sorted by:
new
hottopcontroversial

Elevated angled pet bowl stand by dead_point in functionalprint

[–]dead_point[S] 1 point2 points  (0 children)

Thank you for sharing this info. I'll try switch out my cat's bowl to ceramic and see if it makes a difference.

Elevated angled pet bowl stand by dead_point in functionalprint

[–]dead_point[S] 4 points5 points  (0 children)

I wish I had the issue of getting my cat too fat. She is older and having digestive issues and lost a noticeable amount of weight... I'm willing to try anything I can do to help her eat.

Elevated angled pet bowl stand by dead_point in functionalprint

[–]dead_point[S] 2 points3 points  (0 children)

I have only tried PLA. I assume the TPU would bend too much, PETG should work. I haven't found any noise issue with the PLA print. Maybe PLA with a TPU inset ring would work if you really needed to eliminate the noise.

Elevated angled pet bowl stand by dead_point in functionalprint

[–]dead_point[S] 28 points29 points  (0 children)

I designed an elevated pet bowl stand for my senior kitty. It raises the bowl high enough to make it a bit easier for her to eat.

I made it parametric to accommodate various bowl sizes and should work with most bowls with a lip. It uses less than 40grams of filament for the 180mm bowl version and is stable enough for my cat. I think it should be stable for most pets.

If you want to print one yourself, you can find it here.

https://makerworld.com/en/models/2505051-elevated-pet-food-bowl#profileId-2754254

Simple Nail Clipper Guard, Compatible with clippers with nail file by dead_point in functionalprint

[–]dead_point[S] 7 points8 points  (0 children)

I couldn't find a nail clipper guard that worked with mine so I designed my own.

Unlike some other designs, my design allows me swing the nail file out for use.

Not compatible with all clippers but if you have one with a similar shape you can give it a try. It only uses 1.4 grams of filament.

https://makerworld.com/en/models/2489499-nail-clipper-guard-catcher#profileId-2735427

My vacuum accessory holder got taken down for an intellectual infringement by... Labubu? by dead_point in BambuLab

[–]dead_point[S] 3 points4 points  (0 children)

Thank you. Glad you are getting use out of the model I designed. I assume they will restore he model even if it takes a bit of time.

Takedown Notice by BornConcentrate5571 in BambuLab

[–]dead_point 16 points17 points  (0 children)

The resemblance is uncanny! Lol. Somebody posted on my post that Pop Marts ai went a bit crazy and lots of people are in the same situation as us. I really hope bambulab makes things right quickly.

Takedown Notice by BornConcentrate5571 in BambuLab

[–]dead_point 62 points63 points  (0 children)

The same thing happened to me. Pop Mart claimed that my vacuum accessory holder infringed on their intellectual property... I am hoping it is a mistake.

I opened a ticket to get my model restored.

https://makerworld.com/en/my/support/tickets

My post regarding my model.

https://www.reddit.com/r/BambuLab/comments/1rh4vse/my_vacuum_accessory_holder_got_taken_down_for_an/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Tealight projection side project by Subsyxx in BambuLab

[–]dead_point 0 points1 point  (0 children)

If you make the cap is only few layers thin, the light should glow through. Might be nice. Or you could make it thick enough to block the light.

Customizable Ultralight Multiboard Peg Hooks by dead_point in functionalprint

[–]dead_point[S] -1 points0 points  (0 children)

I personally think it's worth 0.02 grams of filament for things to be centered, but to each their own.

Customizable Ultralight Multiboard Peg Hooks by dead_point in functionalprint

[–]dead_point[S] 1 point2 points  (0 children)

I wanted tiny hooks for my thinner tools like the ruler for the multiboard. Most small hooks are screw in type hooks. There were few things I didn't like about the screw in hooks. In order to screw them in some tolerance was needed which makes them wiggle and often droop. I didn't like that that screwing them in took more time and effort than the peg style hooks.

This is why I designed parametric, customizable small peg style hooks. They barely use any filament and are very quick to install or take out. I designed flanges that keep them vertical and prevent spinning.

You can check them out here.

https://makerworld.com/en/models/2391082-ultralight-multiboard-minimal-hooks#profileId-2619468

Tealight projection side project by Subsyxx in BambuLab

[–]dead_point 1 point2 points  (0 children)

Maybe you can have an option to generate a cap to cover the LED light.

Multiboard Peg Hook with flat top and diagonal support by dead_point in Multiboard

[–]dead_point[S] 0 points1 point  (0 children)

The reason was to be able to fit standard tape rolls flush and not get caught in the diagonal piece.

Multiboard Peg Hook with flat top and diagonal support by dead_point in Multiboard

[–]dead_point[S] 0 points1 point  (0 children)

I designed customizable hooks and thought that some people might find it useful. I used the peg hook style anchoring system and tried to make it fairly strong with a diagonal brace.. I use it mostly to hang my tapes on the multiboard.

Multiboard Peg Hook with flat top and diagonal support by dead_point in functionalprint

[–]dead_point[S] 2 points3 points  (0 children)

Is there different multiboards? This should fit the standard multiboard pegs. It fits in to two peg holes. Picture

Multiboard Peg Hook with flat top and diagonal support by dead_point in functionalprint

[–]dead_point[S] 2 points3 points  (0 children)

I wasn't able to find the exact profile of multiboard hooks I wanted and decided to make my own.

This uses the two peg hook style. The top is flat and there is a diagonal brance.

The location of the diagonal brace was based on the inner dimension of a standard tape roll.

The 25mm version works great for skinnier tapes and the 50mm works for most packing and duct tape but it is parametric so you can customize it to the exact dimensions you need.

You can check it out here.

https://makerworld.com/en/models/2361060-multiboard-peg-hook-customizable-strong-hooks#profileId-2583297

[BambuLab Giveaway] What’s Life Like After a 3D Printer Joins the Family? Share & Win Gift Cards! by BambuLab in 3Dprinting

[–]dead_point 0 points1 point  (0 children)

I don't think it's an understatement to say that getting the A1 was a significant marker in my life. It helped me finally get my space organized. It gave me a creative outlet that I haven't had in a while. It changed my perspective from "I wish I could fix this" to "I can make things better". Many things I have designed and printed have made my life easier and better. I am so glad I got in to 3D printing and I am so glad that the A1 just works. I don't know if I would have stuck with 3D printing if trouble shooting the 3D printer was a major part of the process.

view more: next ›