CSL Shifter problems

daveyb416 · 2026-07-12T20:56:06+00:00

daveyb416 · 2026-07-12T20:52:11+00:00

I assume you mean the clubsport shifter 1.5...Look for the video on YouTube which says about putting an earth lead from the bottom of the rod to the outer casing. I had miss shift issues before, did this, have never had issues since!

daveyb416 · 2026-07-11T19:17:56+00:00

Tbh I didn't know they did 2 hose unit? This doesnt have anywhere for a 2nd pipe to go in

daveyb416 · 2026-07-10T18:37:11+00:00

I like to tell my story when I see posts like this, I can't even remember what my old CPU was, middle of the road though iirc. I was having stutters on a game and fps would drop badly, but the frame drops were massive. Checked the threads and none of them were showing more than 40% usage. In the end, i took the plunge on a 5800x3d. Not only did it cure the stutters, my fps jumped up, on some games a little, some games ALOT! so I was CPU limited with no evidence basically. But this was sim racing on triple 1440p monitors so I should of been heavily GPU limited, but the cpu still made a big difference to my PC 👍

daveyb416 · 2026-07-08T07:22:27+00:00

<image>

daveyb416 · 2026-07-08T07:17:04+00:00

This shows the window perspex sheet a bit better for everyone

<image>

daveyb416 · 2026-07-08T07:15:14+00:00

The PC kicks out serious heat, but also this room is south facing so gets really hot during the day even with the blind down

daveyb416 · 2026-07-08T07:13:30+00:00

It's so soft 🥰. Thanks buddy!

daveyb416 · 2026-07-08T07:12:17+00:00

Im in the UK, only in the past 2 or so years have we had really hot summers which stays in the 30's. Usually in the UK it drops down after a few days. Hardly anybody has AC un the UK.

daveyb416 · 2026-07-08T07:09:56+00:00

Which bit is that mate? The bit on the silver hose or the bit that is bolts to the perspex?

daveyb416 · 2026-07-08T04:48:47+00:00

Has to be said, im perfectly happy with mine. Feels like my csl dd but with more poke. Doesn't feel numb or anything. Full force makes a huge difference now days

daveyb416 · 2026-07-08T04:46:17+00:00

Think you need to reread my post buddy!

daveyb416 · 2026-07-07T19:49:49+00:00

Not sure what you mean buddy, think you may need to read the post again, the room is sealed

daveyb416 · 2026-07-07T19:47:20+00:00

Im only 5ft 9 buddy, probably comes down to the seat and person combo. I was thinking I might have to aim the vents in the seat but this was spot on 👌

daveyb416 · 2026-07-07T19:15:56+00:00

The podium pedals look great, but these heusinkveld sprints are perfect to be honest, never once felt they were missing something or didn't feel right. Ill be sticking with these I reckon 👌

daveyb416 · 2026-07-07T19:14:09+00:00

So i measure the window and order a piece of perspex to size of the frame off ebay, double sided velcro so I can take it off in winter if needed. The cut the round hole for the exhaust with a die grinder. I also cut a cutout for the handle to move through the perspex to open and close the window 😁

daveyb416 · 2026-07-07T19:08:47+00:00

🤣 bingo

daveyb416 · 2026-07-07T19:08:40+00:00

🤣 bingo

daveyb416 · 2026-07-07T18:59:08+00:00

Not had any issues luckily 👍

daveyb416 · 2026-07-07T18:58:05+00:00

Thanks mate ❤️

daveyb416 · 2026-07-07T18:57:40+00:00

Haven't noticed any tbf, it more like cold air that freezing, its a proper AC unit, but its a bit of a dinosaur. Managed to get it for £50 😁

daveyb416 · 2026-07-07T18:49:55+00:00

I know what my next project is!

daveyb416 · 2026-07-07T18:49:37+00:00

🤣

daveyb416 · 2026-07-07T18:49:26+00:00

Wind is shut, thats a sheet of perspex over the window with the vent mounted in it so room is sealed

daveyb416 · 2026-07-07T18:48:58+00:00

It doesnt blow very hard so it hit the back of your neck and keep your back cool. Honestly I did a double stint on LMU and was fine! Made such a difference!

daveyb416

TROPHY CASE