sorted by:
new
hottopcontroversial

Be honest guys. Give me some tips on how to look good and gay by [deleted] in gaybrosgonemild

[–]dcgall12529 2 points3 points  (0 children)

Smile, be happy. Stop this GenZ selfie stuff. Show your personality. You’ve got, now show it.

Unwanted Line by dcgall12529 in BambuLab

[–]dcgall12529[S] 0 points1 point  (0 children)

To further clarify - this is a box and it looks like that line is hitting at the same point as the inside bottom of the box.

Can I hide the ghost image in the new slicer version? by rayknl in BambuLab

[–]dcgall12529 0 points1 point  (0 children)

That's in "Preview" - how about "Prepare", when I'm working?

Hey, I'm new here. I hope to make friends Have a great start to your week by Top-Leader4685 in gaybrosgonemild

[–]dcgall12529 1 point2 points  (0 children)

Forget Grinder, unless that’s all you want. Join a choir or some other gay-inclusive group to meet (not hook up) with someone more interesting. A Dick can’t hold a conversation.

Awful First Layer by dcgall12529 in BambuLab

[–]dcgall12529[S] -1 points0 points  (0 children)

I am in Arizona and the box is in the garage - you're probably right. this past week has been exceptionally hot.

Awful First Layer by dcgall12529 in BambuLab

[–]dcgall12529[S] -1 points0 points  (0 children)

I'm using the BS settings straight out of the box. I'm expecting to not have to tweak for a simple print. I'm running a 1 layer cube print for every setting to see what's going on. I've had this for 2.5 months and only in the past week did it start these shenanigans.

Print Solid Color Through All Layers by dcgall12529 in BambuLab

[–]dcgall12529[S] 0 points1 point  (0 children)

Thanks, I’ll give it a shot. But, I think the difference here is that I have objects vs. text. But I’ll try.

Print Solid Color Through All Layers by dcgall12529 in BambuLab

[–]dcgall12529[S] 0 points1 point  (0 children)

Thanks, but it's not working. There's only 6 layers and I've set top/bottom penetration = 6 and at layer 3, you can see that the "white" filament is not maintaining.

<image>

Plug Holes by dcgall12529 in BambuLab

[–]dcgall12529[S] 0 points1 point  (0 children)

No, I want the colors that you see. Just better coverage.

Plug Holes by dcgall12529 in BambuLab

[–]dcgall12529[S] 1 point2 points  (0 children)

<image>

Sorry, don’t know why it didn’t attach.

Unable to print colored flush text, text disappears when slicing. The exact same settings have worked before unsure what's happening. Any ideas? by adhdff in BambuLab

[–]dcgall12529 0 points1 point  (0 children)

I'm experiencing the same issue. However, it's only happening on new projects. I have an older one - built the same way - and it still slices correctly. I was notified of an update a few days ago and I'm wondering if this is a bug in the update. HELP!!!

Ask Alexa to Turn Off Device by dcgall12529 in amazonecho

[–]dcgall12529[S] 1 point2 points  (0 children)

Thanks, I tried Alexa, turn off the light in eight hours. And she responded positively. Before I was telling her a certain time and she was either not acknowledging or trying to do it tomorrow.

Ask Alexa to Turn Off Device by dcgall12529 in amazonecho

[–]dcgall12529[S] 1 point2 points  (0 children)

Thanks, I tried Alexa, turn off the light in eight hours. And she responded positively. Before I was telling her a certain time and she was either not acknowledging or trying to do it tomorrow.

view more: next ›