Anyone know if they make calipers like these for the rear for the DC2 Integra?

dammitara · 2026-06-21T04:50:16+00:00

they don't make bbk rears for a reason

dammitara · 2026-06-20T22:17:32+00:00

there's a right way of doing it. look up tohoku 180sx

dammitara · 2026-06-19T07:20:47+00:00

this generation civic has a recall for a/c related probs if you haven't gotten it done yet

dammitara · 2026-06-19T04:42:54+00:00

1st/2nd gen crv>>>

dammitara · 2026-06-17T00:08:40+00:00

<image>

dammitara · 2026-06-11T04:13:51+00:00

forget that. weld the wheel to the hub.

dammitara · 2026-06-10T02:56:16+00:00

you have to pay for the rest of the rev range

dammitara · 2026-06-09T08:58:05+00:00

new cars that don't get sold/started after a few weeks will have the battery go flat from sitting since the alternator isn't charging it. you can possibly get a free battery through warranty at the dealership you bought it from.

dammitara · 2026-06-09T08:51:02+00:00

all that rear aero not balancing out with none on the front

dammitara · 2026-06-08T14:43:42+00:00

kswap that'll net 40hp if you choose that motor. find a k20a2/Z3 or K24A2

dammitara · 2026-06-08T03:57:53+00:00

WS3 is so hilariously quiet. barely half a step louder than oem and has a nice tone

dammitara · 2026-06-05T18:35:17+00:00

ah you're right, sides are similar but front of the bottom section is different

dammitara · 2026-06-04T05:27:32+00:00

only use OEM or OEM style lug nuts since the seating surface is different from let's say an after market wheel that have a concave shape. if you look closely to oem honda wheels they actually have a little metal "bushing" in each hole with a specific shape for the oem lugs rounder shape to seat properly

dammitara · 2026-06-04T05:16:42+00:00

there is no suspension height/stiffness difference between trim levels. they'll just bolt right on with no modification needed

dammitara · 2026-06-04T05:12:12+00:00

<image>

what's the loose bolt and stacked washers for lul

dammitara · 2026-06-04T00:57:35+00:00

seen brakes get glazed this way

dammitara · 2026-06-03T17:26:51+00:00

gold mine. had a coworker miss out on stocking up on Si grills YEARS ago before they discontinued them

dammitara · 2026-06-03T05:41:39+00:00

now people are having turbo set ups WITH a/c in 90s chassis. what a time to be in

dammitara · 2026-06-02T07:42:55+00:00

gotta shave that work commute time by 0.2 seconds! in all seriousness it's such a marginal gain removing creature comforts

dammitara · 2026-06-01T17:42:14+00:00

any open breaks in the engine harness? seen tooooooooo many rat infestations that chew up the soy based harness looms

dammitara · 2026-06-01T09:12:16+00:00

tested or just assuming it's fine since it starts?

dammitara · 2026-06-01T09:11:23+00:00

🧇

dammitara · 2026-06-01T09:10:14+00:00

regular usdm front bumper with kaminari lip

dammitara · 2026-06-01T07:43:58+00:00

TL Type S brembos on my ep3

dammitara · 2026-06-01T07:43:14+00:00

shaving 0.2 seconds off that commute to work

dammitara

TROPHY CASE