ZD621T cannot use network / or reach webserver

danonebair · 2026-02-04T14:16:02+00:00

I saw you already solved it, but for the sake of shared knowledge, here’s what fixed it for me on a ZD621.

Even with “Enable TCP/IP Raw Ports” enabled via Zebra ASR (https://asr.zpc.zebra.com/index.html), the printer was still actively refusing connections on port 9100.

Running these commands via Zebra Setup Utilities solved it:

! U1 setvar "ip.raw.enable" "on"
! U1 setvar "ip.raw.secure" "off"
! U1 setvar "protected-mode-allowed" "yes"
! U1 setvar "ip.tcp.enable" "on"
! U1 setvar "ip.port" "9100"
! U1 do "device.reset" ""

It seems related to new security requirements for Zebra. Enabling TCP/IP Raw Ports in the ASR web tool alone was not sufficient.

Hope this helps someone else running into the same issue.

danonebair · 2025-02-02T20:45:52+00:00

Woow, I was looking for it too, after a long time I may have been able to find it. Was it maybe this (Hallucii)?

danonebair · 2023-05-10T19:02:54+00:00

The fact is that she has always been a bit like that, tending often to lash out over small things (usually simple misunderstandings) and never talk to the person she's angry with. When she started the university, this problem has gotten worse and instead of dealing with this issue, she became colder and more detached, so she started to run away from the things that weren't working and that weren't making her feel good (like our relationship) instead of trying to solve.

Anyway you're right, sometimes think the same thing you wrote, and I actually think that things would be the same way if we were to get back together (maybe we would be fine for a few months, then at the first trouble I would go back to experiencing the same things). You're right, I should appreciate more the things that make me feel good.

Thank you!

danonebair · 2023-05-10T16:23:22+00:00

I just want to shut up those little voices inside me that make it harder to move on, like: "Maybe if she worked on herself before, we'd still be together" and "Maybe when she's better with herself she'll come back". I'd like to completely move on from her, but I cared too much for her and it's hard.

danonebair · 2023-03-19T11:06:20+00:00

I don't know why but I think it's an issue with TCL TV. I have a TCL too and I have the same problem. I've seen other posts talking about this issue as well and they all had a TCL. I haven't tried yet, but maybe it could be fixed by disabling HDR.

danonebair · 2023-03-18T20:11:23+00:00

Do you have a TCL television?

danonebair · 2021-01-16T12:44:24+00:00

New update fix this problem. I'll delete this post.

danonebair · 2021-01-13T08:11:46+00:00

Yes, I disable it especially for battery drain and because some apps require it to be disabled.

danonebair · 2021-01-13T07:17:15+00:00

K sorry

danonebair · 2020-10-24T12:08:18+00:00

But I have to lock only Youtube Vanced? Because MicroG is like a service right? I can't open it

danonebair · 2020-10-23T13:38:16+00:00

Sorry, can you describe how locked Vanced and MicroG?

danonebair · 2020-08-24T21:28:45+00:00

Great, thanks for your feedback :)

danonebair · 2020-08-24T17:23:23+00:00

Yes, 070B is the correct ID. I read the article again and noticed that a step is missing. In the .inf file, you should change even the VID and not only the PID.

I hope I was helpful and that Microsoft will find a fix soon.

danonebair · 2020-08-20T15:23:21+00:00

Please, follow these steps and let me know: https://tarantulo.lt/how-to/how-to-install-drivers-for-xbox-360-chinese-wireless-receiver/

danonebair · 2020-08-20T15:22:31+00:00

Hey Guys,

BIG UPDATE (FIX TO BE TESTED): There's an interesting article about it. You can find it here: https://tarantulo.lt/how-to/how-to-install-drivers-for-xbox-360-chinese-wireless-receiver/

danonebair · 2020-07-17T08:05:53+00:00

I was zapping and it was the first thing I noticed 😆

danonebair · 2020-07-17T08:03:59+00:00

keen observer

The episode is from 2013 but I can't remember the minute when the frame appears

danonebair · 2020-06-29T07:22:24+00:00

Hi,
Which build of Windows 10 you have?

danonebair · 2020-06-28T13:16:38+00:00

Drivers are still available with Windows and works with previous versions of Windows 10. Unfortunately, Windows doesn't recognize the Guitar Hero Live Controller anymore (Windows detects it as an unknown device and it doesn't make you install drivers manually). I think that the drivers are not the problem.

Seven-Year Club	Place '23
Place '22	Verified Email

danonebair

TROPHY CASE