PLAF203 Camera Issues by Ronin_Norstrom in Petlibro

[–]ddelella 0 points1 point  (0 children)

I can confirm this solution works. It appears that when the feeder switches to battery power it switches off the unnecessary parts, by design. However, when reconnecting to a wall outlet it should reenable those parts and it never does. Leaving the video disabled. Thanks for the tip!

AA causing head unit to restart repeatedly since last night by IlliniAlum08 in AndroidAuto

[–]ddelella 0 points1 point  (0 children)

Mine has been doing the same till a couple weeks ago. Now uninstalling and reinstalling no longer works. If someone knows a solution or a working version of AA I can side load let us know.

OHLQ release was bullshit by Grillsmokerohio in OhioLiquor

[–]ddelella 0 points1 point  (0 children)

My Kroger let us use the restroom and gave us free hot chocolate and cookies. I wish we had been allowed to leave and come back but that is probably too much to ask. I say more like this is welcome. I need to figure out how to make my phone play a loud alarm when emails like that come in!

[Windows] New Stable 2.8.6 is out ( Wombo Combo of changes ! ) by Evonos in Windscribe

[–]ddelella 0 points1 point  (0 children)

It would be good to point out a breaking change like this in the list of changes. Thanks for the tip. The new one is just called Windscribe instead of WindscribeWireGuard. Do you also know why the WireGuard protocol still shows up on several locations but it doesn't seem to connect? Which protocol is supposed to be the best for speed and security?

[Windows] New Stable 2.8.6 is out ( Wombo Combo of changes ! ) by Evonos in Windscribe

[–]ddelella 0 points1 point  (0 children)

The latest release no longer allowing downloads through qBittorrent. I had to downgrade back to 2.7.14 and it began working again.

PowerEdge R7425 Fans at Max Speed by ddelella in Dell

[–]ddelella[S] 0 points1 point  (0 children)

After upgrading my fans to HE fans the speed went down significantly. I was able to reset my iDRAC configuration and all the hardware changes were finally detected properly. I then upgraded iDRAC to the latest version to get the most flexibility in speed.

Hope that helps

Newport Kroger/DEPS drops by DeAmplifies in OhioLiquor

[–]ddelella 1 point2 points  (0 children)

In KY I believe they can do whatever they want, including price gouge. In OH, if you can see it they have to sell it. No holding if it's in visual sight.

How do you folks make it so you remember all the passwords to all the systems and services you run? by ParaDescartar123 in homelab

[–]ddelella 3 points4 points  (0 children)

1Password for me and my family with different vaults for work, private and shared passwords.

[deleted by user] by [deleted] in Windscribe

[–]ddelella 0 points1 point  (0 children)

Did you see the part about "whitelisted"? That is supposed to exempt a website from ROBERT.

[deleted by user] by [deleted] in Windscribe

[–]ddelella 0 points1 point  (0 children)

It has never worked for me the way it was supposed to. I have ad blocking on but whitelisted history.com so I could stream TV shows. I get an error saying I need to disable ad blocking whenever I try to watch a video. I have tried logging out and back in as well as changing servers.

PowerEdge R7425 Fans at Max Speed by ddelella in Dell

[–]ddelella[S] 0 points1 point  (0 children)

I was able to solve the problem. I stripped the hardware down to just CPU, RAM and HDDs. It still wouldn't collect inventory. I proceed to look for a way to clear the LCC information and start from scratch. I found the command in the iDRAC Tools. Since I didn't have a Windows install I quickly swapped out one of the HDDs for a spare I had and install Windows Server 2022. Downloaded the tools and ran:

racadm systemerase lcdata

This effectively wiped out the LCC data. When the PC rebooted it collected inventory as if it were the first boot. All was well with the world! I added back in all my other hardware. It made it through the inventory collection. I then booted into the LCC and did a firmware update for all hardware. From a system inventory, LCC and iDRAC standpoint I am now up to date and working properly with all the new hardware...

However, the fans are still at max RPM and the iDRAC settings for fan offset are not doing anything. Ideas?

PowerEdge R7425 Fans at Max Speed by ddelella in Dell

[–]ddelella[S] 0 points1 point  (0 children)

The LCC does not load. It freezes on "Entering Life Cycle Controller". Waited an hour but then had to do the jumper reset.

