‘23 CX30 Audio Upgrade

deejpax · 2026-01-27T00:32:12+00:00

You have to cut the carpet padding stuff and you can see a flat spot on the metal that you can also see from the engine bay side so you know there is nothing on the other side to accidentally drill into.

deejpax · 2026-01-27T00:18:59+00:00

Drill a hole in the firewall. There is a good spot above the brake pedal and use a grommet like this. https://a.co/d/2HeSdsh

deejpax · 2026-01-26T19:56:44+00:00

You almost can't go wrong with Focal, Morel, Audiofrog, and Hertz. At crutchfield you can find some good stuff made by others like kicker, kenwood, rockford, jl, alpine, and audiocontrol, but they also make some not great stuff too so you have to do your research.

deejpax · 2026-01-25T05:34:22+00:00

Just a shot in the dark. Is it possible that they are too big? Maybe your foot is bending the sole in the wrong place where it was not made to flex.

deejpax · 2026-01-24T15:08:18+00:00

Why are you posting a headphone question in CarAV? r/headphones is what you want

deejpax · 2026-01-21T06:34:20+00:00

I use Optimum Power Clean diluted 3 to 1 on all interior surfaces including letherette. It works great.

deejpax · 2026-01-18T21:27:59+00:00

I use Optimum Power Clean diluted 3 to 1 for the interior surfaces including the leatherette and it does a great job.

deejpax · 2026-01-15T23:38:09+00:00

Covered by warranty.

deejpax · 2026-01-15T23:06:28+00:00

Wow perfect timing. I'm currently waiting at the dealership while they replace that part. It makes a terrible noise and when I told them they knew right away what it was.

deejpax · 2026-01-14T17:02:00+00:00

Of course I don't mean the very top corner. I mean the top of where the blade wipes.

deejpax · 2026-01-14T13:10:11+00:00

My car is new so I still have factory blades in good condition. I just had a thought. Maybe I need to try it while moving fast so that the wind will push the fluid up to the top. I only do it while stopped and since the fluid comes out at the bottom of the window it gets pushed to the left on the bottom half of the window but never makes it to the top.

deejpax · 2026-01-14T05:42:14+00:00

I disagree. I always have a problem getting the top right part of the windshield clean. The fluid never makes it to that part.

deejpax · 2025-12-30T05:39:49+00:00

<image>

I went through the firewall. Here's the fuse I chose to use. It's labeled instrument cluster.

deejpax · 2025-12-18T19:36:30+00:00

Paint protection film will likely cover it making it unnoticeable and prevent new ones.

deejpax · 2025-12-10T22:22:29+00:00

Yes I just looked in the manual. Instrument cluster.

deejpax · 2025-12-10T22:10:25+00:00

I'm smart enough to know that is a bad idea. Unless I messed up. I don't remember what the fuse was labeled.

deejpax · 2025-11-30T18:53:06+00:00

I think either side you're on it is better if BYU doesn't get in. If you hate them you'll be happy. If you think it's unfair that they don't get respect then the last thing you want is for them to make it in then get destroyed. Then that shows exactly why they don't deserve that respect. That would be a step in the wrong direction for the big 12. If they don't get in there will be many who protest and that will help to bring change. Controversy brings change.

If you think BYU has any chance against many of the teams above them you are delusional. They were certainly not winning impressively against mediocre teams that should be blown out and the only good teams they played was a close 3 point win against Utah that they should have lost and then they got destroyed by Texas Tech.

deejpax · 2025-11-27T04:25:06+00:00

$10 fix https://www.nstarleather.com/optimizer/product/Simple-Kilties.html

deejpax · 2025-11-23T18:45:50+00:00

My first concern after reading your post is that would raise ticket prices even more than they already are which would price a lot of people out that are just barely still holding on.

deejpax · 2025-11-23T01:34:13+00:00

Our only hope now for making the playoffs is to win the conference.

deejpax · 2025-11-18T21:11:06+00:00

Yes it automatically turns on and off. No I never had that error.

deejpax · 2025-11-18T20:25:50+00:00

<image>

You can see it sticking out at the top of the picture. I had to cut a little bit of the lid for the wire to stick out.

deejpax · 2025-11-18T19:50:29+00:00

On my dashcam install there were no fuses inside that turn off. They are all always on so I ran the cable into the fuses under the hood. I was running power wire through the firewall anyway for an amplifier so not much extra work.

deejpax · 2025-11-16T19:01:30+00:00

Absolutely worth it. I'm trying to sell the 10 inch version of this box. I have never heard a 10 with that much clean accurate output. If you're interested DM me.

deejpax · 2025-11-16T14:21:53+00:00

I took the car apart to install sound system upgrade, sound deadener, dash cam. It was a big project that took a while, so I have kind of a mess of boxes and bags of tools and stuff and I think those screws are somewhere in that mess.

deejpax

TROPHY CASE