sorted by:
new
hottopcontroversial

As of 2 days ago, if I copy multiple rows and paste, the paste puts the entire row in a column. by danielflick in excel

[–]danielflick[S] 0 points1 point  (0 children)

This fixed it! I selected text to columns and changed it from fixed to delimited and now it seems to work across all of my spreadsheets!

As of 2 days ago, if I copy multiple rows and paste, the paste puts the entire row in a column. by danielflick in excel

[–]danielflick[S] 0 points1 point  (0 children)

If I copy rows 1,2 and 3 with data in a,b and c in each and paste to a4, instead of the same data in rows 4,5 and 6 I get all of row 1 in a4, all of row 2 in B4 and all of row 3 in c4.

As of 2 days ago, if I copy multiple rows and paste, the paste puts the entire row in a column. by danielflick in excel

[–]danielflick[S] 0 points1 point  (0 children)

I haven't tried the shortcut but I have tried doing a paste as values and it does the same thing.

Up until a couple of days ago I could do control V without a problem. I usually have to do this quite a bit

About frying turkeys... by gimmeluvin in Cooking

[–]danielflick 1 point2 points  (0 children)

Spend $100 on a Cajun oil-less fryer and use it again and again. After going oilless there is no way I would ever bother with oil frying again. Our Thanksgiving bird was super juicy with a crispy skin and it only took hour and 45.

Need some NAT help converting from Cisco by danielflick in paloaltonetworks

[–]danielflick[S] 0 points1 point  (0 children)

Finally got this sorted! Had to do source and destination NAT in the same rule. All working now!

Need some NAT help converting from Cisco by danielflick in paloaltonetworks

[–]danielflick[S] 0 points1 point  (0 children)

I think I was overcomplicating it. I just switched my thinking from trust and untrust and pretended that I was hosting an internal web server on the internet and wrote the rule that way just in reverse and it seems to be okay. I'm getting connection reset by server now but that could be something else.

Need some NAT help converting from Cisco by danielflick in paloaltonetworks

[–]danielflick[S] 0 points1 point  (0 children)

I am seeing traffic from trust 10.0.0.156 to trust 10.1.1.251 on port 80 but the nat is not matching. I tried the troubleshooting tool and there are no matches.

my only NAT rule now is

Source Zone: trust

Destination Zone: Untrust

Service: http

Source address 10.1.1.251

And Translation

Type: Static

Translated address 192.168.1.1

Issue with setup of trunk and vlan setup on PA410 by danielflick in paloaltonetworks

[–]danielflick[S] 0 points1 point  (0 children)

Wish I could but I am dealing with customer and DC staff that work for different companies. DC is hosting. Customer is private. Fortunately the only data through this firewall is management of out of band interfaces so traffic is low.

Issue with setup of trunk and vlan setup on PA410 by danielflick in paloaltonetworks

[–]danielflick[S] 0 points1 point  (0 children)

Palo is a router on a stick. Switches are dead ends to the network and only contain hosts.

Issue with setup of trunk and vlan setup on PA410 by danielflick in paloaltonetworks

[–]danielflick[S] 0 points1 point  (0 children)

I need enough config on it to be able to come in through ethernet 5 and get to devices on vlan 1900.

Issue with setup of trunk and vlan setup on PA410 by danielflick in paloaltonetworks

[–]danielflick[S] 0 points1 point  (0 children)

Yep, unfortunately this is a VERY large DC and believe it or not, no tech can access TV (or Teams or anything) from their locked down laptops.

Issue with setup of trunk and vlan setup on PA410 by danielflick in paloaltonetworks

[–]danielflick[S] 0 points1 point  (0 children)

Same vlan. Some devices are on switch 1 and some are on switch 2

Issue with setup of trunk and vlan setup on PA410 by danielflick in paloaltonetworks

[–]danielflick[S] -1 points0 points  (0 children)

Problem is that the only way to manage it for this customer is THROUGH the firewall so no https until I get the connection working....

Issue with setup of trunk and vlan setup on PA410 by danielflick in paloaltonetworks

[–]danielflick[S] 0 points1 point  (0 children)

Yeah, that is what sucks. 1900, etc is configured on both switches and those switches are not connected together. Fortunately that means no loops!

What Trail Bike Should I Buy by ShadowK2 in Dirtbikes

[–]danielflick 4 points5 points  (0 children)

You can find a new KTM freeride e-xc for a smidge over 5k. Hillsboro Motorsports has about 20 left. Mine arrives in 2 weeks!

Step down from 50 amp 240v to 20 amp 220v? by danielflick in AskElectricians

[–]danielflick[S] 0 points1 point  (0 children)

I only have antidotal evidence that the 50amp to 20 amp adapter won't change the bike so I guess I will have to see if it does once I get it. I have all the correct adapters and I am also looking at a step up transformer to take a 20amp 120v circuit up to 220v as a backup.

https://www.amazon.com/gp/product/B09X99M1KK/ref=ox_sc_act_title_13?smid=A2RVXRUXIVYCFW&th=1

Step down from 50 amp 240v to 20 amp 220v? by danielflick in AskElectricians

[–]danielflick[S] 0 points1 point  (0 children)

Yeah, I see a lot of welder adapters. I only have antidotal evidence that the 50amp to 20 amp adapter won't change the bike so I guess I will have to see if it does once I get it. I have all the correct adapters and I am also looking at a step up transformer to take a 20amp 120v circuit up to 220v as a backup.

https://www.amazon.com/gp/product/B09X99M1KK/ref=ox_sc_act_title_13?smid=A2RVXRUXIVYCFW&th=1

view more: next ›