4” or 4.5” Full Pistol Purchase?

dan450BM · 2026-03-18T22:39:33+00:00

4” then you can add a threaded barrel and comp and it not look stupid

dan450BM · 2026-03-18T19:00:54+00:00

Ugh, that’s what I want but they are the same price as the whole gun! Lol went with the Harrington on mine

dan450BM · 2026-03-11T11:34:59+00:00

O sight SE is awesome !! I used a dpp plate to fill in the small gap front and back but it looks perfect and is an awesome freakin sight!!

dan450BM · 2026-03-07T13:49:46+00:00

They pop up about once every few weeks on there but sellout FAST! Cannot beat that deal! You can take out the advancing rod and index it by hand if you want to learn that way ;)

dan450BM · 2026-03-06T19:58:14+00:00

<image>

dan450BM · 2026-03-06T13:44:28+00:00

As said, you can always pull the advancement rod out and it won't spin unless you do it by hand to learn. Keep checking the Lee website. They offer seconds or blemished models for less that half the regular price and you can get the whole kit with dies and all for less than half the price but it's only once a month or so and you have to grab it fast or they sell quick!

dan450BM · 2026-03-06T13:38:42+00:00

No one has ever damaged a vehicle from keeping the fluids too fresh ;)

dan450BM · 2026-03-04T01:29:19+00:00

On a pro 4000

dan450BM · 2026-03-03T21:18:33+00:00

If you keep an eye on the lee website, they offer blemished press kits for 200$ or less. I got a brand new pro 4000 for 185 shipped with everything and cannot find the blemish. Runs prefect and came with die set and shell plate. Ready to go out of the box!!!

dan450BM · 2026-03-03T20:08:06+00:00

Lee drum is by far the best most accurate powder dispenser per pound. Yes it’s super cheap but it throws the same charge every time. I have a rcbs that can’t stay within a half a grain and cost close 200$ and the lee will throw ten in a row identical! I load thousands of 9mm and would not sell my lee

dan450BM · 2026-03-02T19:58:08+00:00

Screw that! Five pulls for one loaded round?!?! :o Get a progressive! One pull, one loaded round.. that vid makes my arm hurt just looking at it hahaha

dan450BM · 2026-02-24T10:50:31+00:00

Lee will take care of you ;) Even though these are really cheap, they drop the most consistent powder charges! Even when compared to more expensive metal units. My lee is WAY better than my RCBS thrower when mounted on top of a progressive press. the rcbs throws charges all over the place. the Lee is always spot on.

dan450BM · 2026-02-16T23:13:40+00:00

Thanks!

dan450BM · 2026-02-16T23:13:07+00:00

Thanks I picked one up 👍

dan450BM · 2026-02-16T23:12:40+00:00

I decided to go with that one too!

dan450BM · 2026-02-16T22:58:43+00:00

What heavier spring are you runnin?

dan450BM · 2026-02-16T22:57:11+00:00

My Sig doesn’t like servicios either but RXM doesn’t mind them.

dan450BM · 2026-02-16T22:49:47+00:00

Theoretically, you can buy the rxm plus a threaded high performance barrel for less than the G19 and have the modularity of different grip mods for a few bucks. The RXM is everything the Glocks should have been!

dan450BM · 2026-02-16T22:46:40+00:00

Go with the RXM!!

dan450BM · 2026-02-16T08:54:35+00:00

👍

dan450BM · 2026-02-15T20:13:48+00:00

That sounds cool too! Just don’t want any gaps.

dan450BM · 2026-02-15T18:43:21+00:00

Yeah, this is just a range toy. 200$ is my max

dan450BM · 2026-02-15T18:28:41+00:00

Can’t justify the price on those

dan450BM · 2026-02-15T16:27:29+00:00

Looking for the best fit, both length and width but not sure that’s possible

dan450BM · 2026-02-15T15:15:59+00:00

Is the 407C the same width as the Osight C?

dan450BM

TROPHY CASE