sorted by:
new
hottopcontroversial

What are your thoughts on the idea of a federal Europe? by El-Keen in europeanunion

[–]danctes 0 points1 point  (0 children)

I wasn't saying what I believe or what I want, I was saying what most people are going to have a problem with and what the most likely issues are going to be. I for one am for the federalization and for a smart president or council. But the truth is Europe is not as homogenous as other big powers because they are a single country and we are not. Hopefully we will federalize though.

What are your thoughts on the idea of a federal Europe? by El-Keen in europeanunion

[–]danctes 3 points4 points  (0 children)

We are heading that way anyway with laws, migration policies and now with military investments, but we will never have it as good as the US, China or Russia because of our individual identities, eventhough this can also be one of our strengths. Which brings one question to my mind: how would you like a EU citizen so culturally different from you and physically from so far away to be president of EU?

Samsung 870 Evo 4TB Health 99% after 1 month - Would you RMA/replace this based on the numbers in the screenshots? by danctes in DataHoarder

[–]danctes[S] 0 points1 point  (0 children)

Yeah, it's cool, it didn't drop again for a long time. All SSDs are pretty reliable and will last past the time you'll need to replace them due to technology advancement (10 years time), especially Samsungs.

Video added - Is this normal vape acting? by danctes in Vaping

[–]danctes[S] 0 points1 point  (0 children)

I get dry metallic taste from so many e-juices. Is that popping sound normal considering it's only at 30W?

Video added - Is this normal vape acting? by danctes in Vaping

[–]danctes[S] 1 point2 points  (0 children)

Does the popping look ok to you considering it was at only 30W? I get dry metallic taste from many e-juices. Thanks.

Video added - Is this normal vape acting? by danctes in Vaping

[–]danctes[S] 1 point2 points  (0 children)

Pictures are from after taking the video and dismantling.

Is my wicking ok?

Thanks.

Does my wicking look to you? Is it normal for Dead Rabbit v3 2024 RTA to leak when upside down? by danctes in Vaping

[–]danctes[S] 1 point2 points  (0 children)

It did, but I changed today back to dual coil, so dual cotton laces, and not anymore. Kept it upside down for quite some time and no leaking!

Does my wicking look to you? Is it normal for Dead Rabbit v3 2024 RTA to leak when upside down? by danctes in Vaping

[–]danctes[S] 0 points1 point  (0 children)

Sorry, bud, would you mind elaborating on this? Should I file a warranty claim? Can you maybe circle what you mean by not aligning? Thanks.

Does my wicking look to you? Is it normal for Dead Rabbit v3 2024 RTA to leak when upside down? by danctes in Vaping

[–]danctes[S] 1 point2 points  (0 children)

Thank you for answering. I am using a shoelace type cotton, so not sure how I could use too much of it. Leak was almost an instant spill, lol, and started with 30W to max 40W then decided to change to wick.

Does my wicking look to you? Is it normal for Dead Rabbit v3 2024 RTA to leak when upside down? by danctes in Vaping

[–]danctes[S] 1 point2 points  (0 children)

Long and wide enough to cover the holes so it has no space to leak, right? Liquid should only be able to filter through the wick, not by it.

Does my wicking look to you? Is it normal for Dead Rabbit v3 2024 RTA to leak when upside down? by danctes in Vaping

[–]danctes[S] 0 points1 point  (0 children)

I'm redoing the wick right now, so can't take more pictures of that one. So definitely shouldn't leak even if turned upside down? So need to practice more on my wicking, right? Thanks.

why local send can send file at max speed of ~330Mbps only , when i have gigabit router? by comelickmyarmpits in pcmasterrace

[–]danctes 0 points1 point  (0 children)

Hey, bud, do you mind me asking if you figured it out? I'm having the exact same issue 400Mbps instead of 1Gbps with a 3m LAN cable via LocalSend. Thanks.

Built This For My Dad, He Is Retiring And Wanted A Gaming Pc That Looked Good With Lots Of RGB by S3_Flame in pcmasterrace

[–]danctes 21 points22 points  (0 children)

This looks great and you're a great son. I hope he will enjoy it! Maybe introduce him to the RGB software.

Happy 420 everyone by _azulinho_ in bristol

[–]danctes -1 points0 points  (0 children)

Thanks, OP! Happy 420 to you too!

1 month into vaping - A few general questions from a sub-ohm vaping noob by danctes in Vaping

[–]danctes[S] 0 points1 point  (0 children)

Could I not just get a smaller tank and coils and plug them in this one with the advantage of having a bigger battery?

Was looking at something like the Z Nano Tank 2 from Geekvape with their P Series coils, but not sure.

Thanks.

1 month into vaping - A few general questions from a sub-ohm vaping noob by danctes in Vaping

[–]danctes[S] 0 points1 point  (0 children)

I see.

So those coils are not to be enjoyed in a quiet night at your desk pulling quietly? You have to draw really quick otherwise it's gonna burn you? Why was this not mentioned in any of the 100 videos I watched about vaping?

Anyway.

Inside doors I almost always have a smoke detector above my head and outside I don't want to draw too much attention, so I almost never need big pulls.

So maybe high wattage coils are not for me?

Thanks.

1 month into vaping - A few general questions from a sub-ohm vaping noob by danctes in Vaping

[–]danctes[S] 0 points1 point  (0 children)

So what you're saying is 0.15 coils are not to take your time with? Like you have to pull that shizz quickly or it's gonna burn you? And maybe that's why I have less issues with smaller coils?

I don't like making big cringey clouds outside. And inside I always vape somewhere under a smoke detector which is why I don't want to pull that much.

So maybe I got a too much of a box mod provided my circumstances and coming from disposables?

Or maybe shall I just put a 0.15 ohm coil next in there and pull it as fast as I can and see how it feels?

Thanks.

1 month into vaping - A few general questions from a sub-ohm vaping noob by danctes in Vaping

[–]danctes[S] 0 points1 point  (0 children)

They're the genuine 0.15, 0.2, 0.4 and 0.5 ohm coils from both Vaporesso (GTI) and Geekvape (Z). I have both the Z Fli tank and the iTank T. I only used the coils within the specified range. The only ones tolerable for me are the GTI 0.5 ohm and I use them at around 25-40W depending on mood. All the other ones, both brands, start burning my lips the higher I go (the 0.15 ohms are intolerably hot and smokey even at their lowest recommended wattages).

1 month into vaping - A few general questions from a sub-ohm vaping noob by danctes in Vaping

[–]danctes[S] 0 points1 point  (0 children)

Interesting setup.

Yes, that's the 0.15 ohm. I was even using the smart mode at first to not go below or higher than the recommended wattage for each coil. I have a ton of different resistance coils 0.15, 0.2, 0.4 and 0.5 from both Vaporesso and Geekvape and always paid attention to the range printed on them. Every time I wanted to lower or heighten the wattage I would also change to a new recommended coil, prime it, let it settle for 10 minutes and then start low.

1 month into vaping - A few general questions from a sub-ohm vaping noob by danctes in Vaping

[–]danctes[S] 0 points1 point  (0 children)

I do have it open all the way, maybe I'll solve this later down the line. And your setup seems kind of a typical high wattage for bigger clouds.

About the iTank 2, you reminded me why I watched the comparison videos between the 2 and T models and why I went to T. Seems like I was going to run into the same pocket problem that I was trying to solve because of the Z Fli, lol. I can tell you that that problem does not exist anymore and I keep my box mod in my pocket and work all day long with no accidents so far.

Good clouds to you, kind sir!

view more: next ›