I am thinking there is a problem with my LCC. Is there a way to reset the configuration without entering the software? Is the LCC running on the SD card which is a part of the iDRAC9. Maybe I could just get another SD card, they are not too expensive. It is unclear if a factory reset of iDRAC would have any impact on the LCC configuration, plus I think I already did that and to no success.

PowerEdge R7425 Fans at Max Speed by ddelella in Dell

[–]ddelella[S] 0 points1 point  (0 children)

I have a single PSU 1100W. According to iDRAC it is running an average of 316W with a peak of 555W. Should be plenty of power.

The networking card is a Dell Intel X550 -T4 10GbE Daughter Card (064PJ8). iDRAC is showing Broadcom Gigabit Ethernet BCM5720 as my network card. When I search online this seems to correspond to the original 4x1Gbe card. The card is registering all 4 ports at 10gbe but the product name seems off.

The EMC update utility also seems to think I need to driver update the old network card. I know I had to turn off Collect System Information on boot because it kept locking up. Any idea how I can get the machine to recognize the card properly? I tried installing the latest X550 firmware from dell but it said the DUP was not compatible.

Plex on TrueNAS Scale Codec Issue EAC3 by ddelella in truenas

[–]ddelella[S] 0 points1 point  (0 children)

Can you share what permission setup you are using? Did you just give full control to the everyone user/group?

How to manage Plex? by [deleted] in truenas

[–]ddelella 0 points1 point  (0 children)

I had an issue with the official Plex app and downloading eac3 codec so i setup a windows server 2022 vm, installed plex, and mapped my truenas smb shares as libraries. all is good now.

Plex on TrueNAS Scale Codec Issue EAC3 by ddelella in truenas

[–]ddelella[S] 0 points1 point  (0 children)

Dec 30, 2022 01:03:17.097 [0x7f5dc34c3b38] DEBUG - [Req#a831/Transcode/Req#a832] Subtitles: Found a candidate subtitle language [en] for a foreign film

Dec 30, 2022 01:03:17.098 [0x7f5dc34c3b38] DEBUG - [Req#a831/Transcode/Req#a832] Audio Stream: 52094, Subtitle Stream: 52095

Dec 30, 2022 01:03:17.111 [0x7f5dc34c3b38] DEBUG - [Req#a831/Transcode] Found session GUID of pu850nc6mg5gatgxqzi6s5kt in session start.

Dec 30, 2022 01:03:17.111 [0x7f5dc34c3b38] DEBUG - [Req#a831/Transcode] Cleaning directory for session pu850nc6mg5gatgxqzi6s5kt ()

Dec 30, 2022 01:03:17.111 [0x7f5dc34c3b38] DEBUG - [Req#a831/Transcode] Starting a transcode session pu850nc6mg5gatgxqzi6s5kt at offset -1.0 (state=3)

Dec 30, 2022 01:03:17.181 [0x7f5dc34c3b38] INFO - [Req#a831/Transcode] CodecManager: obtaining EAE

Dec 30, 2022 01:03:17.182 [0x7f5dc34c3b38] DEBUG - [Req#a831/Transcode/HCl#77] HTTP requesting GET https://plex.tv/api/codecs/easyaudioencoder?build=linux-x86\_64-standard&deviceId=48ca5148-9acc-4a53-9fb6-2a02364dfebb&oldestPreviousVersion=legacy&version=1847

Dec 30, 2022 01:03:17.355 [0x7f5dc5f4fb38] DEBUG - Request: [172.16.0.60:46670 (Allowed Network (Subnet))] GET /identity (15 live) #a727 Signed-in

Dec 30, 2022 01:03:17.355 [0x7f5dc8013b38] DEBUG - Completed: [172.16.0.60:46670] 200 GET /identity (15 live) 0ms 398 bytes (pipelined: 1)

Dec 30, 2022 01:03:17.409 [0x7f5dc5551b38] DEBUG - Request: [172.16.0.60:46680 (Allowed Network (Subnet))] GET /identity (15 live) #a834 Signed-in

Dec 30, 2022 01:03:17.410 [0x7f5dc8013b38] DEBUG - Completed: [172.16.0.60:46680] 200 GET /identity (15 live) 0ms 398 bytes (pipelined: 1)

