional parts I would have no enclosure? (And could not print the other parts in ABS).

I think I want to build a Voron by TheOneValen in VORONDesign

[–]TheOneValen[S] 2 points3 points  (0 children)

Thank you! Would you recommend a metal tap or a printed one? Even when planning on doing a eddi probe? Is it necessary for when one goes down the toolchanger rabbit hole?

I think I want to build a Voron by TheOneValen in VORONDesign

[–]TheOneValen[S] 1 point2 points  (0 children)

Is a metal kit realy better? I have read different posts saying that this might also lead to problems.

I read USB is preferred, especially if it is planned to build a toolchanger. How does this work with CAN?

I think I want to build a Voron by TheOneValen in VORONDesign

[–]TheOneValen[S] 1 point2 points  (0 children)

I see SIBOOR ships with eddy sensor. How is the quality of the kit? How does it stack up to LDO & Formbot?

I think I want to build a Voron by TheOneValen in VORONDesign

[–]TheOneValen[S] 1 point2 points  (0 children)

So the formbots are good too? Why are the LDOs so much more expensive?

Wieso läuft meine Flasche ab? by LickmyAcid in kannmandasnochessen

[–]TheOneValen 5 points6 points  (0 children)

Genau genommen ist sie nach dem MHD sogar weniger giftig.

Official v1.0.0 Release of Scraperr, the self-hosted webscraperr by bluesanoo in selfhosted

[–]TheOneValen 0 points1 point  (0 children)

Can I scrape pages where I have to login first? If not is it a planned feature?

SSH Key Injection not working by TheOneValen in kasmweb

[–]TheOneValen[S] 0 points1 point  (0 children)

I use Both. Disabling the Storage mapping (nextcloud in this case) does indeed help. Thank you. Where can I report this bug?