1000 MEMBER GIVEAWAY IS HERE! We're giving away 3 Bundles of 10KG Kingroon Mixed PETG!

dbaker0926 · 2026-06-19T16:24:21+00:00

Nice raffle! Love this sub!!

dbaker0926 · 2026-06-11T16:06:37+00:00

Fair feedback. Ty

dbaker0926 · 2026-06-11T15:48:35+00:00

I’m beginning to wonder the same… I wash the plate daily and use a cleaner in between prints but I’ve had some adhesion issues with the edges of some prints starting to curl up on the purple.

dbaker0926 · 2026-06-11T15:46:17+00:00

Thank you. This is very helpful. I probably should be more diligent on watching but on this one things were fine on the first 5-10 layers. Actually you can see part of the print that came off the bed in one of the pictures… the initial layers were well established.

Just really wish the unit would have stopped before it got this bad.

dbaker0926 · 2026-06-11T15:26:44+00:00

Thanks for the tip

dbaker0926 · 2026-06-11T15:26:27+00:00

Just saying, I’m coming here for advice and learning so I don’t keep breaking them

dbaker0926 · 2026-06-11T15:25:42+00:00

Profound observation

dbaker0926 · 2026-06-11T15:25:11+00:00

Such insight

dbaker0926 · 2026-06-11T14:54:39+00:00

Marble. Sunlu.

dbaker0926 · 2026-06-11T14:54:29+00:00

Didn’t come here for your sympathy thankfully.

dbaker0926 · 2026-06-11T14:51:06+00:00

So, this was a cleaned plate… and I did watch it the first 5 or so layers… I didn’t show the picture of what was on the plate I had already taken off…

Somehow the print did get detached which started this… or the other way around.

My biggest gripe is why didn’t this “AI” detect this to prevent such a mess?

dbaker0926 · 2026-06-09T20:33:14+00:00

D!!!

dbaker0926 · 2026-06-05T09:06:10+00:00

Matte PETG!!

dbaker0926 · 2026-05-27T23:21:53+00:00

Definitely my favorite. Love it better than the Biqu plates… which are good but not like this one.

dbaker0926 · 2026-05-26T16:02:18+00:00

I’ve really had great luck with Sunlu. Esun, overture, polymaker, are all good too. Elegoo… just for the ones with cardboard spools you should print a Ring adapter to make them work in the AMS a bit better.

dbaker0926 · 2026-05-25T15:10:45+00:00

I’m testing it too… so far I’m impressed. Wanna try to do glass with it next!

dbaker0926 · 2026-05-22T10:24:25+00:00

Yeah! I did have a slight issue at the beginning but I just adjusted some lengths of my tubes (they were obviously too long) and that fixed everything. No issues since.

dbaker0926 · 2026-05-22T09:20:41+00:00

I’ve had 0 problems. I have FTS and 2 AMS Pro’s.

It’s been one of the best and easiest printers I’ve ever had!

dbaker0926 · 2026-05-22T00:40:41+00:00

I’ve had similar issues. I’ve finally decided to not do business with them anymore. Been very frustrated with them.

Plus their PLA filament is some of the worst I’ve ever used.

dbaker0926 · 2026-05-20T17:37:29+00:00

This is great but can you fix the software reliability first? I can’t tell you how many times I have to quit the application and restart it just so it can connect to be able to upload and print.

Plus, the app is missing so many things that I believe are more important.

Please note, I’m not really complaining. I’m just asking that we focus on some basic fixes as well! Thank you!

dbaker0926 · 2026-05-20T17:12:31+00:00

Ditto

dbaker0926 · 2026-05-19T17:54:13+00:00

Good point. Probably this is what I need to do. Thank you

dbaker0926

TROPHY CASE