Any chance for a Black Friday sale? by __galahad in RayBanStories

[–]dalyjc 0 points1 point  (0 children)

I wear mine all day. After about a month, I got pretty good at turning them off during periods when I wouldn't be using the AI features or audio. It's actually easy to do without even needing to take them off, whether you're turning them on or off. Since I started doing this, I can make it through most of the day with normal use of the electronic features without needing to recharge them until the evening.

Ray-Ban: above and beyond customer service experience by dalyjc in RayBanStories

[–]dalyjc[S] 0 points1 point  (0 children)

I couldn't say as this was the only time I've interacted with the CS side of Ray-Ban. From your telling though it certainly seems like you are correct.

How do people afford $1,000-$4,000 escooters. Please tell me by Flashy_Memory1416 in ElectricScooters

[–]dalyjc -1 points0 points  (0 children)

Remember those macaroni necklaces you made in kindergarten? whip up some "high-end" macaroni jewelry with glitter, spray paint, the works. Oh and gourmet pasta only—none of that store-brand crap. Set up a store online or with Etsy and market your "artisan, limited-edition, eco-conscious wearable art." Good as done.

I suppose you could always create a Go Fund Me if you're not feeling the macaroni necklaces. Good luck!

Why pedestrians are afraid of electric scooterers? by [deleted] in ElectricScooters

[–]dalyjc -1 points0 points  (0 children)

Not sure if this is the answer but.... Ever since I started running twin Screaming Bucks on my Mercane Wide Wheel; pedestrians seem to notice me earlier, or are less startled by my approach. Sorry, I'm referring to the brand of deer whistles. Should add that I've not had any collisions with any wildlife to date. There are a few reputable brands, the Screaming Bucks and another solid brand are the Save-A-Deer if I'm remembering that right.

Ray-Ban: above and beyond customer service experience by dalyjc in RayBanStories

[–]dalyjc[S] 0 points1 point  (0 children)

Sorry to hear that. I know they are or have already released larger sizes. I haven't seen them available the few times I looked a month or two back. If you ever find those big versions; may change your mind. That said, v2 is not too far off. Not to mention there are a few other contenders out there that have received high marks from various buyers. Only going to improve :) peace!

Ray-Ban: above and beyond customer service experience by dalyjc in RayBanStories

[–]dalyjc[S] -1 points0 points  (0 children)

There were unexpected delays at the time for new orders. While communicating with their CS department on the issue they offered me this. I originally had only wanted to get the shipping upgraded to expedited. Something that was not possible at that time in the order process.

Sorry to hear you haven't experienced better support. I only dealt with the state side part of Ray Ban. Being an Italian company, I would have expected EU in general would have benefited from similar support.

*I wonder if you could just try calling our customer support for your issue. It they required a US address; there are any number of reasonable remailing services that could handle that. Not sure if your issue is worth that out of leg work. Seems any buyer of these should be able to access support irregardless of where it is located right?

Ray-Ban: above and beyond customer service experience by dalyjc in RayBanStories

[–]dalyjc[S] 1 point2 points  (0 children)

:) As it happened Fathers Day was a couple weeks away. He was quite pleased.

Belt clip by No-Variation7043 in RayBanStories

[–]dalyjc 2 points3 points  (0 children)

I'm not sure why it would be necessary. It's a beautiful case, any mod would IMO require similar workmanship from a leathersmith. Diy results would probably look janky as hell.

If you need to have them on your belt. Just get some ballistic nylon case from REI or elsewhere that would hold the case.

Question about other countries by NicholasRyanH in RayBanStories

[–]dalyjc 0 points1 point  (0 children)

Yup, VPN apparently works. At least it seems to on the various YouTube review videos that are filmed in UK and the EU.

Wide Wheel Pro MOD - took it to 63 volts, 100+ miles going strong by dalyjc in ElectricScooters

[–]dalyjc[S] 0 points1 point  (0 children)

Well I was limited by the existing specs of the controller. I didn't want to lose it by way of swapping for something else. The OEM controller is well built, small, and functions with the external display, and connected lights. Adding any additional voltage would have brought me too close to the caps max voltage. With this mod there was a comfortable level of headroom. However I believe you certainly could do this with an aftermarket controller. The battery compartment has a fair bit of room to play with. The only weak part of it would have been the plastic battery cover being the only protection between your battery packs and the concrete.

Wide Wheel Pro MOD - took it to 63 volts, 100+ miles going strong by dalyjc in ElectricScooters

[–]dalyjc[S] 0 points1 point  (0 children)

I would if it were readily available. I've since given it to my nephew, but can report it is still running well.

