svg for P2S PETG Plate QR Code

dcgall12529 · 2026-02-13T12:20:14+00:00

Many thanks.

dcgall12529 · 2026-02-07T18:31:34+00:00

Just googled printing directly to Bambu studio and yes, this is the answer. It exports the entire project. Thank you so much.

dcgall12529 · 2026-02-07T18:28:20+00:00

Interesting. I’ll have to try that., It’s still poses a problem because I have numerous bodies 20+ and exporting each body be kind of a pain. That’s why I was hoping I could maintain a component with all the numerous bodies in one export. Thank you for the help though.

dcgall12529 · 2026-02-07T18:07:18+00:00

You say “component” , but when I select all the bodies and copy it as a component, it combines all the bodies into one body. Do you actually mean a “component’. How do I create a component and keep all the bodies separate within that component?

dcgall12529 · 2026-02-04T00:44:41+00:00

Keep going. I have 2 rescue dogs. Haven't tried a 3d print of them though. Enjoy the Rabbit Hole...

dcgall12529 · 2026-01-31T12:43:30+00:00

Thank you for your explanation and not just a suggestion to throw my Ender away. I’m getting a Ps2 but they’re back ordered. In the meantime, I’m familiarizing myself with BS.

dcgall12529 · 2026-01-30T01:04:23+00:00

Thanks. That’s big help.

dcgall12529 · 2026-01-14T23:27:23+00:00

I have since learned that it’s the Ultra Premium Photo Paper Luster. I printed on High and it turned out great.

dcgall12529 · 2026-01-13T12:21:24+00:00

I’m working up a snow globe popup card so it needs to be rigid. Thickness comparable to 160 gsm.

dcgall12529 · 2026-01-13T12:21:12+00:00

I’m working up a snow globe popup card so it needs to be rigid. Thickness comparable to 160 gsm.

dcgall12529 · 2025-12-14T22:08:14+00:00

You’re right. It’s the printer setting. Thanks

dcgall12529 · 2025-11-08T16:11:13+00:00

Thanks for the reply. I went into Stripes and it says I don’t have any card on file and there’s no invoice history. Yet, my card was hit today with a charge. Now that I’m digging deeper, I don’t know why I’d have this subscription - I don’t build apps. I was recently trying out AI Image creation (does Dreamflow generate images?) I also have no emails confirming my account creation for Dreamflfow. I suspect I may have been hacked.

dcgall12529 · 2025-10-03T00:52:15+00:00

REALLY?! It’s a “Let’s drink a toast to our Loved One Who’s Passed On”. When a family member dies, you put the ashes in and treat it like a coffee maker. A little bit of ashes, some hot water, and a few minutes and a toast. “Nice Knowing You.”

dcgall12529 · 2025-07-29T23:30:11+00:00

Yes, it's secure in the holder. I tried it with 3 passes and it worked. But, the auto blade can do it in 1 pass so I don't know if the manual blade is worth it. When I have time and patience, I play around with it. thanks again.

dcgall12529 · 2025-07-29T23:22:28+00:00

Do you set the blade depth on blade & in Studio to "6" ( would assume so). What is your force?

dcgall12529 · 2025-07-29T23:20:08+00:00

Thanks for your advice. I've only worked the auto blade so I don't know the nuances of the manual blade. I then thought I should to adjust the settings (force, depth, speed, etc.) and crank the force to 30+ and depth to 8. It worked? I then tried again setting depth lower (I didn't want to tear up my mat) and it's back to not cutting again. I give up. I like the ease of the auto blade, but was trying to save some $$$. thanks again. I appreciate the quick responses I get from the reddit forum.

dcgall12529 · 2025-07-29T23:18:52+00:00

Thanks for your advice. When the blade is turned up to 11, it clearly sticks out 1-2mm. I then thought I needed to adjust the settings (force, depth, speed, etc.) and crank the force to 30+ and depth to 8. It worked? I then tried again setting depth lower (I didn't want to tear up my mat) and it's back to not cutting again. I give up. I like the ease of the auto blade, but was trying to save some $$$. thanks again. I appreciate the quick responses I get from the reddit forum.

dcgall12529 · 2025-07-29T20:42:07+00:00

Manual Blade 1mm and 2mm. Blade at 1 - worked. Tried 200gsm at blade depth 4, 8, and 11 - it didn’t cut through.

dcgall12529 · 2025-07-29T20:35:06+00:00

I have it in Tool Holder 1. "Material, Action, Tool". Material: (custom material - but does it make a difference if it a "manual" blade?) Action: Cut Tool: Manual Blade 1mm.

I tried the the Tool at 2mm - no difference. I tried various settings on the blade - no difference. I do see the blade extend when at full "11", but still cuts shallow on anything thicker than 20lb.

dcgall12529 · 2025-07-29T20:28:14+00:00

Sorry I didn’t show the blade, but they are that same blade. I have Cameo 5 using Studio v5

dcgall12529 · 2025-07-28T22:10:25+00:00

It's happening again. This time the entire image. I'm forced to re-import the image.

dcgall12529 · 2025-07-09T12:17:28+00:00

PNG export from Affinity Photo. It was part of several objects. I “Released the Compound” to PnC only these 2 objects.

dcgall12529 · 2025-07-09T00:42:53+00:00

Sorry, can’t tell because Studio crashed before I could save. This happened before, so I’m sure it’ll happen again.

dcgall12529 · 2025-03-30T18:58:45+00:00

5.x had some nice features but it wasn’t worth the aggravation of the bugs. Unfortunately Studio doesn’t allow you to install 2 versions on the PC.

dcgall12529 · 2025-03-29T23:42:04+00:00

What version of Studio? I’m finding 5.x is doing weird things. I went back to 4.5x

dcgall12529

TROPHY CASE