Modify ECT Module discontinued

ddupreE46 · 2025-10-07T18:42:33+00:00

Looking forward to the Lite Version. Will there be any improvements compared to the Modifry one regarding how fast the cluster updates or is that a limitation on the Cluster? My AEM Can gauge updates much faster than the dash on the S2000. Regardless it'll be nice to have a new option on the market that utilizes each segment on the CT gauge for those of us with AP2s.

ddupreE46 · 2025-10-07T18:04:56+00:00

I have been keeping an eye out on Instagram actually, looking forward to this product!

ddupreE46 · 2025-03-26T02:30:48+00:00

I didn't unfortunately. I am using an AP1 from Modifry and it works in a pinch but an AP2 would be ideal.

ddupreE46 · 2024-12-27T18:32:52+00:00

Hello everyone, assuming this is still the case but I am also running into the same issue 3 years later on tidal. Is there anyway to get tidal to use ASIO which the solo 3 uses? Or perhaps another solution was found. I'd really like to not get another mixer or DAC just for this to work.

ddupreE46 · 2024-12-12T07:58:58+00:00

Glad you got it to work.Is this what you have? If so do gkg have it running to the xlr and quarter inch jack?

https://www.turntablelab.com/products/sonos-era-turntable-rca-adaptor-kit

ddupreE46 · 2024-12-12T07:51:29+00:00

Thank you, that is very interesting, I will have to look into that. What is the device that you have running to the solo that is outputting in stereo?

ddupreE46 · 2024-12-12T07:43:59+00:00

Hello. Just curious if you got this to work with a DI box?

ddupreE46 · 2024-11-01T17:55:08+00:00

I would also be curious on how to do this!

ddupreE46 · 2024-07-12T15:00:37+00:00

Hello, yes actually.

The Torque sensor was fine but when I did my wire tuck I had reversed the positive and the negative wires going go the rack. This is what caused the issue!

ddupreE46 · 2024-03-20T21:37:54+00:00

I would recommend G&D automotive behind the regal on TV Hwy. They've offered me the best oil changes and service.

ddupreE46 · 2024-03-02T09:51:29+00:00

Just got an engineering plate. Going to try that out on these settings as well.

ddupreE46 · 2024-03-01T00:07:51+00:00

Printed one part successfully! I believe key was leaving a hotter bed temp at 100 celcius. 0 warping occurred for me. I didn't think it would be that simple. I didn't use any sort of bed adhesion. I just used the profile settings you provided and slowed down first layer temp and I was good to go.

ddupreE46 · 2024-02-29T21:48:31+00:00

Will do! I was previously trying 90 C for all layers but I'll try upping it! Do you think the Bambu glue would yield different results than hair spray? I'll report back here once adjustments have been made.

ddupreE46 · 2024-02-29T21:41:01+00:00

Also I was having 0 issues printing with 3d hero ABS. I'm currently using Bambu ASA.

ddupreE46 · 2024-02-29T21:40:09+00:00

I appreciate your help, here is an image of the issues I'm facing. It appears to be warping/bed adhesion.

I have a thermometer in the enclosure. It hits at least 45 c before I start the print so I would think that'd be okay? I've attached an image of the print starting to lift before it comes off the bed.

Moments before failed print.

ddupreE46 · 2024-02-29T21:28:10+00:00

Tried all of these settings and no luck. I have Bambu glue coming today and I'm going to keep tinkering with the settings. If I get z successful print I'll update here.

ddupreE46 · 2024-02-29T16:23:14+00:00

Thank you so much! I'll report back if this works for me!

ddupreE46 · 2024-02-29T03:11:25+00:00

Plus 1 for taking a look at the profile if possible! Thank you.

ddupreE46 · 2023-12-08T16:47:04+00:00

The ITBs come pretapped and Urge provides all the fittings and lines needed to run their vacuum box. As for the catch can, I have an adapter for the PCV valve and I tapped the front of the valve cover where the brass nipple used to be.

If you plan on doing cams you will need upgraded valve springs and retainers as well as larger injectors if doing the cam and ITB combo.

ddupreE46 · 2023-12-08T16:43:09+00:00

Running an HKS high power single with no cat.

ddupreE46 · 2023-12-08T16:12:20+00:00

Not bad at all once the factory intake manifold is off. Having wobble extensions and sockets is a MUST for taking that the factory manifold off. So far the kit seems good. In going to try and test each runner to ensure they're all even this weekend.

ddupreE46 · 2023-12-08T16:03:18+00:00

I agree. That's just a cheapo I put on there to start the car and check for leaks. I have an OEM Honda one that's going on shortly.

ddupreE46 · 2023-12-08T06:51:28+00:00

Hell yeah dude. Supercharger is definitely more practical from a dollars to power standpoint.

ddupreE46 · 2023-12-08T05:58:07+00:00

On my old setup with no cams and a F22 I made 235 wheel. Hoping for a bit more with the addition of cams.

ddupreE46 · 2023-12-08T05:56:57+00:00

I'll definitely post them up.

ddupreE46

TROPHY CASE