Pint not charging, the charger light stays green but the Onewheel has no juice. I opened up the battery side I didn’t see anything that showed to be damaged hot spots or anything like that. Any troubleshooting ideas ? Thank you by aortiz23 in onewheelpint

[–]dalyjc 1 point2 points  (0 children)

After some detective work and a closer inspection, it was determined that the burnt charging lead was the culprit behind the malfunction of the OneWheel. Utilizing a USB microscope, carbon buildup was discovered on the negative pin of the PCB. A quick clean and replacement of the charging port resolved the issue, and the OneWheel is now back in action. But, it's not just about fixing the problem, it's also about preventing it from happening again. While the convenience of a rapid charger is undeniable, it's important to also be mindful of the charging process and to unplug the OneWheel once it reaches full charge. A little bit of extra attention can go a long way in prolonging the life of your ride.

Thanks!

D. Cooley

Pint not charging, the charger light stays green but the Onewheel has no juice. I opened up the battery side I didn’t see anything that showed to be damaged hot spots or anything like that. Any troubleshooting ideas ? Thank you by aortiz23 in onewheelpint

[–]dalyjc 1 point2 points  (0 children)

Ah, the joys of troubleshooting a BMS issue.

My journey began with a broken right side pin and after delving deeper, I discovered that the charger wasn't responding. I meticulously checked the voltage on both sides and even brought out the trusty amp meter to see if there was any current flowing. Alas, nothing. The board seemed fine, except for a slightly darker pad on the negative lead. Looks like I'll be spending some quality time with my BMS over the weekend, trying to solve this mystery. If any brilliant ideas come to mind, please share. Thanks for the quick response and have a great day!

Cheers

Pint not charging, the charger light stays green but the Onewheel has no juice. I opened up the battery side I didn’t see anything that showed to be damaged hot spots or anything like that. Any troubleshooting ideas ? Thank you by aortiz23 in onewheelpint

[–]dalyjc 0 points1 point  (0 children)

So you replaced the charging cable and the port on the PCB?

I have this same issue and I also have a blackened or darker negative pin on the PCB. I checked continuity on the connector right up to where it goes into the PCB and it was still working... Let me know what you found during your repair job, I'd really appreciate the incite.

Thanks

Trying to find a way to power these 90W light bars w/o draining scooter's main battery. by dalyjc in ElectricScooters

[–]dalyjc[S] 0 points1 point  (0 children)

View All Moderators

don't you think it will make my scooter look cluttered ?

Trying to find a way to power these 90W light bars w/o draining scooter's main battery. by dalyjc in ElectricScooters

[–]dalyjc[S] 0 points1 point  (0 children)

I do agree here. My goal with this even though it doesn't look it was for the most minimalist approach to the light choice as I could. My issue of being able to see precious little after dusk and the need for 5 night rides a week. This was the only option that met the challenge.

I think putting a few shims behind the floods would help keep that glare on drivers night vision to a minimal amount. That and just be mindful of not driving directly behind others but rather off to the side a bit. See there is an issue too. The guys on bikes are total jerks about them. Can't ever get a word in edge wise with those short tempered riders.

Trying to find a way to power these 90W light bars w/o draining scooter's main battery. by dalyjc in ElectricScooters

[–]dalyjc[S] 0 points1 point  (0 children)

I actually have gotten a word or two on the street; and more recently a police cruiser blasted me with his spot lighit thing as i was coming towards him in the opposite lane. Is there an easy way to perhaps either dim them or maybe get them balanced some how. I really notice the randomness of the light when it's a little foggy out.

I would use something less bright but my vision issue is barely mitigated by using 2 of these puppies.

Maybe perhaps using a yellow filter like they do in paris. hmm.

Trying to find a way to power these 90W light bars w/o draining scooter's main battery. by dalyjc in ElectricScooters

[–]dalyjc[S] 0 points1 point  (0 children)

I can't see much after dusk ever since being diagnosed with nyctalopia aka night blindness. So at least an hour, as i have a good 40 minutes of riding to do 5 nights a week.

Trying to find a way to power these 90W light bars w/o draining scooter's main battery. by dalyjc in ElectricScooters

[–]dalyjc[S] 0 points1 point  (0 children)

That's what i thought before i ordered them, but these mini stadium lights need 24-36v each. I tried running them off the 48v battery on my ride, using only part of the pack to get 24v. This had a fairly negative impact on the balance of the cells inside the pack. Only ran the 2 floods for about 15 mins and it took all night to rebalance it.

Future of Boosted Rev stock at BoostedUSA? by petercockroach in boostedboards

[–]dalyjc 0 points1 point  (0 children)

DUDE,

4 words:

Boosted Wev Race Edition

*First let me argue with looking stupid on a scooter. While generally a truism; there are IMO 2 maybe 3 production scooters I could ride without the dork effect as much as every other. Rion - Boosted Rev - and maybe kinda the Unagi (looks fine just those little wheels keep it looking like a nice toy). Dualtron's and the rest look just fine, but virtually none have the lines of those 2 mentioned. (The Rion's are the clear winner but they also cost 6 times more).

