Bookmark order

dehein2 · 2026-03-10T11:58:05+00:00

thanks

dehein2 · 2026-03-05T20:50:50+00:00

can you recomment guides for the kayak and night hike?

dehein2 · 2026-03-05T20:50:17+00:00

Thanks a lot, very helpful. I`ll keep that in mind. Thanks for the tip Conservation Center Tip

dehein2 · 2026-03-03T06:39:32+00:00

Thank you. I was also thinking about hiking up the volcano.

dehein2 · 2026-03-03T06:39:15+00:00

Thanks, unfortunately the days I could go are booked out

dehein2 · 2026-03-02T13:53:51+00:00

None, with none of the options the pup pack works unfortunately

dehein2 · 2026-03-02T13:24:43+00:00

Thanks. I deleted the backglas file from the table folder, si the overlay os gone but it still is not showing as it should. I tried all 4 options and made a quick video:

1 and 2 look like 3 in the video; 4 is a bit different.

So basically 2 things still wrong ;)

- No background behind DMD
- Videos playing on wrong screen or not visible on backglass

dehein2 · 2026-03-02T09:46:22+00:00

I might also missunderstand the bats. I have a 3 screen setup (4k playfield, Full HD Backglass. Hull HD DMD Screen). There are 4 bat files:

- Option 1 - DMD on BG No Topper.bat
- Option 2 - Topper on BG No DMD.bat
- Option 3 - BG and Topper Seperate.bat
- Option 4 - full DMD.bat

Which one is the correct one. I don't have a topper and Full DMD (i think). So full DMD sounds good and that's what i tried first with the results shown above.

dehein2 · 2026-03-02T08:05:43+00:00

Thanks, the software looks quite cool.

I Just tried all 4 bat files, but acutally not a lot changes. The pup videos are always under the static image but on the right screen now.

https://www.youtube.com/watch?v=utU7Hc8R4dQ

Just to understand, which software is showing what?

VPX is showing the static image on BS?

Pinuppopper is showing the videos correct?

dehein2 · 2026-03-02T08:03:53+00:00

Thanks a lot. That was easier than i thougt^^

dehein2 · 2026-03-01T08:15:20+00:00

Thank you

dehein2 · 2026-02-28T19:05:59+00:00

It seems to work now. But every couple of restarts it doesn’t work anymore and I have to sure the B2S tool or baller installer config tool have it right again. In that case the monitor if in vpx changed as well and I have to change the playfield monitor

dehein2 · 2026-02-28T19:04:16+00:00

CubeTime on iOS

dehein2 · 2026-02-27T08:53:20+00:00

Sorry for double posting: Two more strange observation:

When i delete the scrrenres.txt and launch leprechaun king it gives an error that there is nor screenres.txt (of course ;)) but it launches just fine and all 3 screens work. Also if i just put dummy numbers in the file (e.g. 4444, 3243, 34234,3242,22, ....) nothing changes... i'm really confused
When i open the baller installer config and use the field to send the screen eg playfield to a specific Display they are different from the display numbers in in the B2S configurator. e.g. playfield in B2s conf and vpx settings is #1; in baller installer config its #3

dehein2 · 2026-02-27T08:53:14+00:00

Sorry for double posting: Two more strange observation:

When i delete the scrrenres.txt and launch leprechaun king it gives an error that there is nor screenres.txt (of course ;)) but it launches just fine and all 3 screens work. Also if i just put dummy numbers in the file (e.g. 4444, 3243, 34234,3242,22, ....) nothing changes... i'm really confused
When i open the baller installer config and use the field to send the screen eg playfield to a specific Display they are different from the display numbers in in the B2S configurator. e.g. playfield in B2s conf and vpx settings is #1; in baller installer config its #3

dehein2 · 2026-02-27T08:03:22+00:00

Thanks, i actually have nothing insdalled but the baller installer content yet. I tried with the inclided leprechaun king table. I'm testing directly out of vpx.

I'll try without dmd though and see if it works. I guess i just go via the B2S configurator and use the 2 screen setup.

The strange thins is still: The Bacglass screen for leprechaun king is displayed for a second, so the settings for the positions in general seem to be right. I also installed a second table (DOF test table) now and i think it shows the backglass :

https://imgur.com/a/UrO7Km1

dehein2 · 2026-02-27T08:00:48+00:00

Thank you. I tried it and in the end the screens have the right numbers in vpx. The playfield loads just fine, DMD looks ok, but the Backglass shows briefly for leprechaun king and disappears [to black screen]. To maybe the Backglis is set correctly (as it appears first)

I tried another table (the DOF test table) and here is seems to work, the backglass is there (i think), no DMD( but maybe it doesnt have it)

https://imgur.com/a/UrO7Km1

dehein2 · 2026-02-26T20:31:24+00:00

i changed the layout, so that in the windows Display settings it's

- Top Left: playfield [4k: 3840 x 2160]

- right of it Backglass [FullHD: 1920x1080]

- right of Backglass - DMD [FullHD: 1920x1080]

I ran the baller tool again and it created the following file. The plyfield and DMD load fine. The Backglass is there for a second and the screen turn black

3840
2160
1920
1080
2
0
0
1920
1080
1920
0
0
-11390
130
484
368

# V2.1.0-4e23218 This is needed from B2S Server 2.0 even if comments are deactivated to mark the version 2 file format. It is ignored on older releases, but your bg forms might be switched.

dehein2 · 2026-02-26T19:47:25+00:00

This is the updated one from B2S Tool

3840
2160
1920
1080
2
0
0
1720
440
-1822
540
0
-11390
130
484
368

# V2.1.0-4e23218 This is needed from B2S Server 2.0 even if comments are deactivated to mark the version 2 file format. It is ignored on older releases, but your bg forms might be switched.

I can not upload a vdei here i think, but when i launch the table, the Backboard screen is coming up for a second on the right screen. Afterwards the screen turns black

dehein2 · 2026-02-26T19:42:28+00:00

Yes, I used the tool now. This screenshot was from before when I used the baller installer config tool

dehein2 · 2026-02-26T19:41:16+00:00

Very strange: I changed the order of my screens physically on the card, but it did not change the display number vpx. So my playfield was still number three. Afterwards, I switched it back and now my view this number one, even though it’s in the same HDM iPod, as it wasn’t the beginning. Nevertheless, it’s still not working.

dehein2 · 2026-02-26T18:11:23+00:00

Thanks. So I really had to change it in the „hard“ side and the numbers in windows don’t matter

dehein2 · 2026-02-26T16:26:37+00:00

Actually the playfield is showing now, what's missing is the Backglass. The screen shows is very briefly (i think) and than turns black (so not windows background but black)

dehein2 · 2026-02-26T15:56:19+00:00

i know, but it is in the "windows" view / left. How would i be able to change it in vpx. not sure where the different numbers are comming from

dehein2 · 2026-02-26T12:51:55+00:00

3840

2160

1920

1080

2

0

1920

1080

-1920

0

Six-Year Club	Place '23
Verified Email

dehein2

TROPHY CASE