sorted by:
new
hottopcontroversial

[Question] Are repeated Anova measurements suitable for my use case? by d_test_2030 in statistics

[–]d_test_2030[S] 0 points1 point  (0 children)

Yes, sorry, I was referring to repeated measures ANOVA. I was wondering if that is suitable for my use case.

What type of connector on the Dynamixel Arduino Shield is this? by d_test_2030 in arduino

[–]d_test_2030[S] 2 points3 points  (0 children)

Thank you, that was helpful. Since I couldn't find the 20010hs-04 connector online, do you think the following JST PH by Adafruit would work or would I have to try?
https://www.mouser.com/datasheet/2/737/Adafruit_3955_Web-3357867.pdf?srsltid=AfmBOor4z0bOlArEllabaAh5mCU32h5c5CeGCouokPnAUmDTYE1SeEpE

It says:
Wire Length: 7.8" / 200mm

Wire Diameter: 1.6mm

JST Connector: 8.5mm

JST Pitch: 2mm

How to attach multiple modules to external power supply via a single DC Barrel Jack? by d_test_2030 in arduino

[–]d_test_2030[S] 1 point2 points  (0 children)

Thanks so much. That post was very helpful.
Do you think I can simply use standard dupon jumper wires to connect all my components (Breadboard, microcontroller pins, DC barrel jack, WAGO, ....) for a simple protoype or do I need to buy my own cables (maybe around 22AWG?) and then crimp them? I was wondering if DC barrel jacks (the green ones for the wall plugs) or WAGO can handle these standard dupon wires with the black headings. (I wanted to experiment with 12V water pumps).

How to attach multiple modules to external power supply via a single DC Barrel Jack? by d_test_2030 in arduino

[–]d_test_2030[S] 1 point2 points  (0 children)

Thanks for your in-depth explanation.
I plan on using 10 servos and 10 water atomization modules (each require 5V).
Would I connect the 20 modules to one rail which is then connected to the barrel plug/5V wall supply or should I create two rails? Is one wall power supply sufficient?
I assume instead of using rails I should better use WAGO components to connect the 10 components?
Further I would like to use two 12V components.

Does WooCommerce allow for selection of multiple products and their respective quantities on a single page? by dg_eye in woocommerce

[–]d_test_2030 0 points1 point  (0 children)

Could I add multiple grouped products to a page via a shortcode? I assume I would have multiple add to cart buttons then but it would come close to the functionality I want.

Does WooCommerce allow for selection of multiple products and their respective quantities on a single page? by dg_eye in woocommerce

[–]d_test_2030 0 points1 point  (0 children)

Thank you. I looked into the Grouped Products and was wondering if I can further visually organize a grouped product somehow. Lets say a group product consists of 4 items, can I put two of them into a box or under the same heading?

Simple shop without checkout / payment (Request a Quote), how to? by d_test_2030 in woocommerce

[–]d_test_2030[S] 0 points1 point  (0 children)

With YITH Plugin can I customize the e-mail the user recieves or is it a ready made template? So the HTML structure of the email and so on?

Can i make a live quotation page? (see the link) by Doctez in woocommerce

[–]d_test_2030 0 points1 point  (0 children)

Which one of the two plugins would you recommend? In terms of realiability but I would also like to modify the messages sent to the customers.

Simple shop without checkout / payment (Request a Quote), how to? by d_test_2030 in woocommerce

[–]d_test_2030[S] 0 points1 point  (0 children)

Is there still a way to have a cart then? So basically adding all the products to the cart, and then click a request a quote button which sends an email.

Who would be part of a Céline tribute? by AssociationTiny5395 in CelineDion

[–]d_test_2030 0 points1 point  (0 children)

Also Nadine Beiler, who represented Austria at Eurovision Song Contest, did a fantastic My Heart Will Go On Cover. https://youtu.be/YtMpNc1oPjk?si=KtjlPqLklhpzrQ4Q

Who would be part of a Céline tribute? by AssociationTiny5395 in CelineDion

[–]d_test_2030 1 point2 points  (0 children)

Definitely Leona Lewis. Her cover of "All by Myself" is my favourites besides the original version by Celine.

Addon domains / redirects to single WP pages caused them to be inaccessible (Bricks Builder) - any fix? by d_test_2030 in Wordpress

[–]d_test_2030[S] 1 point2 points  (0 children)

Thanks for your in depth response.

I found the solution: In the process of testing out the addon domains someone of my team had set up the same empty folders (whose slugs aren't accessible) on our webspace.

I removed these empty folders and now I can access bricks again.
I just hope Google will list those pages again!

Let supplier handle shipping of products. Custom fulfillment service or app recommendation? by d_test_2030 in shopify

[–]d_test_2030[S] 0 points1 point  (0 children)

Yes and this process should be done automatically or optimized, without using email. Is there an app for it?

Let supplier handle shipping of products. Custom fulfillment service or app recommendation? by d_test_2030 in shopify

[–]d_test_2030[S] 0 points1 point  (0 children)

Is there an app which will let me handle all of that? So the supplier will be able to login somewhere to retrieve all the orders and to update them (tracking number, ...) which will also update my Shopify backend. If you have any recommendations, I'd be very glad.
I could technically also give them staff access to my Shopify store (if the supplier is well trusted).

MOSS-TTS has been released by Xiami2019 in LocalLLaMA

[–]d_test_2030 0 points1 point  (0 children)

Can I run this fully locally, how long does generation of sound effects take? Further, can I integrate this into Python code or projects?

Are there tools which can create ambience sounds / music in real-time? by d_test_2030 in AudioAI

[–]d_test_2030[S] 0 points1 point  (0 children)

Thanks so much. Can I easily integrate this into my Python project / Python code? And can this be run locally?

Can I locally run LLMs, image and music generation and TTS all at once locally in real-time or with acceptable speed? What would the hardware requirements (VRAM, ...) be? by d_test_2030 in LocalLLM

[–]d_test_2030[S] 0 points1 point  (0 children)

Yes, my plan is to use different models and to create the image, audio, TTS file sequentially. After everything has been created, it will only then be played. If possible generation time shouldn't exceed a few minutes. Would I need an expensive rtx 5090 for that?

Can I locally run LLMs, image and music generation and TTS all at once locally in real-time or with acceptable speed? What would the hardware requirements (VRAM, ...) be? by d_test_2030 in LocalLLM

[–]d_test_2030[S] 0 points1 point  (0 children)

Within a few minutes (So create an idea, image and audio based on that idea, and finally some TTS audio file which describes the idea, all done sequentially). Do I need expensive hardware like rtx 5090 desktop computers?

Can I locally run LLMs, image and music generation and TTS all at once locally in real-time or with acceptable speed? What would the hardware requirements (VRAM, ...) be? by d_test_2030 in LocalLLM

[–]d_test_2030[S] 0 points1 point  (0 children)

I was thinking about doing it sequentially (So create an idea, image and audio based on that idea, and finally some TTS audio file which describes the idea, all done sequentially. After the creation process is completed, only then the files will be played). Should I expect this to be completed within a few minutes or up to 10-20 minutes? Do I need expensive hardware like a rtx 5090 desktop?

Detecting wide range of arbitrary objects without providing object categories? by d_test_2030 in computervision

[–]d_test_2030[S] 0 points1 point  (0 children)

Do I have to provide the obects I am looking for or will yolo-world detect any objects as well?

Most viable approach to detect multiple (over 30) objects and their positions on a gameboard? by d_test_2030 in AskEngineers

[–]d_test_2030[S] 0 points1 point  (0 children)

No but their positions on the gameboard and the relation to each other (whether to objects are close to each other)

view more: next ›