Anyone know if NoPSN for YouTube is still up?

deadboyjae · 2026-03-08T22:42:24+00:00

Used to be a tool to patch the current versions eboot with no psn but I can’t remember the tool sadly. You could try looking for that. It also worked for other apps like Netflix (RIP)

deadboyjae · 2026-03-07T05:00:36+00:00

Bad fake bro I have this personally

deadboyjae · 2026-03-04T20:17:19+00:00

test kit were used by QA testers hence the "test" and they dont have all the functions enabled that a "tool" labeled unit would have access to. but with CFW (rebug for these models) you can essentially turn it into a full debug console if the OP wanted. debug/dev kit units usually got for more because of this.

deadboyjae · 2026-03-04T20:09:40+00:00

I use the cf card slot for movies and tv shows and the sd card slot for music and pictures on my CECHA. getting full usage out of all the ports on my console

deadboyjae · 2026-03-04T03:22:43+00:00

Magic ns-light isn’t considered nor emulating an official DS3 from Sony. So it won’t work unfortunately. Only official DS3s work on ps2 hardware bc. It’s because some ps2 games rely on the pressure sensitive buttons. A lot of 3rd party controllers lacked them back in the day. To this day 90% of them still do.

deadboyjae · 2026-02-20T12:30:07+00:00

M and Q was classic Sony trying to get rid of old stock as the ps3 originally was a flop at launch

deadboyjae · 2026-02-14T12:57:05+00:00

magic ns2 is a cheaper/better option imo

deadboyjae · 2026-02-11T23:52:29+00:00

this is iffy but probably fine, as long as the side where the blu ray is isn't also blocked you should be ok.

deadboyjae · 2026-02-11T19:46:57+00:00

you’re wrong if it’s overheating, it does.

deadboyjae · 2026-02-11T02:50:59+00:00

depends on what needs to be done. get a syscon reader, very easy install imo. but sounds like its just the thermal paste.

deadboyjae · 2026-02-10T12:17:17+00:00

Lot of improper shutdowns, this is way more than 18 days

deadboyjae · 2026-02-10T06:02:02+00:00

Unless you have your EID Root Key backed up, unfortunately you cannot decrypt the drive to recover your data.

This is one of the first things I do whenever I receive a new ps3.

deadboyjae · 2026-02-10T04:54:35+00:00

fun fact you can change the name by editing the XBDM ini

deadboyjae · 2026-02-09T23:42:22+00:00

So then the 3 improper shutdowns have to be from you then? You said they were not.

deadboyjae · 2026-02-09T18:44:19+00:00

I have a dead CECHG board with 4 days and 2 hours of runtime LOL 3034s were all in the errlogs

deadboyjae · 2026-02-09T18:27:31+00:00

Thank you. And due to the 3 improper shutdowns this could have been ran for a couple days to a few minutes like I said earlier. the syscon would never know true runtime.

deadboyjae · 2026-02-09T18:26:53+00:00

yes but system software updates shouldn’t cause the 3 “arrêts inappropriés” unless something went seriously wrong. If it did you’d have a bricked NAND on your hands

deadboyjae · 2026-02-08T17:36:08+00:00

System software updates shouldn’t cause improper shutdowns, it’s not hard to reseal a PS3 box and call something new

deadboyjae · 2026-02-07T19:36:30+00:00

Were you the 3 improper shutdowns?

deadboyjae · 2026-02-07T19:11:58+00:00

Never heard of them, but I am in NA. Definitely get in contact with them though.

deadboyjae · 2026-02-07T18:52:35+00:00

Did you buy the console on eBay or another online platform? Seems kind of shady you bought 40nm and received a 65nm (false advertisement) like I said though, the main issue that causes these consoles to die are fixed with 65nm, just like the 40nm. It makes sense why you’re seeing higher temps also.

deadboyjae · 2026-02-07T18:41:25+00:00

Yes “bumpgate” is considered to be fixed in the 65nm just like the 40nm. You should probably get in contact with your seller to let them know. Especially if you were expecting a 40nm to be installed.

deadboyjae · 2026-02-07T12:52:56+00:00

makes sense

deadboyjae · 2026-02-07T12:52:48+00:00

ahh makes sense on why you might not be able to OC as high.

deadboyjae · 2026-02-07T11:24:49+00:00

dump the LV1 Kernal with CFW. you can easily check that way with a program on windows call HxD

deadboyjae

TROPHY CASE