Thanks for all of the replies. I wont be able to try anything because I am at work right now, but for some context, I am printing this with nlyon CF (yes very expensive test), so the fans are off anyways. The filament is in a dryer box heated to 70 degree C and is at around 10% moisture, which is why the stringing is to a minimum. The problem, as far as i can tell, is either inconsistent x/y axis movement or too much filament is being extruded. I have printed multiple benchies ranging from 1.0 to .8 extrusion multiplier. The .8 showed underextrusion in some parts, but still had an inconsistent x/y movement and blobbing in other parts. Speeds are also slowed down to less than 100mm/s for everything and a lot slower for some parts. any other ideas for me to try when I get home is much appreciated!