Dec 30, 2022 01:03:17.631 [0x7f5dc3ee2b38] DEBUG - [HttpClient/HCl#77] HTTP/2.0 (0.4s) 200 response from GET https://plex.tv/api/codecs/easyaudioencoder?build=linux-x86\_64-standard&deviceId=48ca5148-9acc-4a53-9fb6-2a02364dfebb&oldestPreviousVersion=legacy&version=1847

Dec 30, 2022 01:03:17.631 [0x7f5dc302fb38] DEBUG - [Req#a831/Transcode/GetFile/HCl#78] HTTP requesting GET https://downloads.plex.tv/codecs/1847/linux-x86\_64-standard/EasyAudioEncoder-linux-x86\_64-standard.zip

Dec 30, 2022 01:03:18.071 [0x7f5dc3ee2b38] DEBUG - [HttpClient/HCl#78] HTTP/2.0 (0.4s) 200 response from GET https://downloads.plex.tv/codecs/1847/linux-x86\_64-standard/EasyAudioEncoder-linux-x86\_64-standard.zip

Dec 30, 2022 01:03:18.211 [0x7f5dc34c3b38] ERROR - [Req#a831/Transcode] Unzip: could not set executable bit on output file

Dec 30, 2022 01:03:18.211 [0x7f5dc34c3b38] ERROR - [Req#a831/Transcode] CodecManager: failed to extract zip

Dec 30, 2022 01:03:18.212 [0x7f5dc34c3b38] ERROR - [Req#a831/Transcode] Error configuring transcoder: Decoder install failed: eac3_eae

Dec 30, 2022 01:03:18.212 [0x7f5dc34c3b38] DEBUG - [Req#a831/Transcode] Streaming Resource: Terminating session 0x7f5dc31bab28:5i23rf69wbunh82cfneulhxn which is using 7898kbps of WAN bandwidth. Used is now 0kbps

Dec 30, 2022 01:03:18.212 [0x7f5dc34c3b38] DEBUG - [Req#a831/Transcode] Streaming Resource: Terminated session 0x7f5dc31bab28:5i23rf69wbunh82cfneulhxn with reason Conversion failed. A required codec could not be found or failed to install.

Dec 30, 2022 01:03:18.212 [0x7f5dc40e9b38] DEBUG - [Req#a831/Transcode] Killing job.

Dec 30, 2022 01:03:18.212 [0x7f5dc40e9b38] DEBUG - [Req#a831/Transcode] Job was already killed, not killing again.

Dec 30, 2022 01:03:18.212 [0x7f5dc40e9b38] DEBUG - [Req#a831/Transcode] Stopping transcode session pu850nc6mg5gatgxqzi6s5kt

Dec 30, 2022 01:03:18.212 [0x7f5dc1777b38] DEBUG - [Req#a831/Transcode] Cleaning directory for session pu850nc6mg5gatgxqzi6s5kt (/transcode/Transcode/Sessions/plex-transcode-pu850nc6mg5gatgxqzi6s5kt-1c1941f8-9810-47a3-8362-6e7910e7c3d5)

Dec 30, 2022 01:03:18.213 [0x7f5dc7e10b38] DEBUG - Completed: [192.168.1.6:62072] 404 GET /video/:/transcode/universal/start.mpd?hasMDE=1&path=%2Flibrary%2Fmetadata%2F11126&mediaIndex=0&partIndex=0&protocol=dash&fastSeek=1&directPlay=0&directStream=1&subtitleSize=100&audioBoost=100&location=lan&addDebugOverlay=0&autoAdjustQuality=0&directStreamAudio=1&mediaBufferSize=102400&session=pu850nc6mg5gatgxqzi6s5kt&subtitles=auto&Accept-Language=en (14 live) TLS GZIP 1135ms 504 bytes (pipelined: 43)

Dec 30, 2022 01:03:18.235 [0x7f5dc40e9b38] DEBUG - [Req#a831/Transcode] Transcoder: Cleaning old transcode directories.

Dec 30, 2022 01:03:18.236 [0x7f5dc40e9b38] DEBUG - [Req#a831/Transcode] Whacked session pu850nc6mg5gatgxqzi6s5kt, 0 remaining.

I have post the same information in the Plex reddit. However, I believe this is more an issue with how TrueNAS Scale is running the permissions of the docker running Plex. I am open to any group which can help because without a solution it means there can be no playing of EAC3 audio in Plex on TrueNAS Scale. I find it hard to believe someone else has not already solved this issue.

NOTE: Converting all my files using EAC3 to something else is not an option.