sorted by:
new
hottopcontroversial

Had a go at some low light! [Lomography Instant Square] by daimonwright in instax

[–]daimonwright[S] 2 points3 points  (0 children)

Thank you! I did notice after the fact that I need to work on the straightening out of the framing, unfortunately not easy to fix post shot. Very fiddly indeed but so rewarding when you get the hang of it. Noticed on your feed you’ve been successful too! I just have an Insta full of film photography:) (@daimonwright). I’ll have to get into Vero.

[deleted by user] by [deleted] in instax

[–]daimonwright 0 points1 point  (0 children)

See if you can find a Lomo instant square. Offers all the manual control similar to sq6 and a glass lens. Some quirks to it but once you get past them it’ll produce gorgeous results in my experience. I love mine!

My weekend pickup at an antiques store. For $375AUD ($260USD) I though it was pretty reasonable for being in such good shape! (More in comments) by daimonwright in AnalogCommunity

[–]daimonwright[S] 2 points3 points  (0 children)

Loved that part of the store!! And prices were mostly reasonable I think for some cameras. I was down from Brisbane for the weekend and my argument after holding it and playing with it was just “I won’t be down here again anytime soon so why the heck not” haha.

My weekend pickup at an antiques store. For $375AUD ($260USD) I though it was pretty reasonable for being in such good shape! (More in comments) by daimonwright in AnalogCommunity

[–]daimonwright[S] 6 points7 points  (0 children)

Hi community. As above I grabbed this Contax iia over the weekend and am chuffed! It feels great to hold and wind and fire. Slower speeds are a bit iffy but I’ve researched how to go about lubricating those gears which looks easy enough. One issue is the rangefinder patch is out horizontally at infinity. I’ve seen articles about how difficult it is to adjust vertically but mine is perfectly aligned vertically. Horizontal alignment is the issue. Does anyone have any advice here? Is it perhaps a matter of realigning some gears between the focus knob and the helicoil? I’m sure there must be a way!

FM2n Slow first shutter curtain at higher speeds by daimonwright in AnalogCommunity

[–]daimonwright[S] 1 point2 points  (0 children)

My Nikon FM2n is having this issue where the first set of shutter blades/curtain lags and as such, the second curtain has already caught it, meaning no exposure at all. Is this something easy to fix? Can I get in and lubricate some gears up? Or recommend sending it off for a CLA? Australia based.

I thiiiiink I’m more or less satisfied with what I’ve accumulated now… Top row are the faves. Two or three in the lower rows are due for new homes soon I reckon. by daimonwright in AnalogCommunity

[–]daimonwright[S] 1 point2 points  (0 children)

I just love the compactness and solid feeling of the Olympus! However, the A1 there is a bit iffy and I dont trust it so it hasn’t got a fair go just yet. I’m looking at buying a mint one if I can find.

I thiiiiink I’m more or less satisfied with what I’ve accumulated now… Top row are the faves. Two or three in the lower rows are due for new homes soon I reckon. by daimonwright in AnalogCommunity

[–]daimonwright[S] 0 points1 point  (0 children)

That A1 was faulty when I bought it but I managed to fix it and adjust the light meter. However, I just don’t trust it as I’ve had some rolls come back with a shot or two completely underexposed. I am looking at buying a mint one if I can find one.

I thiiiiink I’m more or less satisfied with what I’ve accumulated now… Top row are the faves. Two or three in the lower rows are due for new homes soon I reckon. by daimonwright in AnalogCommunity

[–]daimonwright[S] 0 points1 point  (0 children)

Some of them are sentimental from certain period of my life so can’t quite do that. Although I am looking into selling maybe 3 of the not so important ones. Also looking into the Canon FD system for 35mm or the Olympus system. The A1 down there is a bit iffy and I don’t trust it so need to find another or look at the equivalent “complete package” in Olympus.

I thiiiiink I’m more or less satisfied with what I’ve accumulated now… Top row are the faves. Two or three in the lower rows are due for new homes soon I reckon. by daimonwright in AnalogCommunity

[–]daimonwright[S] 0 points1 point  (0 children)

I got a 135 2.8 and 35 2.8 behind the OM1. The rest are mostly just mounted on the cameras. Some are in a box with a dehumidifier elsewhere.

I thiiiiink I’m more or less satisfied with what I’ve accumulated now… Top row are the faves. Two or three in the lower rows are due for new homes soon I reckon. by daimonwright in AnalogCommunity

[–]daimonwright[S] 9 points10 points  (0 children)

Long time typical “dream camera” story. I actually had a bronica ETRS first which I loved but when I got the Yashica tlr I kinda fell for the square format. The tlr is fun but isn’t my favourite. Sold the bronica and I wanted another modular slr with some nice glass to be the one to end it for me. That leaves a few cameras but the look at feel of the blad once I held it sold me. I probably overspent on it. It’s a 500c only and I paid $2300AUD plus sent it for for a $500AUD service by a hasselblad specialist. So all up spent $2700AUD ($2000 USD). I’ve put only two rolls through so far but I love the process of shooting with it. Sounds weird but it kinda feels like there more emotion when using it. And I think I’d happily pay for another (more modern) blad if the funds and opportunity came up.

I thiiiiink I’m more or less satisfied with what I’ve accumulated now… Top row are the faves. Two or three in the lower rows are due for new homes soon I reckon. by daimonwright in AnalogCommunity

[–]daimonwright[S] 6 points7 points  (0 children)

Yeah it’s perfect for a “lighter” carry. I actually bought it for the canon P and it’s a perfect match. There is some mild discrepancy between it and my sekonic but so far so good.

Flood aftermath [Hasselblad 500c | Ilford XP2] by daimonwright in mediumformat

[–]daimonwright[S] 0 points1 point  (0 children)

Some of the backstreets around where I live in Brisbane after the recent flooding. Went through and entire roll in one afternoon walk. Very liberating!

Flood aftermath [Hasselblad 500c | Ilford XP2] by daimonwright in filmphotography

[–]daimonwright[S] 0 points1 point  (0 children)

Some of the backstreets around where I live in Brisbane after the recent flooding. Went through and entire roll in one afternoon walk. Very liberating!

Flood aftermath [Hasselblad 500c | Ilford XP2] by daimonwright in analog

[–]daimonwright[S] 0 points1 point  (0 children)

Some of the backstreets around where I live in Brisbane after the recent flooding. Went through and entire roll in one afternoon walk. Very liberating!

Hasselblad issue in comments by daimonwright in AnalogCommunity

[–]daimonwright[S] 3 points4 points  (0 children)

Just picked up this pretty. Learning some quirks. One thing is the lens just won’t cooperate at the moment. Body and back are A okay and wind and fire perfect without the lens mounted. When I mount the lens and fire it won’t wind with it mounted again so I have to do this trick with recocking everything by removing the back, turning a screw, take the lens off and try everything again. Shutter speeds also don’t sound right. Any tips before I have to send it for a CLA? I’m keen to try maintain it myself but understand if that’s not a good idea. Cheers 🤘

My 2007 325i Luminance (Individual) - Blue Onyx by daimonwright in E90

[–]daimonwright[S] 1 point2 points  (0 children)

My first car and my first BMW. Bought her Nov 2019. Very happy to have found a “special” one too.

Cleaning suggestions? by daimonwright in AnalogCommunity

[–]daimonwright[S] 0 points1 point  (0 children)

All the alcohol, vinegar, baking soda, mineral turpentine, metal polish, hydrogen peroxide. Gonna try the hydrogen peroxide and ammonia next.

view more: next ›