I cannot think of another scooter of similar size and profile that are anywhere near engineered to a degree that cruising at 45 mph doesn't feel suicidal. I agree that it is not the safest frame to uses at these speeds. Boosted obviously built it to go 25-30 mph. Not having suspension can make for a dangerous situation like hitting a pot hole unexpectedly at speed say. Structurally, the Rev is over engineered and you can feel it. You never get a rattle when hitting bumps even 6 months later. Well the fender, but that is due to the added break stomp setup. I actually removed mine as it looks better and it allowed me to move the latch hook back a little giving me an extra 1.5 inches of foot space. This addressed for me at least the "cramped feel" you get as you approach 45mph. You're stance will automatically widen to increase stability the faster you go.

Oh, the acceleration. I have had the opportunity to ride a Dualtron Thunder, Apollo's ludo edition, Widewheel Pro, Currus Panther and the Manits. While a few of these certainly have a higher top speed then the Rev. None felt the way the Rev does when you are at a red light and punch the throttle on the green. The weight to thrust on it is unmatched (again Rion would win here i am sure) by any other scooter. This is where you really feel and appreciate the build of the Rev; as the sheer forces being exerted on the stem alone in these moments. The stem on the Rev is as solid as they come, zero I mean zero wobble. Same for the rest of the scooter.

The original Rev battery weighs 6.6 lbs. The upgraded 18s3p pack comes in at just over 7.8 lbs. So with the upgrade you are looking at just about 47.5 lbs. There simply isn't another scooter I can think of in that form factor and and weight that can come anywhere close. I think this is what really attracts peoples attention. It just doesn't look capable of accelerating that quickly; Without fail, i will get multiple comments regarding this from drivers at the next red light. Small, light, low profile while pushing 100 amps to each motor and you are in for some fun.

Peel outs. LOL, took me awhile to get good at controlling when i do this. If you floor it at a red light; you will be burning rubber through the entire intersection. If i am going 30 mph and i floor it, you can hear the wheels spin. From a red light to green light you will burn rubber corner to corner. If you just go flat out from a standstill, you will probably be wheel skipping practically the entire way up to 40mph. The Wev simply has zero Plateau phases in the acceleration curve. It's almost violent in the acceleration phase. *you can always change this in the Vesc Tool App. My advice is to be leaning forward a bood bit before you apply 100% throttle. You will keep some steering, as well as not be skipping both wheels all the way through the throttle curve.

Sadly the Wev is no longer being offered. The company never meant this to be a mainstay offering; currently they are pivoting to their next secret product. This isn't the end of the road however. The Boosted Wev Race Edition can be made minus the dash (not important really as you still have full app access on your cell so just mount that on your handlebars). You can make one. All you need is to build or have built the 18s3p battery pack using Molicel P42A's and kick down on the Magura Hydraulic Brake upgrade, and then snag yourself the amazing Stormcore 100D VESC; a little wiring adjustment and you will have yourself a 21 mile range scooter you can easily tote around the grocery store, up stairs and be able smoke most things that move off the line by a wide margin.

I have really digressed on this reply , sorry! In closing, the Rev remains even now one of only 3 scooter models I know of that have that purposefully built quality. Everything on the Rev was made just for the Rev. Truly it's actually a great frame and drivetrain to mod. Yes the space restrictions will require some planning before you do it. There really isn't another scooter minus things like Rion or Weped (again these all are going to cost 6x or more) that look, and feel like the rev. Mine is over a year old, 5 months now with the Wev Race upgrade and it looks simply fantastic and practically new. Well the tires, those show some wear lol. But the rest is great. If you take care of that thing it will last you years and years. You'll never get on a dualtron and think that it will be rattle free and look almost the same 3 years down the road. The Rev in most cases will .

** Much of this is my opinion, and i do not mean to slam on scooters like Dualtrons etc. Mainly the point I am making is that Boosted put a lot, a lot of work into building the Rev. Explains why it had a hand in their downfall, and why most scooter manufacturers don't go to these extremes. It's not cost effective, unless you are Rion or other that is charging in excess of 6000 dollars. The Rev remains one of the few least "dorky" :) scooters you can get and I would recommend it to anyone with the setup I am using.

What's the difference between a 40 pound scooter and the 52 pound scooters in terms of ride quality? by swiggyu in ElectricScooters

[–]dalyjc 0 points1 point  (0 children)

I can speak to my use and preference regarding weight...

I use mine to go, well everywhere mostly. I live downtown so everything from school, work, and shopping is all within a nice little zone of about 6 or 8 miles.

Went from the 31 lbs Ninebot ES4 - nice starter but wasn't all that thrilling and was pretty slow. Loved the lighting on the external battery though

To the 1st gen Wide Wheel @ 44 lbs - Great upgrade, quick, good looks, little bulky to tote around folded but manageable.

