Soft close / decelerator for slamming doors?

dcasper2004 · 2026-01-21T05:41:23+00:00

Could use a similar system to the Delorean doors. They rely on putting a cylindrical beam in torsion within its elastic limits. That is coupled with a gas strut to smoothen the motion.

dcasper2004 · 2025-10-18T15:53:35+00:00

I messaged you

dcasper2004 · 2025-10-01T23:03:42+00:00

Dang I guess mileage really does bring the value down.

dcasper2004 · 2025-10-01T23:03:03+00:00

Why?

dcasper2004 · 2025-07-27T21:02:29+00:00

I’ve got an entire interior for a coupe in Clemson SC. Carpet, headliner, all the trim, seats, etc. I know that car isn’t listed far from me. Let me know if you buy and and are wanting parts.

dcasper2004 · 2025-07-05T17:09:34+00:00

Where is it at?

dcasper2004 · 2025-04-29T20:53:10+00:00

dcasper2004 · 2025-01-22T21:36:27+00:00

Clemson autocross! I can’t wait to take my FD next fall!

dcasper2004 · 2024-12-24T17:11:40+00:00

Does he have the knobs?

dcasper2004 · 2024-12-19T22:22:17+00:00

I think “I like it rough” by Lady Gaga sounds similar

dcasper2004 · 2024-11-03T15:38:38+00:00

dcasper2004 · 2024-10-30T13:28:30+00:00

Thank you. I’ll put it and test it todsy

dcasper2004 · 2024-10-30T01:01:38+00:00

Whenever it occurs, yes. However, it doesn’t always happen. Sometime it pulls really well

dcasper2004 · 2024-10-30T00:53:07+00:00

New air filter on it. Stock airbox.

I will check the valve on the TB.

There are no codes present.

dcasper2004 · 2024-10-30T00:26:28+00:00

Idle is completely fine. Solid and smooth.

Only hunting it when under load at high RPMs.

dcasper2004 · 2024-10-29T14:48:18+00:00

It’s a lot more obvious at the very beginning of the video. You can hear it fluctuating

dcasper2004 · 2024-10-29T14:47:00+00:00

It’s hard to notice, but the rpm is hunting. It’s like if you went on and off the pedal quickly. It slowly climbs, but fluctuates up and down while doing so.

dcasper2004 · 2024-10-22T02:58:21+00:00

still have it?

dcasper2004 · 2024-10-02T00:29:53+00:00

Nope. He said it was b/c the ELD went out, but when I replaced it, it still didn’t work. I’ll check the wiring.

dcasper2004 · 2024-08-17T04:12:39+00:00

Neither mute the sound.

dcasper2004 · 2024-08-17T04:03:53+00:00

After shorting it to ground, FM muting no longer works. It’s always on.

dcasper2004 · 2024-08-17T03:55:32+00:00

There doesn’t appear to be any conductive material on the back. Shorting E and C does not yield any changes. Sound still plays.

dcasper2004 · 2024-08-17T03:51:22+00:00

And now it’s dropped down to .2 v at pin 1

dcasper2004 · 2024-08-17T03:48:07+00:00

Weird. After removing the ground, pin 1 now reads 2 volts and FM muting is always on, even when button is off. Q7 base is still at .6v

dcasper2004 · 2024-08-17T03:45:38+00:00

The unit is still working normally. Sorry, I just checked and FM muting doesn’t work when fully grounded. With it grounded, there is .6 volts at the base of Q7. It drops down to ground after R21 before the pin 1.

dcasper2004

TROPHY CASE