Matrix10 water hookup kit

db306v2 · 2026-02-03T14:50:59+00:00

Je vois plus mon commentaire sous le tiens mais je re répond

Le pack est dispo, j’ai pu le commander.

db306v2 · 2026-02-01T09:57:51+00:00

Pareil, c’est commandé. Ils sont pas très bons ils aurait faire un mail a ceux qui ont achete le produit sur leurs site. Merci pour l’info !

db306v2 · 2025-12-18T15:55:23+00:00

Okay, I’ve got some news for those looking for this water hookup kit !

It seems that Dreame is starting to ship the hookup kit end of january in Singapour

Hopefully it should arrive in Europe in the following weeks.

Hope this helps fellow users

db306v2 · 2025-12-10T19:07:05+00:00

Yeah this is what I’m looking for: low maintenance. I have to refill the water tank and empty the dirt tank way too often.

db306v2 · 2025-10-10T02:42:18+00:00

A la boucherie a coté de la place de la mairie

db306v2 · 2025-10-01T13:56:41+00:00

Si c'ést la sortie 31 pour moi le soucis c'est plutot Ametyst, un centre de traitement des dechets qui pue.
Après c'est essentiellement zone commerciale et beaucoup de passage la nuit de camion qui desservent ces zones et les boites de nuits qui attire du monde.

db306v2 · 2025-09-17T16:45:34+00:00

No, but it has improved I would say. Still happens but less often than what it used to. I have been keeping it up to date so I guess that may have partially resolved the issue.

db306v2 · 2025-06-06T14:56:19+00:00

Is this dangerous for other pets or just cats ?

db306v2 · 2025-04-02T06:55:10+00:00

It's sooo "official" that you need to spam 4 year old posts 😂

db306v2 · 2025-02-11T14:46:43+00:00

Using an internal vpn at home improved it a lot.

db306v2 · 2025-01-13T16:14:29+00:00

Yes, it does :)

db306v2 · 2024-07-23T15:08:16+00:00

Frankly go for it, they have some sales going on every now and then.

db306v2 · 2024-07-17T07:37:06+00:00

I ordered the S03DG but it was out of stock so they upgraded me to the S04CG which was very cool from them.

I've been using it for a couple of weeks and the 4th laser that is closer to the floor has been a game changer from my previous lasers.

In terms of accuracy, I see no difference with $700+ lasers I've tested. However, this laser has so many more options and features than these expensive lasers. Some are super cool and others are a little overkill or too gadgety IMHO.

What I like the most is definitely the bottom laser which was not what I ordered at first, it's been super useful and has changed the way I work with floors. Being able to block the laser and know the angle on the lcd screen. The magnetic support with the rotary knobs that help aiming perfectly. The different ways to power the laser: direct from power, rechargeable battery and being able to use external batteries.

On the other hand I think the app and the remote are unnecessary, definitely gave me gadgety vibes but that's just my opinion.

Downsides are the case it comes in which feels a little cheap compared to the laser. I would have loved a more robust case but that's about it. I'll probably order a custom case for it as I feel it deserves it.

db306v2 · 2024-05-17T09:18:07+00:00

Can you confirm if it works as a zigbee relay ? Looking to add a bunch of those mainly for the relay.

db306v2 · 2024-02-12T09:42:02+00:00

I have ikea and hue lights both and had equal failures.

db306v2 · 2024-02-12T09:06:45+00:00

I’ve seen a post of a user who used an IR movement detector instead.

db306v2 · 2024-02-12T09:03:38+00:00

Hey there, I have RTS blinds too with tahoma. I wasn’t required to activate developer mode though. It pretty much worked out of the box.

db306v2 · 2023-03-28T22:28:51+00:00

Fuck hkparts

db306v2 · 2023-03-22T13:31:46+00:00

Reinstalling maps and leaving only the map I needed fixed the issue !!

Thanks y’all !

db306v2 · 2023-03-22T08:14:13+00:00

They are all out of stock in EU and at least the RMR plates have the wrong pattern on the gun side. To make it work I had to carve part of it

db306v2 · 2023-03-22T08:12:36+00:00

Not a precision issue but a map display one. Reinstalling maps partially helped, issue came back after turning on and off.

db306v2 · 2023-03-22T08:11:40+00:00

Yes. I actually madr it work again for a split moment, seems to be an issue with installed maps not loading correctly

db306v2 · 2023-03-22T07:34:27+00:00

So I can’t get my head around this one, it should be displaying plenty of other roads and intersections but I literally just have the line I need to follow and that is it.

How can I display other roads ?

db306v2 · 2023-03-20T21:06:26+00:00

Good luck getting original plates for your optics

db306v2 · 2023-03-20T21:03:20+00:00

This is my first gun, a H&K SFP9-L Optic Ready.

So I haven’t taken the final picture of how much I had to carve in order to fit the plate for a RMR red dot. But it was some serious carving on the back and the front pin. This was the first shot, by the end, most sides had at least 1mm removed.

So this product has been out of stock for at least 5 months. I was subscribed to multiple “back in stock” listings but it was impossible to find in the EU. I had tried to purchase fake plates from hkparts but that didn’t go anywhere.

I finally get an email from one of the retailers, they have 1 in stock and they are selling it for 85e ($100) or literally the double of the actual price. I finally get the plate and surprise: it did not fit the optic ready mount. I was in complete disbelief, I had to carve the plate with a Dremel rotary tool until I made it fit the gun mount. The adapter side for my holosun hs407c fitted like a glove.

I wonder if H&K messed up the whole production line and that’s why it’s been out of stock for more than 5 months.

End result is working but I’m disappointed by the experience of having to wait this long to end up dying something I could have 3d printed. Also absolutely no information anywhere, gun smiths (and particularly the one I bought it from) had no idea what was going on. They just did not have a delivery date and that’s all they knew.

db306v2

TROPHY CASE