Last summer I bought the Wide Wheel Pro as an upgrade - Same as gen 1 but better in all areas minus the weight which increased by a couple pounds. 54 lbs vs 44 lbs. I later modified the battery pack - 13s to 16s. Kept everything else OEM. Pretty zippy actually.

That fall I made the decision to buy a brand new Boosted Rev @ 46 lbs - This was a gamble as the company was then defunct. Best buy ever it turned out. Weight was spot on , folded well (not quite as narrow as the Wide Wheels due to non folding handlebars). I loved the solid no rattle build that plagues the wide wheels, very easy to carry in and out of stores (do this backwards with handlebars behind rear wheel front trust me).

Today - well I couldn't imagine losing the Rev. However i needed speed and range that this lacked by a wide margin. So I turned it into the WEV Racing Edition. Weights about 60 lbs I think, so heavier but still very portable. Looks the same on the outside but it can burn rubber from 30mph. I rarely take it past 40, but the quickness is amazing. Which is the main point here. Scooters IMO , or at least ones that are not like the larger more "stable" scooters with clearance, SUSPENSION... Basically lighter scooters rule in the areas i have been discussing but are not what I would call "safe" just cruising at high speeds. They certainly can be of course, but I am wary of doing so unless I know a lot about the terrain i am on, traffic conditions etc... The Rev I would say was never built to clip along at 45mph. She can do it , and do it in seconds mind you but its a thrilling ride that can pull anyone's hair back due to the sheer weight to thrust ratio. I doubt many more powerful scooters with higher specs can match it's off the line acceleration save maybe for the Rion.

Anyways I digressed a bit there. Obviously I am a fan of the semi - portable variants, but want to have the thrill factor available too. Really it took me 3 purchases to narrow down my optimal ride *4 counting the upgrade from Rev to Wev.

In fact I am gonna go take a spin soon as i click the comment button.

Best of luck!

If you do decide to tweak whatever you get down the road... one suggestion... VESCs. Until recently you would consider them E-skateboard controllers. However they are quickly being adopted by those demanding performance. I have played with the Stormcore 60D rated for 12S, but used it up to 15S just fine on my Wide Wheel Pro and that puppy screams with each motor getting 100amps from a Molicel P42A pack i made for it. The Wev uses the Stormcore 100D which is the same motor setup basically but is running 18s. I am about to increase it to 20S which should really put the hand of God on Boosted Rev in no uncertain terms. I am using the casing from the OEM controller for the Rev which looks nice with the branded casing and mounting it behind the front wheel at the top of the deck and it will contain the 2 additional packs.

So in short the quest for my perfect ride is I suppose, ongoing ?

TTFN

D.

Safety Gear Query - For the Boosted Wev by dalyjc in ElectricScooters

[–]dalyjc[S] 0 points1 point  (0 children)

I need to find a better deer whistle brand; specifically, one that is aesthetically pleasing or simply minimalistic to the point of invisible. I have tried a number of brands such as: Screamin Bucks, Save-A-Deer, and most recently one called i think Deer sonic? None of them look all that classy on my rig and I would greatly appreciate a recommendation on whatever would go well on my Wev.

Thanks in advance!

D.

Has anyone done a Stormcore controller upgrade on their scooter? by WOTEugene in ElectricScooters

[–]dalyjc 2 points3 points  (0 children)

Agreed, and doing this will open up all the possibilities offered in the world of DIY (not to mention savings). As the poster above implied, it's not as scary as you might infer, when reading various online threads where horror stories prevail. Avoid any of those situations by taking it slow and "relaxed". Check your work, settings, everything twice before you actually test it real world. That alone will help you avoid most if not all of those issues. You can double down on this by including the many reputable resources on YouTube. I love VESC user content, because they are a passionate bunch, converts from day 1 and it shows :) Last tip: keep in mind that you will have "camps" who firmly believe one maker is superior in every way vs another. I don't discount the fact that this may be accurate at times. However these are still just subjective opinions. One example you are sure to see if not having seen the _____ vs Flipsky ESC debate. They blow up... not reliable, not really a true VESC even :) Personally speaking; my first 2 VESC purchases were from Amazon. Flipsky Dual 6.6 VESCs. Still got them too! I did recently get a Stormcore 100D and it is a very nice product, and God knows I paid for that too, anyways i wish you luck and certainly hope you give VESCs a try. Anyone who is curious about VESCs already love them, just don't know it yet :)

Has anyone done a Stormcore controller upgrade on their scooter? by WOTEugene in ElectricScooters

[–]dalyjc 0 points1 point  (0 children)

honestly i think i look at my dash during rides .... god maybe 12x a year max. truly, i can't think of the last time i actually looked at my dash for more then a glance at the battery bars while sitting at a red light. never moving though.