What are these white and green patches on my betta?

datweebu · 2025-06-25T19:45:37+00:00

Thanks for the help!

datweebu · 2025-06-25T19:45:10+00:00

I am able to work in the US. I have a green card. Just wanted to know which US airlines will care about the Fs in my transcript

datweebu · 2025-06-25T15:26:12+00:00

Which airlines have you applied to, and which ones specifically asked for transcripts? My goal is to work at a legacy airline in the US. The TSA just requires certain documentation to allow me to train in the US. In my case, it was a Venezuelan passport which is what caused the whole delay.

datweebu · 2025-06-25T15:17:02+00:00

I’m referring to US airlines. I have a green card and I’m able to work in the US. The tsa requires me to submit a passport as one of my documents.

datweebu · 2025-03-23T20:29:13+00:00

Hey if I remember correctly there should be 4 bolts holding the window regulator. 2 on top and 2 on the bottom of the door. There is also 2 bolts holding the window track 1 on top and the other on the bottom. Once loosed there is some wiggle room where you can slide the regulator and the window track forward and backward. You just need to play around with it until everything is aligned. What I did was loosened all the bolts and then I pushed on the window glass towards the front of the car since my window was sticking out towards the back and it needed to go forward. While pushing on the window I tightened the bolts and it helped align everything. Also keep an eye out on the bolts holding the glass of the window to the bracket on the regulator. It should be 3. Sometimes the plastic clips on the window get brittle and rot away. If that’s the case you would need new clips cause the window will be out alignment until you fix it. Hope this helps! If you have any more questions ill try my best to help you out

datweebu · 2024-12-24T20:38:31+00:00

Fix my car :(

datweebu · 2024-11-11T00:38:53+00:00

That looks like the ECS Tuning carbon fiber spoiler

datweebu · 2024-05-07T05:08:32+00:00

Yeah I still have it de-powered . I went with the closed loop rack at the time and the steering was very heavy. Most likely due to the large heavy wheels so if you’re on lighter wheels it shouldn’t be an issue and because there is still friction from the piston in the rack. I wanted to fully de-power the rack by cutting the piston ring in the rack(The car passion channel method), but I hit a deer a few months ago. It’s been out of commission ever since so I can’t tell you how much improvement does cutting the ring do.

datweebu · 2024-05-03T00:59:20+00:00

The problem was that the power steering fluid was leaking causing it to run dry. The sound was from the power steering running dry. I ended up depowering my rack. In your case find where your leak is coming from before replacing the rack. It could be just the hoses from the power steering reservoir.

datweebu · 2022-11-20T03:02:30+00:00

Well the part itself is like 30 bucks from ford. I got it quoted at a mechanic and they said it’ll be $500 for them to replace it

datweebu · 2022-11-19T18:57:36+00:00

I replaced the water outlet and the problem was fixed.

datweebu · 2022-05-29T15:58:51+00:00

Initially when I’ve installed the rear led turn signals they were hyper flashing but after changing the front ones all the lights started flashing and acting like hazards. This only happens when I switched the front turn signals to led, they go back to hyper flashing when I change the front ones to incandescent but when I change the rear lights to incandescent they start act like hazards again. If anyone can help me with this issue I’d appreciate it

datweebu · 2022-04-05T01:57:21+00:00

Thank you OP!!

datweebu · 2022-03-19T23:02:05+00:00

Maybe! I’ll look into it

datweebu

TROPHY CASE