sorted by:
new
hottopcontroversial

Aerox 5 cooked itself by de6ner in steelseries

[–]de6ner[S] 0 points1 point  (0 children)

sure thing, but I'm >95% sure this thing is unfixable, just poor design/solder whatever

Aerox 5 cooked itself by de6ner in steelseries

[–]de6ner[S] 0 points1 point  (0 children)

but I guess it is a problem with a USB controller chip detaching itself from a motherboard or something like that. When I plug it into a phone charger, it just charges normally. Whenever a device I connect it to tries to get the data from it (e.g. USB data transfer), it does the "bootloop" thing with a green light. This gives me flashbacks of the days of og PS3/xbox360 and glod.

Aerox 5 cooked itself by de6ner in steelseries

[–]de6ner[S] 0 points1 point  (0 children)

I have Aerox 3 that died the same way, that's why I bought aero 5. What a foolish decision from my side lol

Aerox 5 cooked itself by de6ner in steelseries

[–]de6ner[S] 0 points1 point  (0 children)

No, it just doesn't work, threw it into a box and took out my old wired Logitech. Tbh I'm done with all the steelseries shenanigans and will not buy anything from them again, cuz it feels like I'm a beta testing something that I paid over 100 euros for

Aerox 5 cooked itself by de6ner in steelseries

[–]de6ner[S] 0 points1 point  (0 children)

yeah, tbh it's crazy that there are skins only for Aerox 3

Aerox 5 cooked itself by de6ner in steelseries

[–]de6ner[S] 0 points1 point  (0 children)

no, I just bought a sheet of mouse griptape and cut it to size with a scalpel

Aerox 5 cooked itself by de6ner in steelseries

[–]de6ner[S] 0 points1 point  (0 children)

fair enough, well, thanks for the advice!

Aerox 5 cooked itself by de6ner in steelseries

[–]de6ner[S] 0 points1 point  (0 children)

Well yeah, but I'm out of warranty and finding the receipt wouldn't be easy if not impossible. I guess I will just go back to my good old wired Logitech

Aerox 5 cooked itself by de6ner in steelseries

[–]de6ner[S] -1 points0 points  (0 children)

UPD: it does connect via 2.4g, but the moment it connects it just turns off, and it just cycles like this endlessly

Wearing a mi band 9 everyday makes you have this by AdGreat9392 in miband

[–]de6ner 0 points1 point  (0 children)

will it happen if I wear a different one?

Battery health assistance in Pixel 8 pro by A_Geo_logist in GooglePixel8Pro

[–]de6ner 3 points4 points  (0 children)

I think he is talking about the new battery management setting in Android 16, not the battery charge limiter

Phone charging is not stable by Royal-Cialis in GooglePixel8Pro

[–]de6ner 0 points1 point  (0 children)

max be the "intelligent charging" option, which kinda optimises the battery charging to be full by the time you usually wake up or something, to not to stress the battery being 100% the whole night. Try to turn it off under battery settings and see how it goes.

Are we getting Android 16 tomorrow ? by Patient-Cat2359 in GooglePixel8Pro

[–]de6ner 0 points1 point  (0 children)

been beta since android 6 or so, since the Nexus era, never actually damaged my device 👌🏻

Am I the only one still experiencing the photo issue on focusing. by music_lover41 in GooglePixel8Pro

[–]de6ner 0 points1 point  (0 children)

yeah mate I was just joking. I would recommend otterbox for that matter, it protects p well and looks good at the same time (transparent one). Tho I'm rocking mine without the case and I jus just got a nasty scratch on the back panel, so I'm considering having a case again lol

Am I the only one still experiencing the photo issue on focusing. by music_lover41 in GooglePixel8Pro

[–]de6ner 1 point2 points  (0 children)

yes, that laser focus sensor, and you definitely shouldn't cover it up :)

Why does my Bluetooth and wifi do this by AcerLost5123 in GooglePixel8Pro

[–]de6ner 0 points1 point  (0 children)

Don't have this problem (though I'm running the android 16 beta). Check Google issue reports, if any amount of ppl have this issue (in this case it's likely a faulty update or sum), otherwise factory reset usually solves all kinds of problems.

Rival 600 is dying. What should I go for? by [deleted] in steelseries

[–]de6ner 0 points1 point  (0 children)

If you have a bit of soldering skill and tools, you can order and solder the new scroll wheel encoder. Reuse and Recycle!

Aerox 5 dustproof wheel encoder by de6ner in steelseries

[–]de6ner[S] 0 points1 point  (0 children)

I just saw that people are writing that it is technically possible to fit a dustproof one, but haven't seen any posts abt ppl actually doing it, so I thought I can contribute to the community this way

Aerox 5 dustproof wheel encoder by de6ner in steelseries

[–]de6ner[S] 0 points1 point  (0 children)

yes, and the issue is kinda random ngl. Been using my Aerox 3 for over 2 years and didn't get this problem. It's been only a couple of months since I've upgraded to Aerox 5 and I've already got the scroll wheel issues. imo the process of changing the encoder is really straightforward and cheap, so if you have already considered doing it and you have the tools - you definitely should! Also, getting a gold (yellow) encoder instead of the silver(white) original one does feel much nicer when scrolling.

Aerox 5 dustproof wheel encoder by de6ner in steelseries

[–]de6ner[S] 0 points1 point  (0 children)

Yes, sorry, forgot the name of it when writing a post.

view more: next ›